Search:

so iv just got my new pump today and this ones a 342. this one has a teabag type filter something i didn't notice on my old pump im going to fit the pump this afternoon, and check the voltage going...

That's what I'm thinking, with wiring not being my strong point I wouldn't of thought wire too thick would carry too much current/voltage to the pump as it can only put through what I can put...

The wiring is as follows I did have a sub in the car so I used the thick power cable for the power as it was already ran through the car so I found it easier to use that it has a fuse already in the...

It's from eBay it's self it came in a different box tho sytec I think it said.. But the pump said walbro.. That's exactly what I thought the fuse in the box doesn't do naff all anymore It's...

Hi just wondering if anyone has had this happen before.. Had my car mapped the other week 400bhp had a walbro already on but was unsure of the age of this as if was already in the car running 300bhp...

No stick works fine it's a apexi power Fc l jetro


Sent from my iPhone using Tapatalk

Cheers for that got it all wired in correct, went to turn the key fuel pump makes a noise, turn key the car starts for a second then stops, the car will keep doing this there was nothing I could do...

Thanks iv managed that now but looking at the pin out chart my wires are different mines 100% uk car and the ammount of pins on the diagram are different to my car for example 104 isn't meant to have...

Is there a special way to get the pins out of the plug? Seem quite stuck in to me and I don't want to break somthing!!!

Hi just wondering what you guys do with the intake pipe from the Afm/maf to the turbo, the standard pipe Is rubber and I'm wondering will it stretch to fit over the z32 maf? If not what do you guys...

Cheers guys really helpful :)


Sent from my iPhone using Tapatalk

Hi all iv recently bought an aem wideband and will be fitting before the weekend, the wire that goes from the in car display unit is quite long, iv heard of the sensor being put in the decat? Iv also...

Allah good lads sorted it it was a wire on the harness that goes to the starter, real higher to get too small with a spade end on!! Cheers anyway!!

100% pal I was only there 5 min right outside my house good job I was where I was really and not sat at pod!!

Sitting in my car last night engine turned off but ignition on listening to music, the lights on the guages shorted out and came back on I thought this was odd and tried to start the car to make sure...

Had a search through can't find what I'm looking for if anyone had a link for the fuel pump mod I'd appreciate it! Iv been told the standard wiring to te pump causes resistance and needs to be wired...

So iv been on eBay and found these hks pulleys for an sr20det, in wondering will these fit hks stage 2 cams then I'll have rid of my ridiculous vvt noise!

I can't bare it no longer!!!

Here is...

I'll be on 500 miles tomorrow after iv been to Teesside and back to watch the bdc so not long now until I book her in for a map!! Cheers for the help guys much appreciated!!


Sent from my iPhone...

I have bc Springs aswell in my head I tried to upload a vid before of my engine making the noise but for some reason it won't upload, the noise goes away when it oil is up to 80-90 degrees I...

Cheers lads I'll have a look into that switch you've got there you don't have the link do you?

Iv got my cams already, from
What I understand they are the same cams regarding the vvt just different variations I'll see what happens when I have her in for mapping the vvt doesn't do any harm...

Cheers pal!! Iv been told you can turn the vvt off, inthink when I get it in for mapping that's what ill do! Thanks again!

Just rebuilt my car and I'm in the running in process, the car makes a rattle noise from the top end on the inlet side but then goes away after being driven for about 5 min , I'm sure it's VVT rattle...

Can't upload pics off my iPhone for some reason...

Fast idle test 1

Co max 0.30% - mine read 5.74%
Hc max 200ppm - mine read 239ppm
Lambda .97-1.03 - mine read .87

Fast idle test 2

Recently put my engine back in my s14 the internals are now different and the car, the car went for an mot today and she failed on emissions I knew it wouldn't pass but I
Wondering how rich is too...