Home Counties Local Tool List

[fordy]

Basically list any unusualish tools that you have and would be happy lending out to other members in the area :thumbs:


Ive got :-

1ton folding engine crane
engine stand
compression tester
valve spring compressor
consult tool
loads more

anything else just ask as im a mechanic by trade so got loads of spanners sockets etc :sxoc:

[TheBigShow]

can i count myself as a bit of a "tool"?

Consult cable here too

[Cluck]

I am also in possession of a serial Consult Cable (with a laptop that has a serial port :D) and Compression Tester :thumbs:

Did have a hole saw at one point (useful for FMIC hole cutting) but I'm not sure if I still have it. I will investigate and update this post if I find it :)

[Sharpy]

Another one here with consult. USB too :)

[fordy]

i got timing light aswell so if people need timing checking i's da man :cool: :wack:

[Sharpy]

I've also got a caliper rewind tool.

[yetis200sx]

i got a migwelder:)

[Jow]

We have:

2 ton engine crane
Caliper rewind tool
Engine stand
Angle grinder
Flood lights :wack:
Air compressor

And probably another 101 things but cant think at the moment




can i count myself as a bit of a "tool"?

Permission granted :p

[fordy]

incase anyone needs it.....

seems ive got the software to recode nats keys :)

[Dan@DB-Power]

does anyone have a bush press.

not a mobile one, but I have access to a 30ton press if you need help :)

Also have access to pillar drills, lathes, welders, bandsaws and sheet metal guillotines :thumbs:

[Dan@DB-Power]

Easiest way is to get 2 bits of plate with a hole in the middle, put a long bolt through the plate, bush, subframe, bush, plate and then put a nut onto the bolt and tighten :)

The force from the bolt/nut will press the bushes in :)

Dan :thumbs:

[the boi]

hi guys- i work for a recovery company and use a tilt and slide crew cab lorry, can get lowerd cars on too (and can get cars out of ditches and off the roofs ect too ;)

so if any one needs needs me pm for my number.

can also remove scrap cars & vans also if you have a log book.

weylen garden city-stevenage-luton-hitchin-baldock-biggleswade-bedford areas

:sxoc:

[mandelbug]

Engine Stand
Engine Crane (1T)
Strong Arm
Spring Compressors
Air Fed Brake Bleeder
3T Jack
Axel Stands
Ramps
Mig Welder

Plus usual socket sets and spanners

[fordy]

I now have the ability to recode s14a keys if anyone needs them coding

[fordy]

Also now have a nistune base board programmer :)

[spak0]

I have

1ton folding engine crane
engine stand
compression tester
Caliper rewind tool
Angle grinder
Mig welder
grit blaster
timing light
decibel meter
multi-meter

[aaronledwidge]

I have the following.
Engine Crane
150A Stick Welder
Clutch allignment tool
Torque Wrench
set of easy outs
set of taps
set of rounded nut/bolt removers
crimping tool
caliper rewind tool
brake pipe bending / flaring tool
multi meter
angle grinder
Various standard hand tools sockets etc.
trolley jack
4x axle stands
few other bits and bobs i cant think of.

[bluedanny]

i'm ok now lads, i have invested in a tap and die set now,

[leightaylor]

Valve spring compressor, tap and die set. can get hold of stud welder, grinder pillar drill