*** Coming soon! ***

[Jez]

Last year H-Dev aquired the use of another workshop - its fairly large at 3000sq.ft. We've been busy setting up this workshop to house a brand new wheel alignment lift and a Pro Align ( http://www.pro-align.co.uk/ ) wheel alignment system - amoungst other things.

Progress has been a little slower than I'd have liked but we're getting there. The alignment lift is built and in place. The laser alignment system is up and running.

We're currently waiting for the electrician to wire in the lift - then we just need to level it up and we're in business.

We will be able to offer full 4-wheel laser alignment to manufacturer's spec, your spec or we can recommend a spec for your intended use. We have a lot of experience setting cars up using older technology, so this should give even better results with lower cost :)

We can also carry out corner weight measurements and adjustment (if you have height adjustable suspension fitted)

I'll post up some pics (when everything is tidied up!) and more details later on :)

[Jezz_S13]

Cool. :)

[Dave270R]

Nice one Jez :thumbs:

What sort of price for 4 wheel alignment? Mine needs doing in the very near future. I was recommended Motorworx in Marlow but may come to you instead :nod:

[Si]

Awesome, I'll be needing alignment very soon, and I'd rather give money to the 'smaller' guys :)
Any ideas on costings?
I'm looking ta the boggo camber/castor/toe on an FD3S RX7 - all suspension bits have been off of late so nothing's seized :)

[Cloudy]

Awesome news Jez:thumbs:

As others really when do you think you'll be up and running (roughly)?

I'm going to be doing a bit of work on mine soon and while its up in the air I'm replacing the old coilovers etc so will need the alignment re-doing.

[200krisx]

Cool, glad to see some businesses in the UK are doing well. I'd come and see you for the wheel alignment :) If at a resonable rate obviously ;) I Would like my coilover ride height sorted out too if possible, I'm not allowed petrol vehicles in our workshop at work so cant do it there :(

[blue boy]

Nice one, this sounds good.

[Jez]

I want to get it all going this month - as I mentioned, we're just waiting for the electrician to wire it all up.

As for pricing, it'll probably be around the £100 mark for a full 4-wheel alignment session. Corner weight measurement will be £29.99 and then adjustments will be carried out on an hourly basis at £49.99+VAT p/h. This is not set in stone, so prices may change a bit depending on how long we find it takes to do each car :)

[TheChin]

I definately need mine doing, all my wheels are nakered! I just live with the fact my car goes funky.

[Jez]

:thumbs:

[billham]

Is the new workshop near your current one Jez.

[Jez]

Yeah, its opposite :)

[Damo]

book me in jez :wack: you allready have the car anyway lol

[Dave270R]

I'll call to book in at the end of January, provided you're up and running :thumbs:

[Eddie_s13]

what he said^

[Jez]

Lift is wired in and working :)
Still a few odds and ends to sort out, but it all seems to be cool.

I'll get some more details up in the near future, should be able to take bookings in the next day or so.

[fixup1982]

Excellent i,m 1st in line as you have my special needs sx :thumbs:

[TheChin]

Sorry if i've missed another thread regarding this but...

Are you now open to re-alignment business? I need to sort out my tracking/geometary settings. It's terrible :D

[Chris B]

Yes, he's doing mine next week :D

[Jez]

Yes, all up and running :)

[TheChin]

What are the prices? I saw on a previous post you said it wasn't all set in stone.

Do i get a discount for your face when you see my terrible setup? :D

[Jez]

It's £99.99 for a 4-wheel laser alignment - assuming that it's not all seized up and we don't have to spend hours battling with things. That includes a free check up within 1 month.


Its £29.99 to measure the corner weights. Corner weight adjustments (via coilover length changes) are done on an hourly rate of £49.99+VAT p/h

[TheChin]

Fantastic, i shall be in touch shortly. :wave:

[Jez]

:thumbs: