***EVENT*** Rolling Road Day, 15th Nov, Castle Coombe PAYMENT NEEDED

[mattlake]

Right then guys, due to popular demand we are organising another rolling road day at Circuit Motors in Castle Coombe

Date now confirmed as the 15th November

Circuit Motors

Address:
UPPER CASTLE COMBE, CHIPPENHAM, WILTSHIRE, SN14 7HB

RR report:
BHPfly, BHPwheels, TorqueFly

[b]We need 10 people for this to go ahead at the following prices so payment upfront is required again to ensure this

Cost -
members - £36.40
Non-members - £41.60
Plus an extra £5.20 if you would like A/F ratio

Paypal events@sxoc.com

PLEASE REMEMBER TO INCLUDE YOU BOARDNAME AND ALSO PLEASE MAKE THE SUBJECT WEST COUNTRY RR DAY

List below (red=paid)

1.christmas (as long as ive picked up my car by then!!)
2. pdh 14a (A/F)
3. Disco-tom
4. Bristol Blue (a/f)
5. Jezz_S13
6. Japsx
7. paulpen
9. Jez
9. Gav_man7
10. N200
11. chriscooke

[jon200]

I will come if someone can check my timing before then?

[Sx_minx]

I'm sure Simon and i would most definately be up for coming just to say hello again, dont know what car it will be in tho so we wouldnt be running. :(

But another vote for the 15th is best for us too :thumbs:

[VoodooRhythm]

Voted for 15th :thumbs:
Tracey, make sure simon gets his oil prob sorted and kick him to run it then :D
I'm just praying I can get the probs sorted ready for this.

[Christmas]

can my mate in his gay MR2 come??

[mattlake]

if he signs up to the board and pays the non-member price:D

[Paulpen]

Interested in this but a few questions as will be my first run with the RB :

Does it matter how low my car is as it scrapes on alot of things as it is :(
Are they also able to check DET ? Im a bit of a worrier you see :ghey:


Cheers

Paul

[PaulShepherd]

Interested in this but a few questions as will be my first run with the RB :

Does it matter how low my car is as it scrapes on alot of things as it is :(
Are they also able to check DET ? Im a bit of a worrier you see :ghey:


Cheers

Paul

Hi Paul,

We carry out tuning on FF1600 single seaters without having to raise the ride hight of those cars, BUT, as your car is probably much more powerful then them and not as stiff on the suspention, we would have to be carefull that the exhaust or anything doesn't contact a roller during the power run... good for the cameras with loads of sparks out the back, but no good for your exhaust! Generally, if you have a couple of inches clearance, it shouldnt be a problem once your in.

Det detection. We do not generally fit our det cans on rolling road days. However, if you do want this, we can use them for your car for an extra small charge ;) If we hear anything without the det cans, we stop the run.

Hope this helps,
Paul.

[Paulpen]

Thanks for the speedy reply :thumbs:

I guess I should be ok for ride height then.

As for the DET ill leave the car in your capable hands and let you decide if its necessary etc then. I doubt I need it but im not really clued up on dynos etc :rolleyes:

ust need to know the date now and arrange work around it :cry:

[200sxs13]

can my mate becky run her mk2 vr6 golf on the rolliing road day if theres space?

[PaulShepherd]

I'm happy for any car to come along, but its upto the organisors so I'll leave it upto Steve and Matt. :)

[Madda]

can my mate becky run her mk2 vr6 golf on the rolliing road day if theres space?

From previous rolling road days I have been to it is a complete pain to swap from FWD cars to RWD cars throughout the day. But, see what the organisers have to say :) Maybe run at the end with other FWD cars that turn up?

[Bristol Blue]

can my mate becky run her mk2 vr6 golf on the rolliing road day if theres space?

At the last one we had to re-adjust for varieties in wheelbases, but as already mentioned it could be signifigant to change from measuring rear to front wheel drive.

Paul says it's not a problem. And I think you were also on about becoming a fully paid up member anyway. :wink: So should be ok:thumbs:

Though it might be worth mentioning that she should perhpas run at the end to minimize rejigging the rollers around. And there may also be an extra charge for the change over on the rollers.

[mattlake]

regarding track time, we will not be organising anything, check with the circuit to see whats available.

any car is welcome:nod:

[Bristol Blue]

Just picked up on Matt's reply to a similar question so the same ought to apply...



if he signs up to the board and pays the non-member price:D

[PaulShepherd]

At the last one we had to re-adjust for varieties in wheelbases, but as already mentioned it could be signifigant to change from measuring rear to front wheel drive.

Paul says it's not a problem. And I think you were also on about becoming a fully paid up member anyway. :wink: So should be ok:thumbs:

Though it might be worth mentioning that she should perhpas run at the end to minimize rejigging the rollers around. And there may also be an extra charge for the change over on the rollers.

Its not a problem from dynoing from rear to front wheel drive cars, its the 4WD's that can take the time, for instance, if we have skylines, Evo's and Subaru's on the same day, we like to keep one make together as they all have different wheel bases between makes. But the dyno doesn't need adjusting from front to rear wheel drive, its a true drive on and go.

As Steve says though, it would be better to do all RWD cars together and all FWD cars together and if there is any 4WD cars, then do these at the end, or at the start.. I really dont mind ;)

If the day looks busy.... ie 30 or so cars, then it's best to keep as an exclusive 200SX day, but if numbers are not so big, then I see no reason not to run other cars... as long as the organisers do not mind ofcourse. You'll need to book through Steve and Matt though :)

[Bristol Blue]

Its not a problem from dynoing from rear to front wheel drive cars, its the 4WD's that can take the time, for instance, if we have skylines, Evo's and Subaru's on the same day, we like to keep one make together as they all have different wheel bases between makes. But the dyno doesn't need adjusting from front to rear wheel drive, its a true drive on and go.

As Steve says though, it would be better to do all RWD cars together and all FWD cars together and if there is any 4WD cars, then do these at the end, or at the start.. I really dont mind ;)

If the day looks busy.... ie 30 or so cars, then it's best to keep as an exclusive 200SX day, but if numbers are not so big, then I see no reason not to run other cars... as long as the organisers do not mind ofcourse. You'll need to book through Steve and Matt though :)


Thanks Paul.

:wave:

[Chriscooke]

My clutch has just started slipping on full boost so i may just have to come along and watch now:(

[shaboy]

what is the cut of date for booking a slot/how many slots are available, need to wait till i've got some money.

[mattlake]

what is the cut of date for booking a slot/how many slots are available, need to wait till i've got some money.

There isn't really a cut of date tbh
Upto around 30 cars but we wont have that many.

No-one has put their name down yet:(

[Christmas]

1.christmas (as long as ive picked up my car by then!!)

[disco-tom]

I need to get a set of Splitfires still, but providing I do manage it, I'm in.

[mattlake]

got a taste for it now disco:wack:

[Seth]

They’ll be no stopping him now he’s popped his RR cherry :wack:

I might pop down to this one too :sxoc:

[jon200]

1.christmas (as long as ive picked up my car by then!!)
2.Jon200 (will run if i can find an RS turbo :cry:)

[pdh 14a]

1.christmas (as long as ive picked up my car by then!!)
2.Jon200
3. pdh 14a (As long as my car works by then :wack:)

[Dai]

1.christmas (as long as ive picked up my car by then!!)
2.Jon200
3. pdh 14a (As long as my car works by then :wack:)
4. Dai (as long as its the 15th or after, as i'll have mine registered by then:))

[jon200]

Take me off the list, No point me running as i need a tubby to make it run right :(

[PaulShepherd]

1. christmas (as long as ive picked up my car by then!!)
2. pdh 14a (As long as my car works by then )
3. Dai (as long as its the 15th or after, as i'll have mine registered by then)
4.

[mattlake]

1. christmas (as long as ive picked up my car by then!!)
2. pdh 14a (As long as my car works by then )
3. Dai (as long as its the 15th or after, as i'll have mine registered by then)
4.

first post is being updated as we go:D

[Bristol Blue]

1. christmas (as long as ive picked up my car by then!!)
2. pdh 14a (As long as my car works by then )
3. Dai (as long as its the 15th or after, as i'll have mine registered by then)
4. Bristol Blue

[Darkside7]

Gonna try and make this one with the new car.

[Jezz_S13]

Stick me down, please. :)

1. christmas (as long as ive picked up my car by then!!)
2. pdh 14a (As long as my car works by then )
3. Dai (as long as its the 15th or after, as i'll have mine registered by then)
4. Bristol Blue
5. Jezz

[Dai]

Two questions -

1 Does the same track noise limit apply at the rr ?

2 Is a date confirmed??

cheers:)

[jon200]

no noise limit on the rollers mate, Don't know about the date yet.

Jon

[Dai]

ok, thats good for my car !!

[jon200]

i take that yours is a bit noisy then

jon

[mattlake]

Just waiting for them to confirm the 15th is a goer:thumbs:
No noise limits:D

Come on all you people that said 15th, need 10 people for this to happen:nod:

[jon200]

i'm gonna come along but might be after 12 if you'll still be there? depends if i'm working really. Might even run but won't know till the day.

Was thinking about upping my boost to match the fuelling :wack: :D

[mattlake]

I hoping to start later than last time (will confirm later) so should be ok

[Dai]

i take that yours is a bit noisy then

jon

:nod::nod: http://uk.youtube.com/watch?v=l7w9GBq84mg

[jon200]

just the downpipe the :wack:

[Bristol Blue]

i'm gonna come along but might be after 12 if you'll still be there? depends if i'm working really. Might even run but won't know till the day.

Was thinking about upping my boost to match the fuelling :wack: :D

You got a turbo sorted then?

[jon200]

nope, might give 1.5bar a try as i'm not getting enough air in :wack: or maybe more if it don't blow up before the day :)

[PaulShepherd]

Two questions -

1 Does the same track noise limit apply at the rr ?

2 Is a date confirmed??

cheers:)

1 No noise limits :eek: for the rr.

2 The 15th November has been booked for a few days now as that looked to be the most popular choice. :nod:

Bring it on :thumbs:

[driftnut]

will there be tracktime going on or is it just going to be rolling out!!! The track would be awesome for the day, sorry if someone has already asked this

[jon200]

Don't think there is anything track orientated.

[disco-tom]

I'm in again - I've ordered the splitfires so I should be all systems go. Plus, Matt'll need a lift I expect. :wack:

[Sender]

if it is 15th so there are two possibilities:
1st. I'm gonna be there as a spectator
2nd I'm not gonna be there as a spectator cause I will be on my way back from Poland with my S15 :sxoc:

[Paulpen]

So deffo the 15th now ?

If so ill try and get a day off work :)

[pdh 14a]

My car is now running,so i should be there! :thumbs:

[Dai]

I DONT BELIEVE IT !!!

On way home with family today - wife " when shall i give our Rhys' (our son) party invites?" Me - "when is party?" wife "Nov 15th"

my brain (in homer Simpson stylee) "I'm sure you're doing something on the 15th:("

Then, 5 mins later.............................:cry::cry::cry:

So, i'm out now.... Sorry:cry:

[jon200]

My car is now running,so i should be there! :thumbs:

yay :)

[mattlake]

Hi Guys

Regarding track time:
We will not be organising anything. I have had a quick check of the events calender for the circuit and there is nothing on at all.

The date is confirmed for the 15th November:thumbs:. Will confirm time but i think 10am should be cool:nod:

Word out

[Bristol Blue]

Oh yeah, spoke to them last week and forgot to post up!:annoyed:

Castle Combe Season has now ended.

[pdh 14a]

I DONT BELIEVE IT !!!

On way home with family today - wife " when shall i give our Rhys' (our son) party invites?" Me - "when is party?" wife "Nov 15th"

my brain (in homer Simpson stylee) "I'm sure you're doing something on the 15th:("

Then, 5 mins later.............................:cry::cry::cry:

So, i'm out now.... Sorry:cry:

:( Shame,was looking forward to seeing this!
Hope the young un has a nice B'day though :thumbs:

[pdh 14a]

yay :)

Mind you,only done 4 miles testing so far :wack:

[disco-tom]

Ahh Matt - TF&TF banner for the maximum win mate. Seven Shades of Awesome™!

[mattlake]

http://i9.photobucket.com/albums/a55/minikatanarox/bump.gif

[Chriscooke]

http://i9.photobucket.com/albums/a55/minikatanarox/bump.gif

Nice smilie:thumbs: My clutch is starting to slip on boost in high gears so probably no point in going for a run on the rollers although i'll prob turn up to have a nose about:nod:

[Darkside7]

got my Rex now so will be up for this RR day.

[mattlake]

oh another 1, ill put your name down

[Paulpen]

Day off work sorted so im in :D

[Darkside7]

oh another 1, ill put your name down
ta Matt. how many people so far and what will it cost?

[mattlake]

all in the first post mate:thumbs:

[200sxs13]

ill be up for this , my engine is going back together this week

[Webbster]

im up for this :D need to check a few things first

[mattlake]

be good to see it craig:thumbs:

[odosx]

Still dont have a working 200!

