I've got a JDM S14a with Power FC, bought it fitted and it has no hand commander. One has come up for a S14 and I was wondering if the hand commanders are all generic to the Power FC unit? I know the loom is different between 14 and 14a's and my JDM 14a has no NATS, but if the FC is already fitted and working can I just plug and play the hand commander? Cheers.
There are a few different versions, the newer ones are usually backwards compatible.
Heres the model number of said commander
FCC3 020-25112
Cheers mate I'll have a look at mines when I'm out at the car later and check the serial number on it.Originally Posted by l44udo
That's a pretty late one
Do you think it will work?
What's the serial number on the PowerFC?
PFC SR2016020-0134 is the one I have. By the looks of the FC it's pretty old lol
Should work fine with an FCC3 commander
From what I can tell, the older serial no is YYMM - XXXX. The newer is ### - XXXX where ### is the batch number i.e 010, 020, 030. So it would appear I have a newish FC, but Ben is right that Hand Controller is the latest version. The serial number of it looks like it's a 415-X001 type, which upon googling means it should be compatible.
Before I commit to the buy do any gurus happen to know if I'm 100% correct?
Ha! Didn't see this before posting my latest post. Cheers mate.Should work fine with an FCC3 commander
For anyone else in a similar situation:
http://www.trinituner.com/v3/forums/...c.php?t=128244
That was useful for finding out what the part number of the FC was using the serial number on the unit itself. Mines starts with SR2016 therefor it was a 414-N016 part number.
I then googled the serial number of the Hand Commander (starting FCC3) to find its part number and went through FRSport using the part number to find compatibility.
Posting Permissions
Reply With Quote