Page 1 of 3 123 LastLast
Results 1 to 20 of 45

Thread: 200sx stage 1a s14.5(14a)

  1. #1
    Guest darrengodfrey's Avatar
    Join Date
    Feb 2013
    Location
    motherwell, scotland
    Posts
    740
    Rides
    0

    200sx stage 1a s14.5(14a)

    Decat pipe good condition -£40

    Stainless elbow - £30

    Apexi filter with good working s14a MAF - £40

    Standard airbox with good working s14a MAF - £30

    Blitz supersound trumpet BOV/Dumpvalve - £50

    Standard s14a diff - £50

    Gizzmo EBC think the solenoid is done on it but £40ish should get you a knew one if it is - £50

    Black doorcards with dents because rollcage has been pressed against them - £30

    DB power battery relocate kit, inc box for battery to go in - £50

    Chassis stuff

    R33 GTST front callipers with braided lines Nissan smoothed off and a brembo sticker on it, painted red - £100

    DB power 345mm brake upgrade discs have plenty of life, comes with brackets and spacers to be used with S14/GTST/z32 callipers - £100

    Tomei 3 point strutbrace rare piece of kit from what I believe, need abs removed to fit, has scratches from storage - £120

    Driftworks used rear subframe bushes - £30

    Exterior

    S15 headlights, will come with brackets and pigtails in case you are buying for conversion - £450

    S15 Nismo style FRP bonet from epr painted in matt black and has aerocatches fitted with all keys present 2 countersunk allen bolts missing from one aerocatch doesn't affect performance at all - £300

    S14.5 originlab front vented wings has a small hole where sideskirts were riveted on and mounting point for bumper needs fiberglassed or bracket made - £80

    Vertex style FRP skirts from EPR need refinishing and painting as they needed alterations to fit - £80

    Vertex style rear bumper by EPR has holes where riveted to overfender - £80

    EPR carbon wind deflectors, really love how these look on the car, few stress marks just like all carbon, very small chip out the drivers side one hardly noticeable - £80

    Rear lights, few marks here and there - £80

    FRP bootlid with no brakelight hole and no spoiler holes £120

    Located Motherwell Scotland



















    [/QUOTE]
    Last edited by darrengodfrey; 04-09-2014 at 07:32.

  2. #2
    Guest immy21's Avatar
    Join Date
    Mar 2009
    Location
    Edinburgh
    Posts
    7,176
    Rides
    0
    Il take the alignment arms back off you (and sell them back to you in 6 months lol). Just whenever your ready to remove them. I don't mind transferring £50 deposit, it's only fair mate.

    What tien are they? Condition?

  3. #3
    Guest darrengodfrey's Avatar
    Join Date
    Feb 2013
    Location
    motherwell, scotland
    Posts
    740
    Rides
    0
    Quote Originally Posted by immy21 View Post
    Il take the alignment arms back off you (and sell them back to you in 6 months lol). Just whenever your ready to remove them. I don't mind transferring £50 deposit, it's only fair mate.

    What tien are they? Condition?
    I only have the fronts fitted just down mate I never even got round to fitting the rears lol, yeah well mabey call it 6 years when I am a big boy again lol. A deposit is not required mate I know your a great guy

    Tien are superstreets if I remember rightly and all of them seem in good condition bar one of the rears have a small bit bit missing from the topmount mate.

  4. #4
    Guest
    Join Date
    Oct 2012
    Location
    southampton
    Posts
    559
    Rides
    0
    The ecu os that for s14 or s14a??

  5. #5
    Guest darrengodfrey's Avatar
    Join Date
    Feb 2013
    Location
    motherwell, scotland
    Posts
    740
    Rides
    0
    ECU
    Apex Arm Kit
    Coilvers spoken for just cant etdit the post for some reason.

  6. #6
    Guest
    Join Date
    Nov 2006
    Location
    Bucks
    Posts
    985
    Rides
    0
    Have u still got and how much for the stereo surround,heater panel surround and gearstick surround? They all ok with no broken clips etc?
    Oh and also the door pull trims and inside door handle/switch trims?

