May be a silly question regarding the prop. But has anyone tried the 350z propshaft for size. Or does it end up too long with the transmission in an s body.
Type: Posts; User: M.D.
May be a silly question regarding the prop. But has anyone tried the 350z propshaft for size. Or does it end up too long with the transmission in an s body.
I'll have a look. I was going to use a set of Brian crower springs.
I had the flanges lazer cut ghost.
Yeah I kinda went for the full race design. It seems to be pretty common as you say. And it was a marked response and peak power increase over the log style one I had before for the scoob turbo.
...
Bit bigger than that. It's the same size as the turbo inlet.
You could put a t28 flange port inside the diameter easily. It's actually quite big
I like that idea jez. I may knock up a fitting :).
http://tapatalk.imageshack.com/v2/14/12/11/55c07ee603bcdaa3230882e153945d5f.jpg
This is the manifold I made.
Nope it was a totally unopened one. He melted a piston after a season of beating. So put a second hand one back in. And away he went. Had nothing more than a steel head gasket.
I've been watching a...
It's more common than you may think to be fair Ben.
If you google it there's reports all over the place. Well 430ish.
Paul (polo) was one of them.
The thing is. The engine was a fully rebuilt...
Im currently running 360 but we had to tail the boost off quick as if I held 1.3 bar to the redline the power just died and it sounds like the engine is fouling up. It's a noticeable change too.
I...
That was one mention but I wasn't sure how to do it without melting the gauge. Or pipe to the gauge.
I've heard about the springs being weak. And if I have to I'll pull the engine apart again and...
Hi I'm just looking for something and can't seem to find it anywhere.
I've been having issues with valve float on my SR. At high boost levels. (Anything above a bar) and past 6k.
It only does...
We would do the v mount properly and we have made one on an rx7 that worked brilliantly recently.
Even without any ducting as we first made it. It was a marked improvement over the stock set up. ...
Thankyou for all the replies.
I will definitely look into wrapping the manifold as that's always been a concern of mine.
The turbo itself isn't really possible as ive tried those blanket things...
Just thought I'd ask people's options.
Basically I use my car on track but when running high boost (1.3 bar) I can only get about 3-4 laps in before my pre set coolant limit Rev limiter kicks in at...
Just thought I'd throw my 2p in this one.
I had the same issue with my old HSD coilovers. One was about an inch difference in adjustment from one side of the car to the other. Made it more...
Ah that's right that's what I assumed. Thanks. Will be checking now.
We checked the ignition timing and it put the CAS about 3/4 to one side which sent alarm bells.
You sat first mark over from the right. I'm sure it was from the left but will check tonight to...
Just a very quick one. I couldn't find a definitive answer by searching just the usual about the position of the main toothed crank pulley.
I swapped the head on my friends s13 recently and as I...
I'll do that when I get back from Spain :). Will do one on a higher boost setting to show what happens.
I like your way of thinking mate. That's a fairly simple yet affective way of testing. :). Thankyou.
Sorry for the late reply. I thought I'd try and reply to the suggestions as I'm at a total loss and just going by what my mapper believes.
The issue is only boost related. It doesn't matter what...
Thankyou for the compliment on the manifold by the way. Spent a lot of hours making and researching what works and doesn't. This seemed to be the most effective design for good spool and power. It's...
The turbo made 430bhp on a car at 1.6 bar the week before so we know the turbo will happily do the power so it's 100% not that.
The AFR doesn't really change much when it happens either. So it's...
AFR is good. 11.5- 12 even when the power drops.
The only changing factor is the boost that causes it.
Is it possible for valves to bounce at such low revs with boost?
I've not been on here for a while but thought id ask you guys a question regarding my strange power issue I've had.
Basically I've recently fitted a turbo technics hybrid TD05 style turbo. I've...
Just a quick one. I'm just finishing off a headgasket for a friend and we can't remember which injector which wire goes on for number 2 + 3 injectors. The wires reach both but one of them has a much...