stage 3 chip

[Rich200sx]

Hi,
Was wondering if you still have the last stage 3 kit availble or is it just the chips that are left??

I see you recommend 18 psi with your chip but ND reckon with the injectors and airflow meter i could run 20 - 22psi with your chip would it still be safe to wind the boost up a bit more from time to time or is it only safe to use 18 psi with the chip?
If not do you have any other options avalible that i could do this safely with.

Cheers RICH

[Jez]

Hi Rich

I only have the chips available at the moment.

The chip was mapped to run at 17-18psi because the T28h it is mapped for is pretty much maxed out at that level.

You may be able to run more boost but you'd have to retard the ignition so much that you'd make very little extra power.

Hope that helps
Cheers
Jez

[Rich200sx]

Would i be able to plug the your chip into the socket the nd stage 1 chip is placed in?
The ND chip finally got soldered in the ecu but by that time it was past its limit so if its a case of unplug one and plug in the other it would be alot less hassle than sending another chip to be soldered in!!
For payment do you accept credit or debit card?

Cheers Rich

[Jez]

Yes - my chip will plug in the socket no problems.

Unfortunately I don't take credit/debit cards at the moment. I can take: Paypal, cheque, bank transfer, cash and postal orders.

Remember that to use the stage 3 chip you need to fit 444cc injectors and a Z32 AFM at the same time :)

Cheers
Jez

[Rich200sx]

Brilliant!!!

Getting hold of the 444s and a z32 is no prob i have already sourced some just in case you didnt have!

Paypal would be fine ill arrange payment on friday (its payday) so ill drop you a mail for the details.

How long can i expect for delivery if paid with paypal?
And how much for the chip by its self?

Cheers Rich

[Rich200sx]

Sorry forgot to ask is there anything else i need apart from your chip to run the z32 and injectors??
Dont need to use a fuel computer or anything?
Is the z32 a case of spicing a few wires or is there an adaptor needed to fit it?

Cheers Again
Rich

[Jez]

As soon as I get the Paypal payment I'll send the chip - so you should get it in a couple of days. The total cost (inc delivery) is £182 (I have to add 4% to paypal transactions to cover their charges :( )

I think bren sells the Z32 AFM adaptors or you can bodge something together - I'd recommend doing it properly though. A wiring diagram is on my web site :)

You won't need a fuel computer unless you want to do any fine tuning.