  7. #7
    Guest darrengodfrey's Avatar
    Join Date
    Feb 2013
    Location
    motherwell, scotland
    Posts
    740
    Rides
    0
    Quote Originally Posted by integra View Post
    Have u still got and how much for the stereo surround,heater panel surround and gearstick surround? They all ok with no broken clips etc?
    Oh and also the door pull trims and inside door handle/switch trims?
    Yeah i should have all the bits you speak of as interior is all
    In tact mostly, ehm say 35 posted

    Cheers.

  8. #8
    Guest
    Join Date
    Oct 2012
    Location
    aberystwyth
    Posts
    275
    Rides
    0
    any pics of fmic bent fins and scratches?

    Sent from my GT-I9300 using Tapatalk 2

  9. #9
    Guest darrengodfrey's Avatar
    Join Date
    Feb 2013
    Location
    motherwell, scotland
    Posts
    740
    Rides
    0
    You can just see the bent fins in the 3rd picture, i have no pictures od scratches just now.

  10. #10
    Guest
    Join Date
    Nov 2006
    Location
    Bucks
    Posts
    985
    Rides
    0
    Quote Originally Posted by darrengodfrey View Post
    Yeah i should have all the bits you speak of as interior is all
    In tact mostly, ehm say 35 posted

    Cheers.
    Ok cool. This might sound silly, but u got any pics of it all? They need to be good condition with all clips and bits etc.

  11. #11
    Guest
    Join Date
    Nov 2006
    Location
    Bucks
    Posts
    985
    Rides
    0
    Oh and u still got the harnesses?

  12. #12
    Guest lewys14a's Avatar
    Join Date
    May 2008
    Location
    Guisborough
    Posts
    6,298
    Rides
    0
    How much for the exhaust delivered ?

  13. #13
    Guest darrengodfrey's Avatar
    Join Date
    Feb 2013
    Location
    motherwell, scotland
    Posts
    740
    Rides
    0
    Quote Originally Posted by integra View Post
    Oh and u still got the harnesses?
    I will get pics for you mate, and they are reps and 2 diffherent types mate ones a good rep with fia tags and just says takata with eyebolts type, other says takata corp and is the put a bolt through it type

  14. #14
    Guest darrengodfrey's Avatar
    Join Date
    Feb 2013
    Location
    motherwell, scotland
    Posts
    740
    Rides
    0
    Quote Originally Posted by lewys14a View Post
    How much for the exhaust delivered ?
    Will be £10 extra for postage mate; cheers.

  15. #15
    Guest darrengodfrey's Avatar
    Join Date
    Feb 2013
    Location
    motherwell, scotland
    Posts
    740
    Rides
    0
    Quote Originally Posted by integra View Post
    Have u still got and how much for the stereo surround,heater panel surround and gearstick surround? They all ok with no broken clips etc?
    Oh and also the door pull trims and inside door handle/switch trims?
    Have just checked and all clips are all in tact, to be expected for a car that was standard when i got it but wanted to makr sure before i said yes, the door trims i dont quite understand what they are just the interior door handle switch things?

  16. #16
    Guest darrengodfrey's Avatar
    Join Date
    Feb 2013
    Location
    motherwell, scotland
    Posts
    740
    Rides
    0
    Also exhaust sold pendong payment and collection

  17. #17
    Guest
    Join Date
    Sep 2005
    Location
    Northamptonshire
    Posts
    21,374
    Rides
    0
    Hey man. From the other topic, how much do you want for the stereo surround?

  18. #18
    Guest
    Join Date
    Dec 2012
    Location
    Birmingham
    Posts
    35
    Rides
    0
    Do you still have the gear surround with clips intact for it to hold the gaitor in place?

  19. #19
    Guest darrengodfrey's Avatar
    Join Date
    Feb 2013
    Location
    motherwell, scotland
    Posts
    740
    Rides
    0
    Quote Originally Posted by piman2k View Post
    Hey man. From the other topic, how much do you want for the stereo surround?
    Ehm tenner?

  20. #20
    Guest darrengodfrey's Avatar
    Join Date
    Feb 2013
    Location
    motherwell, scotland
    Posts
    740
    Rides
    0
    Quote Originally Posted by mcrecovery View Post
    Do you still have the gear surround with clips intact for it to hold the gaitor in place?
    Yeah i do that, tenner if you are interested

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •