Mapping my car.

[Phill]

Hi Jez. I spoke to you not so long ago about mapping my car. What I want to do is get everything I need before I book a date to come down to you. The car's mod's are as follows -

Walbrough pump
Dawes type device set at 14psi for the moment
Dano turbo elbow
Dano 3" down pipe
Dano 3" Decat
Bren 3" system
Blitz SUS filter
Bren's FMIC

I've also got water injection but I don't want to map it so that I have to run that all the time. I've got Nismo 550cc injectors ready to go in. I believe I need a 300ZX afm and a fuel reg. But is there anything else worth getting before I come down to you??

Cheers Jez.

[Jez]

YHM :)

[Phill]

Cheers mate.

I'm in two mind's now. On one had I could get the car re-mapped by you as it is or do I get all everything I want to do as in uprated internal's and uprated turbo etc and then get a re-map or I could do both?? :confused:

[Jez]

You could do both :)

[Phill]

I've decided i'm gonna do both cos it's gonna take ages before I go internal (although I have bought liners!!).

I've got 550cc injectors
I've got a Z32 AFM with a plug on its way.
I'm going to order a fuel pressure reg this month (can you recommend one??)

I'm now running 15psi boost but the dawes device seem's to make it peek a little to around 17/18 psi so I may try and by an Apexi SAFC first.

[Jez]

Originally posted by Phill
I'm going to order a fuel pressure reg this month (can you recommend one??)

Not really required if you're going for a re-map or SFAC :)