Anyone have any recommendations for tyre pressure when using Mickey Thompson street ET drag radials?
Anyone have any recommendations for tyre pressure when using Mickey Thompson street ET drag radials?
Remember being at pod with Richie trying these, think it was a case of keep lowering them till it made you slower... think 20psion start
Ta Ben, I'll try 20 psi and go from there
From memory, 9-11psig seemed to yield the best results
3rd Overall 2016 JDS Street Class Santa Pod
7th Overall 2013 JDS Street Class Santa Pod
8th Overall 2012 JDS Street Class Santa Pod
9th Overall 2011 JDS Street Class Santa Pod
2nd Overall 2010 Prostreet drag series Shakespear County Raceway
4th Overall in street class 2010 HKS drag series Santa Pod
2nd Place TOTB IX RWD Drag Shoutout
Best 1/4 Mile ... 10.96 @ 132mph Santa Pod October 2nd 2010
Better stock up on replacement driveshafts and necks Ken!!
Pretty sure he's running uprated drieshafts
Last edited by Actual_Ben_Taylor; 06-08-2010 at 15:43.
Big Tone gave me a kick told me to grow some balls and run them at 4psi but I suggest you start out higher. 4psi is note exactly the recomended level
Tried a few different pressures in the end, from 18 psi down to 11, lower pressures gave best results, 11.79@123 with 1.9 60ft, best terminal was 130, really pleased with that as the car is not set up for drag at all
you'll ruin the car if you go chasing numbers ken
just be happy with what you've acheived and work on your technique for next year