[Webbster]

i no id like 2 compare it to the last time as the manifold is cracked in about 3 places:ghey: up it would be fun:thumbs: i want to see how much toms s14a has got, that things got 2 have a fair bit

[jon200]

oh bugger, My MOT runs out on the 14th so may not make it in mine:mad:

May be there in the mrs megane :ghey: raggin the t1ts off it :wack:

could put it on the rollers for a laugh.

[Christmas]

i need to get the rex mapped before i RR it...so im 50/50 at the mo!!

[Darkside7]

bump. more names guys!!! lets get atleast ten cars on the rollers!

[Chriscooke]

Tempted to put mine on:nod: Just getting opinions about my very mildly and occasionally slipping clutch:confused:

[pdh 14a]

Tempted to put mine on:nod: Just getting opinions about my very mildly and occasionally slipping clutch:confused:

Does it slip at motorway speeds or just pulling off quick?
If it never slips in 3rd 4th or 5th,i'd say it'll hold! but i'm no expert lol :wack:

[Chriscooke]

Does it slip at motorway speeds or just pulling off quick?
If it never slips in 3rd 4th or 5th,i'd say it'll hold! but i'm no expert lol :wack:

It wont slip when your going motorway speeds normally, only if your going at a steady ~70mph then you plant your foot (in 4th i think it happend) it slipped for a moment then i lifted off and then back on the throttle and it was fine. Doesn't ever slip with 10psi in 1st and second:no:

[mattlake]

come on then guys.

15 people said the 15th was good for them, only 8 have put their name down and none at all have shown the fiber of their fabric:(

[logan62]

God i would love to go on one of those rr days, but would be abit pointless as um me being a lazy sod and so aint had spare ecu socketed yet & still aint fitted boost valve cuz i am so slow i aint got round to getting boost guage [i know excuses, excuses etc], the list grows and grows & yes i know i am an unworthy sx owner - with 133k on clock maybe i should hold off until can afford reliable recon engine...................................... waffle, waffle, waffle.

[Bristol Blue]

come on then guys.

15 people said the 15th was good for them, only 8 have put their name down and none at all have shown the fiber of their fabric:(


Minus me, who didn't vote, but does have name down!!!

I'll try and get the money PayPal'd tonight:thumbs:

[mattlake]

God i would love to go on one of those rr days, but would be abit pointless as um me being a lazy sod and so aint had spare ecu socketed yet & still aint fitted boost valve cuz i am so slow i aint got round to getting boost guage [i know excuses, excuses etc], the list grows and grows & yes i know i am an unworthy sx owner - with 133k on clock maybe i should hold off until can afford reliable recon engine...................................... waffle, waffle, waffle.
http://education.smarttech.com/NR/rdonlyres/1E1398B0-C91F-49C2-B64E-D312DBB7E808/0/Punctuation1.gif
:wack:

[jon200]

lol thats funny

[Paulpen]

Tell me about it - I put the 22nd :wack:

Could i also have the a/f ratio and boost please ?

Also found out that day is the mrs birthday :eek:
















So shes coming along :D

[jon200]

she must love you then.

[VoodooRhythm]

I would put my name down, but am still unsure as to whether my car will be running, got to put it back together this weekend then should know if i've sorted the problem.
Other prob is whether I'll have the money or not, still got to tax and insure it before paying for the RR.

Fingers crossed :wack:

[gav_man_7]

come on then guys.

15 people said the 15th was good for them, only 8 have put their name down and none at all have shown the fiber of their fabric:(

Havent voted but should get my name down next week if all tests go well next week.

[jon200]

Havent voted but should get my name down next week if all tests go well next week.

all fixed now gav?

[gav_man_7]

all fixed now gav?

hopefully, fingers crossed the test goes ok!

[PaulShepherd]

Roll up, roll up :D

We have a new top 10 BHP board. Jez is on it with the 495bhp recorded, although on further analasys later on it was apparent that both runs had wheel spin :( So it will make more power than that.

Top of the board is a Skyline R34 at 562bhp, followed by 3 Invicta's, an RX7, another 200SX, plenty of Mitsubishi Evo's too. Who's going to knock the Skyline from the top of the charts? :D

[pdh 14a]

Roll up, roll up :D

We have a new top 10 BHP board. Jez is on it with the 495bhp recorded, although on further analasys later on it was apparent that both runs had wheel spin :( So it will make more power than that.

