Search:

Small update;
No air leaks detected. I checked through the whole pressure piping, dump valve piston, vacuum hoses and the airflow piping.
Disconnected the MAF, ran pretty much the same.
Connected...

Norway has craazy strict exhaust rules, so I'm not taking any chances.
With the new rules that came last year too, they have to notify the road patrols if they suspect any form of tuning aswell.....

I've checked the z32, contact is in.
Ran smoothly with the other exhaust, it's been sitting for a week tho while changing but I've never had any troubles with it before

Edit;

it only stays alive if I floor the throttle all the way down

I've changed to the fabric exhaust as my MOT is up, and it's running horrible...

Went from 3" full exhaust (no cat) with 4.5" tip to the fabric s13 exhaust with catalysator and two silencers.
...

Alright thanks!

I've watched around on the map tracer and slowly learnt my way around leaning the mixture a little bit.

However,
can I lean out the mixture on the overall setup (every cell in the inj map) a...

Oh alright, thanks a lot Ben!
You're saving me some money and trouble here :D

Alright, thanks!

Yeah I have a wideband lambda sensor.
I don't understand much, I've just started reading about this the last two days, really. Why?

I found this on an instruction from APEXi:
------------------------------------------
(Idle)
- On the controller, go to [Setting] - set idle

And my mixture problem:
1. Let engine warm up and...

Holy shitballs, really?
THANKS. :D

My tune-guy is waay expensive and it's a 6 hour journey up to him, so I was just wondering on something..

Is it possible to adjust the map a little on the Apexi FC Controller?

It runs very rich...

Two jacks lifting on to the diff, ain't that alright?
It was just for a quick wheel change in the back, and a few shots of the diff.

Yeah I was afraid of that..
Thought about maybe if the whole differential had been replaced it wouldn't have looked like the fabric open one.. O'well, I'll have it down someday anyways. Thanks for...

92' s13 ca18det

Anyone with a good eye that can see what type of differential this is?
Wheelspin on both on dry tarmac, but no 'welded diff' noises when turning.

Limited slip? 2-way? Kaaz?...

Alright thanks, I'll try that!
Here's a little video I had on my phone on how it sits..

My tuner turned up the idle to around 1500rpm to keep it from stalling when running on high rpms to...

One of the pipes are straight ended, and yes, thats the one that keeps blowing off.. :wack:




Alright thanks!! :)

Is this the idle air controller valve on the intake?
- Have never seen the iac valve before, so don't laugh your ass off if its wrong :wack:

84465


AAAAAND,
I had my turbo overhauled around...

Yeah I have an electronic one, AVC-R by APEXi. I managed to get it down to 1.0 bar, on "high boost" setting, the other one is at 0.6 bar but it won't go below 1.0 bar now.. x) have to look into that..

:thumbs: :sxoc:

Late answer but, if people would like to know why and what caused that the dump valve wouldnt open;
I had the vacuum hose (from dv) connected to the wrong vacuum line, it needs to be mounted 'after...

Indeed, I know :)

Yeah I am, as soon as I get it out of the garage..
Think it has to be turned down via computer.

Thanks for answering my questions :thumbs:

I've always enjoyed that flutter sound tho, way more than ptshh... Fk, now Im confused xD
Just read an article about this on dw.. If its true it'll measure "incorrect" when running dv (as you...

Was close to getting a ssqv one from HKS, but it ended up not happnening..
So as I got this quick and easy from a colleauge I though, o'well, why not :)




I'm not gonna have recirculating...