PDA

View Full Version : Can I bin this stuff???


Joe-Schmo
15-06-2010, 18:43
Passenger side strut what seems to be the standard boost solenoid and some other junk.
Going fitting an AVCR so need to know can i bin all this stuff or only some of it and do i just unclip the electrical connectors and leave em there or what.Car's a PS13

Thanks in advance,JOE:thumbs::sxoc:

Heres the pic:

http://i47.tinypic.com/rw2hxg.jpg
fordy
15-06-2010, 22:17
top and bottom ones yes, the middle one you want to keep as it's the ignition amp and the car wont run without it :)
monstamini
17-06-2010, 07:42
its a jap spec variant of the s13, with lots of 14 bits too
s13ryan
21-06-2010, 13:36
top and bottom ones yes, the middle one you want to keep as it's the ignition amp and the car wont run without it :)

would you still get a spark on the plugs if the ignition amp was unpluged?
sorry to go off the subject of this thread... just having problems starting my new engine :cry:
T.J
19-07-2010, 22:05
would you still get a spark on the plugs if the ignition amp was unpluged?
sorry to go off the subject of this thread... just having problems starting my new engine :cry:
no you wouldn't get spark
BlazeSX
23-09-2010, 20:15
can anyone tell me how the fk you unplug the harness for the solenoid?? (the vertical connecter on the left)
remo
23-09-2010, 22:27
push red tab ?
BlazeSX
24-09-2010, 00:50
nah the red tab just comes off without doing much else!?
iow200sx
17-10-2010, 20:09
:smash: