Apex stainless shiny parts group buy

[bren]

1: turbonutter - S14 Stainless Intake Pipe kit (standard AFM)
2: immy21 - S14 Stainless Z32 Intake Pipe Kit
3: steve_20085 - S14 Stainless Z32 Intake Pipe Kit
4: dave_t - S14 Stainless Intake Pipe kit (standard AFM)
5: dave_t - S14 Stainless Z32 Intake Pipe Kit
6: Sean-B - S14 Stainless Z32 Intake Pipe Kit
7: MapBoy - S14 Stainless Z32 Intake Pipe Kit
8: JC SX - S14 Stainless Z32 Intake Pipe Kit
9: weiner_patrol - S14 Stainless Z32 Intake Pipe Kit
10: boundsw - S14 Stainless Intake Pipe kit (standard AFM)
11: KamS14A - S14 Stainless Intake Pipe kit (standard AFM)
12: iow200sx - Stainless battery cover
13: jonny s14 - Stainless battery cover
14: swindon_s14 - Stainless fuse box cover
15: KINGHORN - S14 Stainless Z32 Intake Pipe Kit + S14 Stainless Cold Pipe Kit
16: DJBB - S14 Stainless Intake Pipe kit (standard AFM)
17: JackM - S14 Stainless Intake Pipe kit (standard AFM)
18: zyxel - S14 Stainless Exhaust Manifold Cover

Theres evident demand for a shiny parts group buy so here we are.

What shiny bits do we offer?

S14 Stainless Cold Pipe Kit:

http://www.apexperformance.co.uk/catalog/images/IMG_0360lg.jpg

S14 Stainless Hotpipe Kit:

http://www.apexperformance.co.uk/catalog/images/Untitled-1hotpipelg.jpg

S14 Stainless Intake Pipe kit (standard AFM):

http://www.apexperformance.co.uk/catalog/images/intakekit.jpg

S14 Stainless Z32 Intake Pipe Kit:

http://www.apexperformance.co.uk/catalog/images/IMG_0011lg.jpg

S14 Stainless Exhaust manifold Cover:

http://www.apexperformance.co.uk/catalog/images/manifoldcover.jpg

Stainless Battery Cover:

http://www.apexperformance.co.uk/catalog/images/IMG_0002lg.jpg

Stainless Fuse Box lid:

http://www.apexperformance.co.uk/catalog/images/fuselg.jpg

Prices:

S14 Stainless Cold Pipe Kit £65
S14 Stainless Hotpipe Kit £49.95
S14 Stainless Intake Pipe kit (standard AFM) £79
S14 Stainless Z32 Intake Pipe Kit £79
S14 Stainless Exhaust manifold Cover £24.50
Stainless Battery Cover £29.50
Stainless Fuse Box lid £29.50

GB prices:

If we get 5 or more orders for any of the parts then Ill do the following prices.

S14 Stainless Cold Pipe Kit £39.50
S14 Stainless Hotpipe Kit £37.50
S14 Stainless Intake Pipe kit (standard AFM) £54.50
S14 Stainless Z32 Intake Pipe Kit £54.50
S14 Stainless Exhaust manifold Cover £14.50
Stainless Battery Cover £14.50
Stainless Fuse Box lid £19.50

[turbonutter]

Intake pipe please :)

[bren]

1: turbonutter - S14 Stainless Intake Pipe kit (standard AFM)

[immy21]

S14 Stainless Z32 Intake Pipe Kit for me please

Any chance of adding Apexi filters into the GB?
Im after one to bolt onto the Z32 MAF, my old is mankey so would prefer to bin it anyway.

[iow200sx]

will the battery cover fit an s13 with a standard battery??

[steve_20085]

Z32 intake please.

[dave_t]

1: turbonutter - S14 Stainless Intake Pipe kit (standard AFM)
2: dave_t - S14 Stainless Intake Pipe kit (standard AFM)

(i take it that it will fit an S15?)

[Sean-B]

I'll take a stainless Z32 intake

[bren]

1: turbonutter - S14 Stainless Intake Pipe kit (standard AFM)
2: immy21 - S14 Stainless Z32 Intake Pipe Kit
3: steve_20085 - S14 Stainless Z32 Intake Pipe Kit
4: dave_t - S14 Stainless Intake Pipe kit (standard AFM)
5: Sean-B - S14 Stainless Z32 Intake Pipe Kit


Any chance of adding Apexi filters into the GB?
Im after one to bolt onto the Z32 MAF, my old is mankey so would prefer to bin it anyway.

Ill get some prices :)


will the battery cover fit an s13 with a standard battery??

I believe so yes.


Z32 intake please.

Added.


1: turbonutter - S14 Stainless Intake Pipe kit (standard AFM)
2: dave_t - S14 Stainless Intake Pipe kit (standard AFM)

(i take it that it will fit an S15?)

Yes it will fit, added.


I'll take a stainless Z32 intake

Done.

[MapBoy]

Z32 intake pipe please.

[Aerodynamik]

Nothing for CA18 S13 coming up?

[bren]

1: turbonutter - S14 Stainless Intake Pipe kit (standard AFM)
2: immy21 - S14 Stainless Z32 Intake Pipe Kit
3: steve_20085 - S14 Stainless Z32 Intake Pipe Kit
4: dave_t - S14 Stainless Intake Pipe kit (standard AFM)
5: Sean-B - S14 Stainless Z32 Intake Pipe Kit
6: MapBoy - S14 Stainless Z32 Intake Pipe Kit


Z32 intake pipe please.

Added.


Nothing for CA18 S13 coming up?

I havent seen any real demand for shiny bits for the S13 so we havent produced anything. :(

[JC SX]

Z32 intake please

[bren]

1: turbonutter - S14 Stainless Intake Pipe kit (standard AFM)
2: immy21 - S14 Stainless Z32 Intake Pipe Kit
3: steve_20085 - S14 Stainless Z32 Intake Pipe Kit
4: dave_t - S14 Stainless Intake Pipe kit (standard AFM)
5: Sean-B - S14 Stainless Z32 Intake Pipe Kit
6: MapBoy - S14 Stainless Z32 Intake Pipe Kit
7: JC SX - S14 Stainless Z32 Intake Pipe Kit


Z32 intake please

Added :)

[weiner_patrol]

Got a end of group buy date?

[bren]

We now have the required numbers so from tommorrow people can just come and take them at the special price. I dont have a finish date for the offer but itll run to Christmas at least :)

[weiner_patrol]

Put me down for a S14 Stainless Z32 Intake Pipe Kit please then :)

[boundsw]

S14 Stainless Intake Pipe kit (standard AFM) please.

Poss Mainfold cover - do you have any pics fitted ?

[bren]

1: turbonutter - S14 Stainless Intake Pipe kit (standard AFM)
2: immy21 - S14 Stainless Z32 Intake Pipe Kit
3: steve_20085 - S14 Stainless Z32 Intake Pipe Kit
4: dave_t - S14 Stainless Intake Pipe kit (standard AFM)
5: Sean-B - S14 Stainless Z32 Intake Pipe Kit
6: MapBoy - S14 Stainless Z32 Intake Pipe Kit
7: JC SX - S14 Stainless Z32 Intake Pipe Kit
8: weiner_patrol - S14 Stainless Z32 Intake Pipe Kit
9: boundsw - S14 Stainless Intake Pipe kit (standard AFM)


Put me down for a S14 Stainless Z32 Intake Pipe Kit please then :)

Done


S14 Stainless Intake Pipe kit (standard AFM) please.

Poss Mainfold cover - do you have any pics fitted ?

Intake pipe kit added, I dont have a manifold pic to hand but Ill see if I can dig one out.

[turbonutter]

Will call tomorrow and pay :)

[KamS14A]

Intake standard for me please


Sent from my iPhone using Tapatalk

[iow200sx]

can you put me down for a battery cover please??

also for the s13 have you thought about covers for both the fuse boxes as they are god dam ugly. and a stainless coilpack cover that actually fits properly.. im sure those 3 items would sell out..

