need an intercooler pipe

[boombastik]

after fitting my T28 the outlet holes are different than the T25

meaning the intercooler pipe was coming off the outlet to the intercooler at 90degrees.
but is now at 45degrees

I have bodged it with a couple differnet bits of pipe its been like this since fitting a couple months ago but would prefer a proper pipe.

so any one any ideas where i can get one ?

its a 57mm OD pipe i tried an old s14a pipe to cut and weld today but OD wasnt big enough or long enough.

[Prozac]

I think the turbo outlet of a CA T25 comes off at the right angle.

[marteh]

its just a case of turning the inlet housing is it not?

[redsx94!]

its just a case of turning the inlet housing is it not?

Nope

[Dunkz]

www.rallydesign.co.uk have a pretty big selection of pipes, should be able to get the right thing from them I think.

[redsx94!]

Put a pic up Gary and show them what you want.

But to be fair Gary there's nothing wrong with the way it's done apart from it's in two peices instead of 1

[boombastik]

Yeah I'll stick a pic up later.

It working fine as it is. But the alloy pipe has no lip to stop the hose coming off under pressure and I have noticed it's been moving after hard driving.

[Rubix_Cube]

Gary, go to any exhaust fabricator's with your "made up" pipe and ask them to make it as one piece.

[chapman-S13]

You need the t25g outlet pipe there different again to the t28 and t25

I know I had all 3 and used one of them?

[boombastik]

You need the t25g outlet pipe there different again to the t28 and t25

I know I had all 3 and used one of them?

the T25 outlet if fitted would have been pointing the wrong way :confused: