R33 daily driver project with a twist

[T.J]

Right as everyone who knows me knows that I am the worst person ever for taking pictures and for project threads lol so here it goes I'll keep this simple.
So in Ireland car road tax is a killer it is based on cc so a 2.0l is 600 euro a year to tax and a 2.5l is over 1k afaik so I picked up a r33 but here is the twist
I bought this
http://i296.photobucket.com/albums/mm183/tweek1984/1304286732.jpg
Which used to have this
http://i296.photobucket.com/albums/mm183/tweek1984/1304286597.jpg
And this
http://i296.photobucket.com/albums/mm183/tweek1984/1304286391.jpg
But was missing something here
http://i296.photobucket.com/albums/mm183/tweek1984/1304286527.jpg
So I bought this little baby
http://i296.photobucket.com/albums/mm183/tweek1984/1304287078.jpg
But discovered this
http://i296.photobucket.com/albums/mm183/tweek1984/1304287179.jpg
The sump was much worse but I never took any pics
I had this little baby lying around waitin to be fitted gt2860r
http://i296.photobucket.com/albums/mm183/tweek1984/1304287101.jpg
It's going to sit on top of this baby
http://i296.photobucket.com/albums/mm183/tweek1984/1304286320.jpg

[colm]

i must have good timing. i was just coming on to see if youd stuck up the thread yet. Keep it up ;) subscribed.

[T.J]

Got sick of looking at this Big b**tard of a pedal
http://i296.photobucket.com/albums/mm183/tweek1984/1304287305.jpg
so I fitted one of these
http://i296.photobucket.com/albums/mm183/tweek1984/1304286404.jpg
Got sick of looking at this
http://i296.photobucket.com/albums/mm183/tweek1984/1304286184.jpg
So fitted a SR one no pics sorry

One of the best things about the car

http://i296.photobucket.com/albums/mm183/tweek1984/1304287337.jpg
And the interior is spotless nice and comfy

I will try keep Ye updated but sometimes I forget about the threads I have posted up and normally just do the job rather than go about taking a load of pics

[CillianS14a]

nice one tj, good to see this thread up! Just keep it updated now!!

[JP]

Hmmm, an SR into a Skybus - this will be interesting! :) Looking forward to more pics & updates! :thumbs:

[T.J]

Ok I have been pulling my hair out all week some lads just don't want money I reckon....I was supposed to pick up a Greddy sump and a rb25 gearbox and the lad I was supposed to be buying them off told me everyday this week to call tomorrow and he will have everything out for me but luckily I rang him everyday before I left home and found out he never got the stuff off so he told me Saturday that everything would be ready so I organised a trailer and still no parts except this time he wouldn't answer his phone so I am not a happy camper so enough of my sob story on with the project.

So I just took a pic of the old oil strainer compared to the new one I went for the improved blacktop oil strainer notice the bigger pick up opening and no dents lol
http://i296.photobucket.com/albums/mm183/tweek1984/1304881923.jpg
http://i296.photobucket.com/albums/mm183/tweek1984/1304882998.jpg
Also picked up a new oil pick up gasket from Pat Tiernan motors in Limerick ask for kierian Stack in parts he sources most of my genuine Nissan parts at good prices and great delivery times
http://i296.photobucket.com/albums/mm183/tweek1984/1304882809.jpg
Found a small difference between the two pick ups the old redtop one had a rubber ring on it all the 180sx bottom ends I have seen havent had this????
http://i296.photobucket.com/albums/mm183/tweek1984/1304882742.jpg
This is a pic of the new oil pick up flange
http://i296.photobucket.com/albums/mm183/tweek1984/1304882641.jpg
Got a new Nissan water pump aswell
http://i296.photobucket.com/albums/mm183/tweek1984/1304882874.jpg
Along with a couple of gaskets for the manifold/turbo etc
http://i296.photobucket.com/albums/mm183/tweek1984/1304882628.jpg
http://i296.photobucket.com/albums/mm183/tweek1984/1304882565.jpg
http://i296.photobucket.com/albums/mm183/tweek1984/1304882495.jpg
And a pair of locking tabs for the nuts
http://i296.photobucket.com/albums/mm183/tweek1984/1304882361.jpg

My phone decided to go dead just as I was going to take a few pics of a bumper I picked up for the car so only have one
http://i296.photobucket.com/albums/mm183/tweek1984/1304882161.jpg
Here is a sneak peak at my other little project
http://i296.photobucket.com/albums/mm183/tweek1984/1304882000.jpg

[Neelie]

ooohhhhh this should be a good one!!! :) update ta' fook! :D thread bookmarked!

[colm]

i think the oil pick ups with the O ring were in the redtop blocks and the metal gasket ones were black top blocks. the support bracket is welded onto the one with the O ring in a different place too id say?

keep it up. i really think you should concentrate on the wiring though :p

[Sideways Simon]

Missed this completely!! good work so far..... what bhp is that turbo rated to??

[CillianS14a]

Missed this completely!! good work so far..... what bhp is that turbo rated to??

Its in between a t28r and 2871r afaik, i think they go by gt28rs too

Thats a strange looking Sr you have in the last pic, you might want to get that looked at ;)

[JP]

Its in between a t28r and 2871r afaik, i think they go by gt28rs too
This. ^^^ :nod:

Rated to approx 350bhp depending on your setup - in practice you can get more out of them if you've got the cams/intake/exhaust mods to match.

[T.J]

Yep gt28rs or gt2860r or disco potato depending on who you are talking to it has a slightly smaller exhaust housing than the gt2871r from what I can gather.I think Matthew on here made 280bhp with the same turbo with a slipping clutch and a ca18det.I don't plan on using cams I had set of Tomei pon cams which I sold as I wanted to keep my fuel economy fairly good.i am hoping that the turbo will be nice and responsive and that Jp will be nice and knock about 200euro of the price of his manifold lol (you have my number)
No work done this week as I am leaving my house every morning @5.15am and dont get home until after 6pm but I hope to get cracking again next week just have to pick a brake flaring tool during the week and get cracking on removing the abs and possibly fitting a hydro depending on whether I can get It positioned nice and subtle.

[T.J]

Also forgot to add that the 4door skyline weighs in at around 1370kgs And the From what I can gather the rb25det complete with gearbox is supposed to be 90kilos heavier than the sr20det complete I guess I just have to find out when the engine is fitted and compare the weights on the nct certificates.my sil80 weighted in @1330kgs with a full tank of fuel and me in it.I am wondering what the weight distribution will be on the skyline after all the work is complete.enough waffle time for bed have to be up on a couple of hours