PDA

View Full Version : skyline rear brakes...


IrishPaddy
23-05-2009, 10:14
if i want to fit skyline 2 pots to a 180 sx (which is 4 stud) do i need to change the hub carriers? or will the 5 stud hubs bolt to the carriers that are there at the moment?

this 180 has... well had hicas(driftworks locking bar is now fitted)
marteh
23-05-2009, 14:23
all you need are these

* Z32 rear discs and calipers, including replacement hoses
* Z32/S13 parking brake components and backing plate
* R33 handbrake cables

http://www.jull.co.uk/index.php?option=com_content&view=article&id=71&Itemid=76
jhinchy
23-05-2009, 17:59
Surely s13 200sx handbrake cables would work?
marteh
23-05-2009, 20:38
not for Z32 Calipers
Marsden
23-05-2009, 20:57
not for Z32 Calipers

If the 180sx already has a internal drum setup then it doesn't mater. But if it has the handbrake on the caliper like the s14/a's then you will need the R33 handbrake cable i think
marteh
24-05-2009, 13:17
are you planning on going 5 stud along with the brake conversion?

if so then you will need R33/Z32 handbrake cables
DaveW
24-05-2009, 13:23
R33 GTS non turbo cables are required. I have a set of R32GTR Calipers, backing plates and handbrake assemblies for sale:thumbs: Also a set of 5 stud hubs with wheel bearings if needed.
IrishPaddy
24-05-2009, 19:51
dont need the stock hand brake... this is a drift car that isnt driven on the road...:nod: it has a hydrolic handbrake fitted but one of the rear calipers is siezed....

we have a r32 rear setup here.... just need to know will the 5 stud hubs bolt to the 4 stud hub carriers:thumbs:
marteh
24-05-2009, 23:28
the rears will but you will need front S14 carriers.

look in the S13 FAQ section for 5 stud conversion info
IrishPaddy
24-05-2009, 23:36
just the rears being changed for now....:thumbs: