Request: Someone with a Greddy Auto/Turbo Timer Near Barnet

[Kyle @ H-Dev]

Right, I have a feeling mine is fooked after i did abit of welding on the car. Its very odd as it all seems to work fine, but doesnt keep the engine running after the ignition is switched off :confused:
Ive read the manual and the switch on the back was obviously still set to the correct position, which is the default "IG" rather than "ACC", tried swapping it back and forth, but nothings worked :(

Does anyone have one local to Barnet that i can plug into my harness to confirm its the timer thats dead and not something else? Everything else has worked fine since welding, so not 100% sure if its just me not able to set it up properly :wack:

Any other suggestions welcome :thumbs:

[Stuffing]

I always thought Barnet was somewhere ooop north! :wack:

You might be better off in Essex and Kent for this mate :thumbs:

[Kyle @ H-Dev]

Really? Barnet is classified as hertfordshire :confused:
Kent and essex seem miles away from me lol.

[leeham_86]

im in barnet and i got a greddy turbo timer for sale :Plug:

the plugs acctualy been cut off mine and i just spliced straight into ignition wires, its saposed to be automatic but i never set it up/ wired it up to do that, just changed the time on it :wack:

[Kyle @ H-Dev]

So sounds like mine might be buggered then. How much you looking for? What sort of condition is it in? Also, is it the same as this one (http://cgi.ebay.co.uk/TRUST-GREDDY-FULL-AUTO-TURBO-TIMER_W0QQitemZ260369953583QQcmdZViewItemQQptZUK_C arsParts_Vehicles_CarParts_SM?hash=item26036995358 3&_trksid=p3286.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318)?

[leeham_86]

30 squid..... no mines a proper old skool one in pearly white.. like i say the plugs cut off so you gotta splice it in to the ignition wires but otherwise works fine... even plays a litle tune when it turns on......... which does get annoying but you can turn it off lol.

pm me if your interested dude

[drifter x]

hi mate did you dissconnect the battery when welding as some times when you connect it back these dont wake up in time so still work i.e light up but dont do what they should dissconnect and reconect the batt after a couple of mins see if it works might need to try a few times im about 99% certain it will work as i had the same issue with my greddy one let me know how it go's:thumbs:

[Kyle @ H-Dev]

Yeah, the battery wasnt connected while i was welding (in the boot) as i was fitting the battery relocation kit. Will disconnect it today and hope it comes back to life. Cheers for the info, will let you know how i get on :thumbs:

[drifter x]

any joy?

[Kyle @ H-Dev]

No joy :( Left it disconnected for 3 weeks and nothing :( The rest of the functions work fine, so I've just left it in as it is.