Top of the board is a Skyline R34 at 562bhp, followed by 3 Invicta's, an RX7, another 200SX, plenty of Mitsubishi Evo's too. Who's going to knock the Skyline from the top of the charts? :D

Won't be me lol,but if i'm just shy of 300 horses,please give the machine a kick or a nudge ;) :D

[disco-tom]

[massages own ego]

Am I in that top ten?

[/massages own ego]


[awaits crushed ego...]

[Jezz_S13]

I was trying to get a funky billet compressor'd GT35R for this, but it's gone a bit wrong, I ran out of time and the pound got a hammering by the dollar this week so it's on hold until the pound gets a little stronger.
That should have gone some way to threatening the Skyline.

Going to have to settle with playing with the cam timing a bit.

[disco-tom]

Bugger, I forgot about your car, Jezz... Mine won't be in the top the then. :wack:

[PaulShepherd]

[massages own ego]

Am I in that top ten?

[/massages own ego]


[awaits crushed ego...]

If your car gave over 400bhp then there is a good chance it is in the top 10 :thumbs: If it didn't make 400, then it won't be, sorry. :(

[jon200]

If your car gave over 400bhp then there is a good chance it is in the top 10 :thumbs: If it didn't make 400, then it won't be, sorry. :(

you'll get him all excited.

:D

[Bristol Blue]

Paid:thumbs:

[lum90]

I was trying to get a funky billet compressor'd GT35R for this, but it's gone a bit wrong, I ran out of time and the pound got a hammering by the dollar this week so it's on hold until the pound gets a little stronger.
That should have gone some way to threatening the Skyline.

Going to have to settle with playing with the cam timing a bit.

Phew!! looks like i may be able to hang onto my top spot for a while longer:):thumbs:

[Bristol Blue]

That was you!!:eek:

Black GTR?

[Hallsy67]

That was you!!:eek:

Black GTR?

Lol Yes, lum had a good run that day, infact all the gtrs had good runs but lums especially :D. I know il never make the top ten :nod:

[lum90]

Yeah that was mine! I think my old RX7 may be in the top 10 too:thumbs:

[Jez]

Top of the board is a Skyline R34 at 562bhp

Easy :ghey: :D
I'll come along for a re-run if its not raining :)

[Bristol Blue]

Easy :ghey: :D
I'll come along for a re-run if its not raining :)




:wack:

Hope Pauls got a better way of holding the beast down.:wack:

:whip:

[Bristol Blue]

Yeah that was mine! I think my old RX7 may be in the top 10 too:thumbs:


That must have been a while back. I remember it ran at Interpro, but didn't think it was any more than 400. What on earth was it running at Circuit Motors then?

[mattlake]

http://funbobby.myspecv.com/Bump.jpg

[Chriscooke]

Out of interest when is the closing day for payment?

[mattlake]

id like to have them in for nov 8th if poss.

[Chriscooke]

id like to have them in for nov 8th if poss.

I get paid on the 7th so will pay then as long as i don't have any more clutch issues:thumbs:

[mattlake]

cheers mate:thumbs:

now... wheres the rest of you:D

[200sxs13]

can i pay on the day ?

[mattlake]

tbh i'd prefer pre-payment as this guarantees the numbers, i need to be sure enough people are definatly going for this event to be able to go ahead.

[disco-tom]

I'll pay you on Saturday dud0r! :thumbs:

[mattlake]

I'll pay you on Saturday dud0r! :thumbs:

cool

[pdh 14a]

:wack:

Hope Pauls got a better way of holding the beast down.:wack:

:whip:

Lol,its an animal i tells ya! If i don't hit 600 bhp i'm going home :whip: :wack:
Will pay by end of week too! :thumbs:

[pdh 14a]

Easy :ghey: :D
I'll come along for a re-run if its not raining :)

Oy thats my excuse :D
But its for different reasons as i'm :ghey: and don't like getting it dirty :wack:

[Jez]

Lol,its an animal i tells ya! If i don't hit 600 bhp i'm going home :whip: :wack:LOL. Doubt it'll do 600bhp on the 15th. It will do eventually though :)

I re-mapped the Skyline that's got the current top spot on Monday - now I could have de-tuned a bit to make my life easiler, but I think he's gone away with more power :)

[pdh 14a]

LOL. Doubt it'll do 600bhp on the 15th. It will do eventually though :)

I re-mapped the Skyline that's got the current top spot on Monday - now I could have de-tuned a bit to make my life easiler, but I think he's gone away with more power :)

:eek: We'd have to have the whole club sat on it to hold it down :D

Looking forward to seeing how the stage 2 performs on mine! theres a hell of a pull mid range :nod:


On a seperate note,is the guy with the white 14.5 re-trying? (Don't know his boardname sorry :wack:)

[jon200]

Gav. Think he is yes.

