New guy with problems

[kerfumph]

Hi all!! 2 probs to start off with,1) had the ticking/rattle when lifting off gas at about 1500-2000rpm. Told it was big ends,stripped engine, got crank checked(ok)and put in all new bearings. THE B******* STILL DOES IT! Ideas(other than lifters)? 2)Changed to t25 hybrid at same time, I've got £750 should I a:get the ND big ic, b: get the ND wing mount ic and a KYB sus kit from se parts???Cheers all. Graham.

90's13 normal bits to 164hp @wheels + new turbo.

[SteveSadler]

personally I would buy either products from Norris Designs or SE. both charge way too much.

As for Shocks. I sourced my KYB Adjustables from the States. Set of four 399$. at the time the US exhange rate was good. Its a little crap now but check under 'HotLinks' which I'll be adding to the Web Board today.

I basically paid about 350quid for a set of adjustable shocks including delivery via fedex within 2 days.



------------------
Bayside Blue S13
Janspeed Exh
Janspeed D-Cat Pipe
SE Bleed Valve (15psi)
SE FMIC
SE Stg 1 EPROM
BMC F1 Filter
Standard T25

213bhp/209Ib ft @ 5375RPM
(as of 15/6/01 @
Power & Engineering)

[andyf]

Kerfumph, I think .. it's your tappets..
I'd say it was the crank but that's already been checked!

[kerfumph]

Ha ha very droll! Oh and I spent the £750 on something not car related at all!!