[bren]

1: turbonutter - S14 Stainless Intake Pipe kit (standard AFM)
2: immy21 - S14 Stainless Z32 Intake Pipe Kit
3: steve_20085 - S14 Stainless Z32 Intake Pipe Kit
4: dave_t - S14 Stainless Intake Pipe kit (standard AFM)
5: Sean-B - S14 Stainless Z32 Intake Pipe Kit
6: MapBoy - S14 Stainless Z32 Intake Pipe Kit
7: JC SX - S14 Stainless Z32 Intake Pipe Kit
8: weiner_patrol - S14 Stainless Z32 Intake Pipe Kit
9: boundsw - S14 Stainless Intake Pipe kit (standard AFM)
10: KamS14A - S14 Stainless Intake Pipe kit (standard AFM)
11: iow200sx - Stainless battery cover


Will call tomorrow and pay :)

No probs :)


Intake standard for me please

Added :)


can you put me down for a battery cover please??

also for the s13 have you thought about covers for both the fuse boxes as they are god dam ugly. and a stainless coilpack cover that actually fits properly.. im sure those 3 items would sell out..

Added. If I se evidence of demand for the other bits then I will look into having them made :)

[boundsw]

Ok, so looks like we have the numbers in 1 day - this must be the fastest group buy ever ! :)
Will have to organise fundage to pay faster than i thought !:thumbs:

[JC SX]

When can we pay!

[MapBoy]

When can we pay!

See post 16 mate :thumbs:
Can pay from the morra.

[dave_t]

i'll have an 'S14 Stainless Z32 Intake Pipe Kit' too, may upgrade to a Z32 in the near future :D

list updated:

1: turbonutter - S14 Stainless Intake Pipe kit (standard AFM)
2: immy21 - S14 Stainless Z32 Intake Pipe Kit
3: steve_20085 - S14 Stainless Z32 Intake Pipe Kit
4: dave_t - S14 Stainless Intake Pipe kit (standard AFM)
5: dave_t - S14 Stainless Z32 Intake Pipe Kit
6: Sean-B - S14 Stainless Z32 Intake Pipe Kit
7: MapBoy - S14 Stainless Z32 Intake Pipe Kit
8: JC SX - S14 Stainless Z32 Intake Pipe Kit
9: weiner_patrol - S14 Stainless Z32 Intake Pipe Kit
10: boundsw - S14 Stainless Intake Pipe kit (standard AFM)
11: KamS14A - S14 Stainless Intake Pipe kit (standard AFM)
12: iow200sx - Stainless battery cover

[DoonanS14A]

What are the chances of this gb going till the new year? I realy want some stuff but i have no mOney at the mo

[bren]

Ok, so looks like we have the numbers in 1 day - this must be the fastest group buy ever ! :)
Will have to organise fundage to pay faster than i thought !:thumbs:


When can we pay!


See post 16 mate :thumbs:
Can pay from the morra.

As said, we have the numbers so you can pay when you are ready. Note that no parts will be held for anyone without payment. Your name being on the list doesnt mean youll have parts saved as we have had too many people say they want parts, we hold then and they never come back to pay :(

Stock is currently good on all parts but the interest is high. :)

You can phone and pay by card on 01274 683633 or if you want to pay by Paypal then send me your Paypal address and Ill send you a Paypal invoice :)


i'll have an 'S14 Stainless Z32 Intake Pipe Kit' too, may upgrade to a Z32 in the near future :D

list updated:

1: turbonutter - S14 Stainless Intake Pipe kit (standard AFM)
2: immy21 - S14 Stainless Z32 Intake Pipe Kit
3: steve_20085 - S14 Stainless Z32 Intake Pipe Kit
4: dave_t - S14 Stainless Intake Pipe kit (standard AFM)
5: dave_t - S14 Stainless Z32 Intake Pipe Kit
6: Sean-B - S14 Stainless Z32 Intake Pipe Kit
7: MapBoy - S14 Stainless Z32 Intake Pipe Kit
8: JC SX - S14 Stainless Z32 Intake Pipe Kit
9: weiner_patrol - S14 Stainless Z32 Intake Pipe Kit
10: boundsw - S14 Stainless Intake Pipe kit (standard AFM)
11: KamS14A - S14 Stainless Intake Pipe kit (standard AFM)
12: iow200sx - Stainless battery cover

No problem :)


What are the chances of this gb going till the new year? I realy want some stuff but i have no mOney at the mo

The offer will be on as long as there is continued demand and we have stock :)

[boundsw]

PM'd for Paypal invoice :)

[dave_t]

pm'd for invoice

[dave_t]

paid for in full - look forward to receiving them!

[MapBoy]

Ordered mine this morning. Already been dispatched too. :thumbs:

[PickleS13]

also for the s13 have you thought about covers for both the fuse boxes as they are god dam ugly. and a stainless coilpack cover that actually fits properly.. im sure those 3 items would sell out..



If I see evidence of demand for the other bits then I will look into having them made :)

I'd definately be interested in the above bits if you made them!

[boundsw]

Paid this morning - Cheers

[weiner_patrol]

Can you send an invoice via my paypal account please? I will pm you with the details.

[MapBoy]

And recieved. Cheers for the swift delivery. :thumbs:

[jonny s14]

stainless battery cover please

[iow200sx]

hi bren can you send me an invoice for my battery cover please.

nickbell1988@homtail.co.uk

cheers
nick

[bren]

Ill send out invoices etc on Monday :)

[Adams]

Is it possible to get the z32 maf intake pipe with black silicone couplers Bren?

Sent from HAL-I9000 using Tapatalk

[bren]

They come with blue connectors, if we supply black they will be charged over and above the blue ones.

[swindon_s14]

Fuse box cover please how do I pay ?

[bren]

If you want to pay by card then give us a ring on 01274 683633. If you want to pay by Paypal then let me know your Paypal address and Ill send you an invoice :)

[bren]

1: turbonutter - S14 Stainless Intake Pipe kit (standard AFM)
2: immy21 - S14 Stainless Z32 Intake Pipe Kit
3: steve_20085 - S14 Stainless Z32 Intake Pipe Kit
4: dave_t - S14 Stainless Intake Pipe kit (standard AFM)
5: dave_t - S14 Stainless Z32 Intake Pipe Kit
6: Sean-B - S14 Stainless Z32 Intake Pipe Kit
7: MapBoy - S14 Stainless Z32 Intake Pipe Kit
8: JC SX - S14 Stainless Z32 Intake Pipe Kit
9: weiner_patrol - S14 Stainless Z32 Intake Pipe Kit
10: boundsw - S14 Stainless Intake Pipe kit (standard AFM)
11: KamS14A - S14 Stainless Intake Pipe kit (standard AFM)
12: iow200sx - Stainless battery cover
13: jonny s14 - Stainless battery cover
14: swindon_s14 - Stainless fuse box cover


stainless battery cover please

How do you wnat to pay? You can phone us on 01274 683633 and pay by card or send me your Paypal address and Ill send an invoice.


hi bren can you send me an invoice for my battery cover please.

nickbell1988@homtail.co.uk

cheers
nick

Will do Monday :)


Fuse box cover please how do I pay ?

See above :)

[KINGHORN]

Il take a z32 intake and a hot pipe please

[DJBB]

Can you put me down for 1 x S14 Stainless Intake Pipe kit (standard AFM) please

Can you supply the hoses & clips for the hot & cold pipe separately? As I have some how managed to lose mine :facepalm:

[JackM]

Can you put me down for 1 x S14 Stainless Intake Pipe kit (standard AFM) cheers :)
Can i pay via Paypal too?
Thanks
Jack

Also i have the pidgeon mod installed. Will i need extra pipping to put the bung onto the stainless pipe?

[JC SX]

Received my z32 mad adaptor pipe today, looked at it and noticed the larger silicone joiner is small in comparison to the big end of the pipe, does it have to be stretched onto it?

[MapBoy]

Received my z32 mad adaptor pipe today, looked at it and noticed the larger silicone joiner is small in comparison to the big end of the pipe, does it have to be stretched onto it?

Mine is the same. Looks to be a fair bit to small. I was planning on getting other silicone joiners anyway as my bay has red ones.

[JC SX]

Im wondering what bren will charge for the black set as I'm keeping my engine bay stealth and keeping everything out of sight

[bren]

1: turbonutter - S14 Stainless Intake Pipe kit (standard AFM)
2: immy21 - S14 Stainless Z32 Intake Pipe Kit
3: steve_20085 - S14 Stainless Z32 Intake Pipe Kit
4: dave_t - S14 Stainless Intake Pipe kit (standard AFM)
5: dave_t - S14 Stainless Z32 Intake Pipe Kit
6: Sean-B - S14 Stainless Z32 Intake Pipe Kit
7: MapBoy - S14 Stainless Z32 Intake Pipe Kit
8: JC SX - S14 Stainless Z32 Intake Pipe Kit
9: weiner_patrol - S14 Stainless Z32 Intake Pipe Kit
10: boundsw - S14 Stainless Intake Pipe kit (standard AFM)
11: KamS14A - S14 Stainless Intake Pipe kit (standard AFM)
12: iow200sx - Stainless battery cover
13: jonny s14 - Stainless battery cover
14: swindon_s14 - Stainless fuse box cover
15: KINGHORN - S14 Stainless Z32 Intake Pipe Kit + S14 Stainless Cold Pipe Kit
16: DJBB - S14 Stainless Intake Pipe kit (standard AFM)
17: JackM - S14 Stainless Intake Pipe kit (standard AFM)


Il take a z32 intake and a hot pipe please

Added, just give us a shout to finalise the order. Phone to pay by card, send me your Paypal address to pay by Paypal :)


Can you put me down for 1 x S14 Stainless Intake Pipe kit (standard AFM) please

Can you supply the hoses & clips for the hot & cold pipe separately? As I have some how managed to lose mine :facepalm:

Done. We arent showing stock of the silicons and clamps but we are having a look round for you :)


Can you put me down for 1 x S14 Stainless Intake Pipe kit (standard AFM) cheers :)
Can i pay via Paypal too?
Thanks
Jack

Also i have the pidgeon mod installed. Will i need extra pipping to put the bung onto the stainless pipe?

Added. Youll need a length of silicon to put the bung in, yes. Ill see if we have some...


Received my z32 mad adaptor pipe today, looked at it and noticed the larger silicone joiner is small in comparison to the big end of the pipe, does it have to be stretched onto it?

It is a tight fit but it will go on. Put your hand inside the pipe and run the edge of the silicon over the lip.


Mine is the same. Looks to be a fair bit to small. I was planning on getting other silicone joiners anyway as my bay has red ones.

As above, they are tight but not excessively though.


Im wondering what bren will charge for the black set as I'm keeping my engine bay stealth and keeping everything out of sight

Ill check :)

[zyxel]

Put me down for a S14 Stainless Exhaust Manifold Cover if they're £14.50!

Do these come with the two bolts to fit it?

[DJBB]

Done. We arent showing stock of the silicons and clamps but we are having a look round for you :)

Cheers Bren, will call to pay later this week :thumbs:

[bren]

Can you put me down for 1 x S14 Stainless Intake Pipe kit (standard AFM) cheers :)
Can i pay via Paypal too?
Thanks
Jack

Also i have the pidgeon mod installed. Will i need extra pipping to put the bung onto the stainless pipe?

We can chuck in some extra silicon for the pidgeon mod. Make sure you ask for it thought!


Can you put me down for 1 x S14 Stainless Intake Pipe kit (standard AFM) please

Can you supply the hoses & clips for the hot & cold pipe separately? As I have some how managed to lose mine :facepalm:

We have a used E90 Samco that I can chuck in free of charge but I cant find any straight 51mm :(

The clamps are £2 each.


Put me down for a S14 Stainless Exhaust Manifold Cover if they're £14.50!

Do these come with the two bolts to fit it?

They dont come with the bolts, no.


Cheers Bren, will call to pay later this week :thumbs:

Ok :)

[bren]

1: turbonutter - S14 Stainless Intake Pipe kit (standard AFM)
2: immy21 - S14 Stainless Z32 Intake Pipe Kit
3: steve_20085 - S14 Stainless Z32 Intake Pipe Kit
4: dave_t - S14 Stainless Intake Pipe kit (standard AFM)
5: dave_t - S14 Stainless Z32 Intake Pipe Kit
6: Sean-B - S14 Stainless Z32 Intake Pipe Kit
7: MapBoy - S14 Stainless Z32 Intake Pipe Kit
8: JC SX - S14 Stainless Z32 Intake Pipe Kit
9: weiner_patrol - S14 Stainless Z32 Intake Pipe Kit
10: boundsw - S14 Stainless Intake Pipe kit (standard AFM)
11: KamS14A - S14 Stainless Intake Pipe kit (standard AFM)
12: iow200sx - Stainless battery cover
13: jonny s14 - Stainless battery cover
14: swindon_s14 - Stainless fuse box cover
15: KINGHORN - S14 Stainless Z32 Intake Pipe Kit + S14 Stainless Cold Pipe Kit
16: DJBB - S14 Stainless Intake Pipe kit (standard AFM)
17: JackM - S14 Stainless Intake Pipe kit (standard AFM)
18: zyxel - S14 Stainless Exhaust Manifold Cover


Put me down for a S14 Stainless Exhaust Manifold Cover if they're £14.50!

Do these come with the two bolts to fit it?

Added :)

[boundsw]

Got mine today ! :thumbs:

Just wish the garage was not full of crap, or it wernt raining !! :)

[croustibat]

Hi there ! Couple of questions here. I have a CA with a T28 and an S14 MAF in an S13,( oem mani). And i want to recirc my bov, which can have a 1" or 1.25" outlet ... basically, i need your S14 intake pipe, that would be perfect !

Can you test fit it to an S13, to see if it clears turbo actuator and PAS pump ? If so count me in !

i am also looking for a hose to connect bov and intake. If you have some, i am interested in that too.

thanks !

[bren]

We dont have an S13 to test fit it on Im afraid :(

[croustibat]

ok, can you take a pic of it next to an S13 elephant trunk then ? i will have a look in my engine bay to check. Or i could take pics of the engine bay to help you.

[bren]

We dont have an S13 elephant trunk either, sorry. Im not trying to be unhelpful but we dont have a local development car :(

[croustibat]

I will try to compare my S13 trunk to an S14 oem trunk then. If yours has the same dimension as the oem S14 one it should fit... the recirc pipe might be a problem though, as we dont have one on the S13. how long is it ? what is its diameter ?

Sorry for asking so many questions :o

[bren]

Spout length 90mm, diameter 26.5mm.

[zyxel]

Hi Bren

Would you be able to supply the two bolts required for the stainless exhaust manifold shield? If you need extra dollar for these let me know.

I'm presuming they are the same bolts (I don't know what size they are) that are supplied with the engine damper bracket.

[Sideways14a]

Bren,
Does the Stainless coldpipe kit come with a samco to the throttle body and DV? If not then can you acquire them and how much?

Will be interested in the coldpipe and z32 intake kits :)

[croustibat]

pic of an S13 elephant trunk:
http://i111.photobucket.com/albums/n140/nigrab0f/IMG_0948.jpg

I could find pics of an S14 oem one but it looks like your stainless one is shorter, so the MAF might not sit at a right place. I will try to measure the total height of mine and of an S14 one.

[bren]

Hi Bren

Would you be able to supply the two bolts required for the stainless exhaust manifold shield? If you need extra dollar for these let me know.

I'm presuming they are the same bolts (I don't know what size they are) that are supplied with the engine damper bracket.

We dont have the bolts Im afraid.


Bren,
Does the Stainless coldpipe kit come with a samco to the throttle body and DV? If not then can you acquire them and how much?

Will be interested in the coldpipe and z32 intake kits :)

It doesnt no but Ive just made an enquiry to see if theyre available :)


pic of an S13 elephant trunk:
http://i111.photobucket.com/albums/n140/nigrab0f/IMG_0948.jpg

I could find pics of an S14 oem one but it looks like your stainless one is shorter, so the MAF might not sit at a right place. I will try to measure the total height of mine and of an S14 one.

ok :)

[zyxel]

We dont have the bolts Im afraid.

No probs. Could you take me off the list please, ain't much point without the bolts.

[croustibat]

i'll take an S14 Stainless Intake Pipe kit (standard AFM) . If it does not fit i will either cut & weld or sell it again ...

I am not in a hurry, if you want to treat the order in january it is no problem. Just send me a paypal invoice when you are ready .

[Ann]

Hey croustibat, apologies for the delay.

Bren is now out of the office until January the 3rd so i'm picking up on a few bits for him. Could you PM me your paypal email address and I'll send you an invoice to pay :)

Regards, Louise.

[adz87kc]

If this is still running could you put me down for an intake pipe to fit a Z32 MAF please?

[Adams]

Hi, how much would shipping to Warsaw Poland be for two S14 intake pipes - one standard and one for the Z32 MAF?
thanks!

[iow200sx]

hi bren can you send me an invoice for my battery cover please.

nickbell1988@homtail.co.uk

cheers
nick

forgot about this, can i get an invoice please?

cheers
nick

[DoonanS14A]

Can i order an s14 hot pipe kit and the s14 Z32 intake pipe kit please. Can you send me an invoice so i can pay through paypal.

