Cossie intercoolers

[Paul_S13]

Yay, i've been quoted £45 for a Cossie 4x4 IC, the company I spoke to reckon there good for 330bhp http://300zx.co.uk/200sx/ubb/biggrin.gif http://300zx.co.uk/200sx/ubb/biggrin.gif http://300zx.co.uk/200sx/ubb/biggrin.gif

I hope I can get it to fit http://300zx.co.uk/200sx/ubb/confused.gif

If it fits Nathans in for a surprise next time I follow him!

Richy_boy are you still interested in my old Saab IC?

[Jezz_S13]

How much for the Saab IC?

I'm interested if it's off a 2.3.

[Paul_S13]

Yep its of the 2.3 and Richy_boy emailed me a few weeks ago, but if he don't want it then I'm sure we could sort a deal out!

[Richy_Boy]

oh how imbarrasing.. I must of hit new post instead of reply.. Well yeah.. give me a price.

richard@rtbsystems.co.uk

Will u be selling the piping too? http://300zx.co.uk/200sx/ubb/smile.gif .. Pipes bound not to fit the cossie IC..

Cheers


------------------
Rich

180 to 210 BHP @???? rpm
S13 J reg Graphite Grey - ND200, Koni Adj., 17" wheelz, dropped. Broken.

[Paul_S13]

I'm going to look at a cossie IC on friday so I will let you know.

[Chimp]

ahh now i seeee!!

cossie coolers are good for that price, long and fat rectangles if i remember..

[Paul_S13]

correct young chimp! http://300zx.co.uk/200sx/ubb/biggrin.gif

------------------
Black S13
Tuned with Fords parts bin, coz its cheap! http://www.themelee.com/smilies/s/otn/violent/spectator5.gif

[SteveSadler]

comon Mannie, lets get working on that motor of yours and whack on a FMIC to match that raised boost.

u know u wanna.

I can get hold of virtually all ford parts via a contact of mine who works for a Ford Spares shop. New or used.




------------------
Bayside Blue S13.
Janspeed&D-Cat Pipe/Pace FMIC/BMC F1 Filter/Standard T25 @ 15psi
15.4 @ 98mph - North Wield Air Strip
Flywheel Figure 213bhp/209Ib ft @ 5375RPM
Power at the Wheels 166bhp
(as of 15/6/01 @ Power & Engineering)
SE Phase 2 Chip now fitted & S14 T28 awaiting fitting. :)

[Mannie]

I know, I know....

Right foot is saying go for it

Head is saying go for it

Bank account is saying no chance

6 points already on license is saying no

and not telling my insurance company about the mild mods I've already got is saying no

(I'll probably end up doing though!! Already downloaded Jez's pictures!!)

[Jez]

Do it, do it, do it!!!

[Paul_S13]

Yeah DO IT

------------------
Black S13
Tuned with Fords parts bin, coz its cheap! http://www.themelee.com/smilies/s/otn/violent/spectator5.gif

[SteveSadler]

Comon m8.

everyones proved u can get a group a pump for 80quid.
cossie coolers or saab coolers for around 50-60quid.

new EPROM

and turn dat bleed valve up to m8 16/17psi.

u know u luvvit!!

230/240bhp.

then when u get bored, do like me go buy a T28 for and bolt that on. 280bhp Skyline Power - hey presto.

Skyli

------------------
Bayside Blue S13.
Janspeed&D-Cat Pipe/Pace FMIC/BMC F1 Filter/Standard T25 @ 15psi
15.4 @ 98mph - North Wield Air Strip
Flywheel Figure 213bhp/209Ib ft @ 5375RPM
Power at the Wheels 166bhp
(as of 15/6/01 @ Power & Engineering)
SE Phase 2 Chip now fitted & S14 T28 awaiting fitting. :)

[Jeffers_S13]

Paul_S13, how much better/different is the cossie IC ? will it be fitted in the same way as the Saab one ?

[Paul_S13]

Steve Carter, Matt_S and I were looking at this on suday and we reckon the IC will bolt straight on to the bumper bar, but the pipework will be tricky.

I've heard there god for 300bhp so I will try to fit it next month(out of funds this month http://300zx.co.uk/200sx/ubb/frown.gif )

------------------
Black S13
Looking to win lottery or some C4 explosive to take care of the car.
http://www.themelee.com/smilies/s/otn/violent/spectator5.gif

I know I'm using Ford bits but don't be so damn snobby http://300zx.co.uk/200sx/ubb/biggrin.gif

[This message has been edited by paul_s13 (edited 21-08-2001).]

[Nathan_200sx]

Originally posted by paul_s13:


If it fits Nathans in for a surprise next time I follow him!

Richy_boy are you still interested in my old Saab IC?

Just cos Im not here doesnt mean you can secretley plan mods to beat me when I get back http://300zx.co.uk/200sx/ubb/mad.gif
Im looking at fitting an intercooler from a Volvo F12 truck, beat that!!! (only kidding everyone, so dont start asking me about 12" bore hoses)


------------------
Nathan
Red S13 Mongoose, K&N T3 280ish BHP
Empty bank account
My drugs have stopped working

[Paul_S13]

Yeah, well i've found a scrapyard with an old concorde in it so i'm going to get an intercooler of that http://300zx.co.uk/200sx/ubb/biggrin.gif http://300zx.co.uk/200sx/ubb/tongue.gif

------------------
Black S13
Looking to win lottery or some C4 explosive to take care of the car.
http://www.themelee.com/smilies/s/otn/violent/spectator5.gif

I know I'm using Ford bits but don't be so damn snobby http://300zx.co.uk/200sx/ubb/biggrin.gif

[kingdeacon]

i was offered a RS500 intercooler, but he wanted £250 for it! it was bloody big though, biger than the rad on the 200 by miles

------------------
King De@con
loadz of side ways
nutty driving!
S13 red

[JohnD76]

Paul,

I am getting most interrested in these cheap FMIC's... Tell me more http://300zx.co.uk/200sx/ubb/biggrin.gif Keep me posted...

I am looking at getting something beefier IC dept. No point in uprating the WMIC, go straight for the FMIC....

Paul, If you want to work on an S14a, let me know. It will give me a chance to learn some bits too and not be such a woman in the DIY mods department. http://300zx.co.uk/200sx/ubb/smile.gif



------------------
John (S14a)
Blitz Nur Spec R, SUS, MSTT, Dump Valve.
TC in box and EcoTek CB26P enroute.
Currently investigating De-Cat pipe too :)
222.8hp @ 6062 RPM
206.2lb ft @ 4755 RRM
http://mysmilies.com/s.php?archive=contrib/owen&rand=show

[Paul_S13]

John, my labour charge per hour is £75 http://300zx.co.uk/200sx/ubb/biggrin.gif and fitting the Blitz filter was a freebie http://300zx.co.uk/200sx/ubb/biggrin.gif

------------------
Black S13
Looking to win lottery or some C4 explosive to take care of the car.
http://www.themelee.com/smilies/s/otn/violent/spectator5.gif

I know I'm using Ford bits but don't be so damn snobby http://300zx.co.uk/200sx/ubb/biggrin.gif