-
Guest
S15 open diff an a 'supposed vlsd' diff
Have a open diff in my s15 ATM bought a supposed vlsd diff from an s15 but doesn't bolt up so taking it that it's not an s15 diff? Here's a pic.
http://imageshack.com/a/img746/9230/nddEuW.jpg
The mounting points on front are different and back plate is different? Got sensor tho :/? The distance on the prop shaft joiner is longer on my 15 diff also.
Anyone got any info on what it's from? Or any way I can put the LSD into my casing or anything? The shaft outputs are the same
Last edited by jimlad5; 30-07-2014 at 21:25.
-
I <3 BBS LM
Couldn't see the picture...
Last edited by Actual_Ben_Taylor; 30-07-2014 at 23:12.
-
Guest
Yeah car was a spec s, so how'd I go about getting it in then? I need the subframe and different front mount bushes or sumit?
-
I <3 BBS LM
Oops sorry, pic was too small...
One on the right is from an S13, just swap all the bolt on bits over and use some different bolts for the front.
Last edited by Actual_Ben_Taylor; 30-07-2014 at 23:14.
-
Guest
Dint think s13s used a sensor on front though :/? Weird
-
Guest
You should have just bought a S14 Vlsd. Im pretty sure S15's didnt come with Vlsd's only open and helical.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules