PDA

View Full Version : SR20DET - Z32 Gearbox


cowpatmatt2
27-09-2009, 02:34
Hello,

How Much would it be for just the adapter plate and bolts to to fit the sr20 and z32 gearbox together?
It doesn't list the plate on its own on your website. Also would need the info on machining the bell housing.
I dont want any of the other bits.

Thanks
Matt:thumbs:
MazworxRacing
28-09-2009, 17:21
Hello,

How Much would it be for just the adapter plate and bolts to to fit the sr20 and z32 gearbox together?
It doesn't list the plate on its own on your website. Also would need the info on machining the bell housing.
I dont want any of the other bits.

Thanks
Matt:thumbs:

What's the postal code it will be going to?
cowpatmatt
28-09-2009, 19:42
I am in the UK. BH18 9LB
MazworxRacing
28-09-2009, 22:06
I am in the UK. BH18 9LB

545.00USD Shipped w/plate and hardware (bolts)
cowpatmatt
13-01-2010, 19:23
Is it possible to use the clutch and flywheel from a z32 tt on the sr20det engine? or is it too big?
MazworxRacing
13-01-2010, 22:39
The Z32 TT clutch is 250mm. The SR clutch is fine to use.
cowpatmatt
14-01-2010, 19:05
well its just i have a light weight flywheel and clutch kit for a z32tt. i dont have a sr20 clutch to compare so didnt know weather i could fit z32 fly and clutch onto the sr engine. would the starter motor be in the wrong place or are the bolt holes different on the crank??
MazworxRacing
14-01-2010, 20:15
Honestly not 100% sure as we havent tested this before. The splines are both the same for the clutch but its just the diameter is bigger. Cant tell you for sure if it will work or not sorry
Memphis76
14-04-2011, 09:45
could you tell me if this works with the 350 z gearboxes and if so what machine work is needed and how much ?