Extended Wheel studs

[HarryW]

Right guys,

I've done a search, and gathered that the splines on the front and rear of the 200sx wheel studs are different. I've got some H&R 15mm wheel spacers and no studs (forgot to take them off the breaker ) does anybody have any idea at all where I can purchase just the studs, of around 65mm length, as I know the stocks are 45mm. Car is a 98' 14a non touring.

Any help would be superdooper

[Hugh Janus]

I bought some from rally design a few years ago, have a look on their site

[big_mac]

i bought my fronts from here
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=300511715650

i think they do rears but i didnt need them so cant tell you what ones to get

[HarryW]

These are the only ones that seem suitable on Rallydesign? Do you know if they fit? http://www.rallydesign.co.uk/product...ducts_id=14769

Cheers Big Mac, big help mate

[big_mac]

Going by this thread:
http://www.sxoc.com/vbb/showthread.p...ud+spline+size

these look like they will be the right ones
http://www.ebay.co.uk/itm/Nissan-Ext...item45f83b6847

[HarryW]

Holy mother of mary, £5 a stud! I think I may have to get on the old dog and bone to the guy I bought the Spacers from and go and get the studs off the car haha. Thanks again though, i'll most likely go for those if I can't find any cheaper ones

[big_mac]

do some googling matey, i just selected those to show you what to look for, there must be somebody that does them cheaper. What you could do i suppose is drill out the rears from 13mm to 14mm

[HarryW]

This is a very good shout sir, I could just take the hubs into work and bang them on the CNC machine to make sure they are drilled accurately , If I can't find any cheaper than £5 a pop I will most likely go down this route.

[NickS13]

for the fronts i got mine from rally design. for about 95p each. fitted perfect and im still using them now..

[waxb18]

just got off the phone with rally design...they are 63mm long
@95p each an absolute result

Sent from my GT-I9100 using Tapatalk 2

[suj]

just got off the phone with rally design...they are 63mm long
@95p each an absolute result

Sent from my GT-I9100 using Tapatalk 2

Fronts or backs?
Do you know the part number for future reference?

[waxb18]

For the fronts
Part no.SS41

http://www.rallydesign.co.uk/product...ducts_id=14769
Sent from my GT-I9100 using Tapatalk 2

[waxb18]

For the fronts
Part no.SS41

http://www.rallydesign.co.uk/product...ducts_id=14769
Sent from my GT-I9100 using Tapatalk 2

Ordered Yesterday at 14:30 was waiting for me when i got home today

[Ashleyyy]

bmuping this

so to confirm those above form rally design are 65mm long? and fit fine for the front yeah? in need of some cause i might need to run like 10-15mm spacers yo.

[Ashleyyy]

anyone confirm this please wanna order only cautious as they mention subaruuuu?

[NickS13]

ive got them fitted on the front of mine, with 10mm spacers and i had to cut them down by 10mm so my wheels nuts would fit.

so ye they are plenty big enough..

[S15_SAM]

Or just buy open ended wheel nuts!

[handsomedez]

Or just buy open ended wheel nuts!

Fine unless you've got internal drive wheel nuts

I got my fronts from a shop on eBay so I could fit 35mm spacers. Had to cut mine down about 10mm too. Sure I got 10 of them delivered for about £20.

[NickS13]

Or just buy open ended wheel nuts!

Fine unless you've got internal drive wheel nuts

ye i got internal drives, look alot cleaner and nicer when you have a decent set of wheels.

[MaccyD]

To rebump, i feel dirty buying parts that say Subaru. The faith you put in people youve never met before lol.