Cheers

[croustibat]

Hi there, i juste paid mine. I forgot to add a message though ... If you need the transaction number to identify it, just send a PM.

thanks ;)

[Ann]

If this is still running could you put me down for an intake pipe to fit a Z32 MAF please?

This is still running, please give us a call to make your payment or send me your paypal address and i'll send you an invoice to pay. :)


Hi, how much would shipping to Warsaw Poland be for two S14 intake pipes - one standard and one for the Z32 MAF?
thanks!

Shipping would be £34.99. You can order anything up to 30kg with this shipping cost, so if there is anything else that you need, please let me know.


forgot about this, can i get an invoice please?

cheers
nick

Invoice on it's way :)


Hi there, i juste paid mine. I forgot to add a message though ... If you need the transaction number to identify it, just send a PM.

thanks ;)

Thanks, I'll let you know if we need it but i'm sure it will be fine. :)

[Adams]

Shipping would be £34.99. You can order anything up to 30kg with this shipping cost, so if there is anything else that you need, please let me know.

That's a bit steeper than I thought... So one more question how about the same order (Z32 intake pipe and s14a stock intake pipe) + maybe two braided tubby hoses and some fire sleeving shipped to Derby? Would it be much cheaper?
Thanks again!

[Ann]

It would be £12 but if you have not ordered before it would need to go to the card registered address unless you pay by another method such as paypal or bank transfer. :)

[Adams]

It would be £12 but if you have not ordered before it would need to go to the card registered address unless you pay by another method such as paypal or bank transfer. :)

Thanks - I'll get back to you very soon. And I did purchase from you quite a few times now plus will be paying by paypal.
cheers!

[Ann]

Ok, no problem. :)

[iow200sx]

hi ann just checked and i never got an invoice. could you send me another one please?

[Ann]

It was because your paypal address was incorrect (nickbell1988@homtail.co.uk) and I just copied and pasted it when I did your order. I've ammended this now and sent you a new invoice :)

[iow200sx]

oops, didnt notice i have just paid anyway... :thumbs:

[Ann]

Thank you :)

[Adams]

After some delay I can confirm that my order will be 1x standard s14 intake pipe, 1x s14 intake pipe for z32 afm and 1m of your 14mm heat sleeving for a try. Shipping will be to Derby after all. Please send me a paypal invoice to adam_luranc@o2.pl .
Thanks!

[Ann]

Invoice on it's way :)

[DoonanS14A]

Can i order an s14 hot pipe kit and the s14 Z32 intake pipe kit please. Can you send me an invoice so i can pay through paypal.

Cheers

[Ann]

Please send me your paupal address so that I can send you an invoice. This way just helps us keep orders simple and allocate funds correctly. :)

[DoonanS14A]

Ok its doonan08@hotmail.co.uk

[Ann]

Invoice on its way :)

[Ann]

Invoice on its way. :)

[DoonanS14A]

Thanks and paid for.

[Ann]

Thank you :)

[Ann]

After some delay I can confirm that my order will be 1x standard s14 intake pipe, 1x s14 intake pipe for z32 afm and 1m of your 14mm heat sleeving for a try. Shipping will be to Derby after all. Please send me a paypal invoice to adam_luranc@o2.pl .
Thanks!

Can you pm me with the Derby address as this is not in your paypal info. Please use ref 18765 when replying. Thanks :)

[motoraton]

I guys,a little questions,i have a intercooler from R-34 Gtt and i looking a kit for adapt in my S14,the hot and cool pipe are compatible? add in the box a Apex S14 turbo elbow £49 (Special Offers) and shipping to Spain

Thanks and good job

[bren]

I have no experience of installing an R34 GTT intercooler into an S14 so couldnt tell you if our hot and cold pipe are compatible Im afraid.

[motoraton]

Hi Brend thanks,please send me measure for the silicones and look the measure in my intercooler

[bren]

The hotpipe kit includes 1x straight 51mm internal diameter silicon connector and 1x 90 degree 51mm internal diameter silicon connector.

The cold pipe takes a 70mm internal diameter silicon pipe to run to the throttle body and a 60mm internal diameter connector to run to the intercooler.

[motoraton]

Hi bren,
the intercooler have 60mm in both,in and out,but this it´s the diference,position

http://www.skylinesaustralia.com/forums/topic/69501-r34gtt-intercooler-into-stagea/

[bren]

The link doesnt work for me.

Our pipes are steel, there is no flexibility of give in them so unless the R34 cooler is going to sit in the exact same place as the original then there isnt much chance of our pipes fitting Im afraid.

Why dont you scrap the R34 cooler and buy one of these instead? Ill do you one for £199 ;)

http://www.apexperformance.co.uk/catalog/product_info.php?cPath=120_451_121_168_169&products_id=1706&PHPSESSID=45c4ddfd869aeee6b5abe55f4d4199bc

http://www.apexperformance.co.uk/catalog/images/IMG_2913lg.jpg

[motoraton]

Hi brend,for me yes work
and yes R34 cooler is going to sit in the exact same place but the in an out pipes it´s not the same position,maybe i need one or two more pipe or silicon horse

[H8 TWD]

Dont suppose there is any chance if setting a stainless intake pipe?
Tom

[Jason@apex]

Dont suppose there is any chance if setting a stainless intake pipe?
Tom
Hi,

Yes we have these in stock and ready t go if you send me your Paypal address i can send you an invoice.
Also do you require the standard or the Z32 intake pipe kit.

Regards, Jason

[Jason@apex]

Dont suppose there is any chance if setting a stainless intake pipe?
Tom
Hi,

Yes we have these in stock and ready to go if you send me your Paypal address i can send you an invoice.
Also do you require the standard or the Z32 intake pipe kit.

Regards, Jason

[CMR]

Any chance of an standard MAF intake pipe at these prices?

[Ann]

We can do the S14 AFM to turbo intake pipe at this price, just give us a call on 01274 683633 to place your order. :)

[bahis]

Do you still have the stainless battery covers?

[bren]

Yep :)

[madmax127]

do u still have the intake pipe kit for the z32 maf at the special price

[bren]

Yes :)

[sx boy]

Hi , can i still get a z32 shiny intake pipe at the groupbuy price please / ?

matt

[StarkeyJ]

Hello can i get an intake pipe (Standard MAF) and a manifold heatshield?

[bren]

Yep, you guys can pay over the phone by credit or debit card or via Paypal. if you want to use Paypal then send me your Paypal address and ill send you the invoice :)

[bahis]

Yep :)

I'll have one then (S14 Stainless battery cover). You can send the invoice to joni@at-r.fi. And shipping will be to Finland...

[Ann]

Invoice on it's way :)

[mike_bristol83]

Are all these still available at these prices? Also do you do any shiney rad/oil caps ??

[bren]

They are still available. We dont do our own rad and oil caps and it appears that HKS have discontinued their oil filler caps. The HKS rad caps are £24.02.

[Buck]

i'am after a Z32 AFM intake pipe , are they still at these prices? also how long does delivery take?

cheers

sam

[bren]

Yeah we have them and theyre at the special prices. Theyre sent next working day.

[Buck]

ok cool can you send me a invoice through paypal for the z32 intake and i can pay tommorow morning when i've put money in my account? cheers sam

[bren]

Whats your Paypal address?

[Buck]

sambuck17@hotmail.co.uk

[Ann]

invoice on it's way now :)

[Buck]

thank you , i hate banks , take to long to process money will be in tommorow though, for payment

[Buck]

is there any chance i can change the inovice to another paypal ??

[Buck]

never mind bank finally sorted money, and paid invoice :D

[Ann]

Ok, thank you. :)

[Martin_Aldridge]

do you have any S14 Stainless Intake Pipe kit (standard AFM) at the same price?

[bren]

Yep :)

[Martin_Aldridge]

awesome :) ill take one
what's the best way for me to order it

[bren]

Just give us a ring, 01274 683633 :) Make sure you ask for the offer price! Im not in the office but whoever answers the phone will be able to help you.

[Lloydy]

S14 Stainless Intake Pipe kit (standard AFM) £54.50 (plus delivery cost if there is any)

Please send paypal invoice to lloydy_838@hotmail.com :)

Cheers

[Ann]

Invoice on it's way now. :)

[S15AK]

If the stainless steel fuse box cover fits the S15 I will take one please? (think they do fit...)

[Ann]

It will fit, how do you want to pay ?

[S15AK]

Hi Ann

sorry forgot I'd posted here, I can just paypal it over? PM the detials please.

[bren]

If you let us know your Paypal address then we will send you a Paypal invoice :)