S13 r33 brake setup up

[sr20viv]

Just got myself a cheap set of r33 brakes, front and rear, currently running z32 fronts and standard 13 rears and wandering what conversion lines are needed to complete the conversion.

I know db power used to do the conversion lines but believe they ceased trading a while ago ?

Also heard running a face lifted bmc would be adequate, is this correct ?

Thanks

[MEL]

Unless they are GTR brembos I dont see any reason to swap out what you have.

[sr20viv]

Because I'm going to be doing an rb swap some time soon

[Pete C]

IIRC the fronts are 296mm so bigger than S14/Z32 fronts, the rears are a good upgrade too. You might get away with an S14 BMC (BM50) but ideally you want a Z32 one (BM57, be careful, a lot of them are BM50 or even BM44 - stamped on the side), I wouldn't want to try it with a standard S13 BMC (BM44), facelift or otherwise.

The lines I'm not sure about TBH, not bought anything like that for yonks.

[sr20viv]

cheers Pete,

yeah still struggling to find somewhere that does the conversion lines