PDA

View Full Version : can this be correct


Bigtone
22-06-2003, 00:09
take a look at this pic and tell me if this can be correct
(this pic was taken on a private runway);) ;) ;)
Cookie
22-06-2003, 00:17
100KMH 2.5k rpm yes.

C.
Pauly_Boy
22-06-2003, 01:27
I very much doubt it!

You've probably got a dry solder or something! Mines read a steady 130mph when going about 60 mph, really should get it fixed!
Ant
22-06-2003, 02:27
He pressed his clutch in for a bit
Pete C
22-06-2003, 09:54
If that's 100mph, my rev counter would be showing about 4.5krpm in 5th I think.
Jezz_S13
22-06-2003, 10:03
no it's not correct, revs reading about 1/2 I'd say.

It's roughly 22mph/1000rpm, unless you have one of Gary's new fangled boxes then it'll be higher but not that much higher.
Gary@APT
22-06-2003, 10:21
looks like the adaptor for the omex to run the standard rev counter is wrong:thumbs:
Bigtone
22-06-2003, 10:53
Originally posted by gary SCA
looks like the adaptor for the omex to run the standard rev counter is wrong:thumbs:

:thumbs: :thumbs: :thumbs:
new one going in when i get it mapped
mikegsi
22-06-2003, 16:28
definately cant be right, i mean a 200sx with 3/4 of a tank of petrol?????
very rare!!!!:thumbs:
Kev
22-06-2003, 19:40
Originally posted by Pauly_Boy
I very much doubt it!

You've probably got a dry solder or something! Mines read a steady 130mph when going about 60 mph, really should get it fixed!

Id agree with this, tis wat mine did b4 i resoldered