[pdh 14a]

Gav. Think he is yes.

:cool: is he gavman7 ? :thumbs:

[jon200]

yup :nod:

[gav_man_7]

On a seperate note,is the guy with the white 14.5 re-trying? (Don't know his boardname sorry :wack:)

It is I :wave:

Hope to run if my m8 can get hold of a wideband. Should be running 1.2 bar as well.:thumbs:

Has anyone got a wideband i can borrow?

[VoodooRhythm]

Well things are looking up at my end, just been working on the S13 and have now got the engine running :D:notworthy:clap:
Just now need to sort the coolant lines, power line for the battery in the boot and tax/insurance :wack:

[mattlake]

good news:thumbs:

[Bristol Blue]

Well things are looking up at my end, just been working on the S13 and have now got the engine running :D:notworthy:clap:
Just now need to sort the coolant lines, power line for the battery in the boot and tax/insurance :wack:

Whoop whoop whoop!:thumbs:


:sxoc:

[mattlake]

http://i240.photobucket.com/albums/ff266/oughtumn/Bump.jpg

[Darkside7]

Bump. Where's the other 7 voters!!!! get ya names down
Payment posted today

[gav_man_7]

car is fixed! :D

Just got to fit the boost controller and then its ready for a full run!

Get my name down, Ill pay tomorrow!

[pdh 14a]

Just paid! :thumbs:
C'mon guys,hope we get the no's now :sxoc:

[Chriscooke]

I guess it would be to much work to make it so a 4wd car could go on the rollers also? A mate of mine is interested in getting his tuned gto on some at some point.

[mattlake]

As Steve says though, it would be better to do all RWD cars together and all FWD cars together and if there is any 4WD cars, then do these at the end, or at the start.. I really dont mind ;)


Straight from the horse's (well, guy who does the rolling road) mouth

[Chriscooke]

Straight from the horse's (well, guy who does the rolling road) mouth

I'll have a word with him then if their are no objections? I know it's quick but they have been told it has over 400bhp which i find hard to beleive. Could be funny seeing the look on his face if it is much lower?

Would help get the numbers up:thumbs:

[mattlake]

he is more than welcome as long as he is happy waiting till the end

[Chriscooke]

he is more than welcome as long as he is happy waiting till the end

Nice one will let him know:thumbs:

[gav_man_7]

paid :sxoc:

[pdh 14a]

:eek: Gto's are 4wd! well l never knew that :wack:

[Paulpen]

How much is it in total for a run with the extras as a member ?


RR report:
BHPfly, BHPwheels, TorqueFly [Boost, Fuel/air - Additional £5]

We need 10 people for this to go ahead at the following prices so payment upfront is required again to ensure this

Cost -
members - £36.40
Non-members - £41.60
Plus an extra £5.20 if you would like A/F ratio

One says an extra £5 and one says an extra £5.20 :confused:

[Chriscooke]

:eek: Gto's are 4wd! well l never knew that :wack:

His is and it shifts (0 - 60 sub 5 seconds) thats all i know:confused:

[mattlake]

How much is it in total for a run with the extras as a member ?



One says an extra £5 and one says an extra £5.20 :confused:

bit confusing, the £5.20 includes paypal fee:nod:

[Paulpen]

Wired you the monies :nod:

[Chriscooke]

Money sent:thumbs:

[pdh 14a]

His is and it shifts (0 - 60 sub 5 seconds) thats all i know:confused:

:cool: look forward to seeing that on the rollers! :thumbs:

[Chriscooke]

:cool: look forward to seeing that on the rollers! :thumbs:

I was as well, spoke to him on wednesday but he hasn't got back to me so my guess is he's bottled it:rolleyes: Either that or he's fibbing about the power:wack:

[pdh 14a]

I was as well, spoke to him on wednesday but he hasn't got back to me so my guess is he's bottled it:rolleyes: Either that or he's fibbing about the power:wack:

:ghey: :wack:

So i see you've paid,i take it you are running yours now then buddy? :cool: :thumbs:

[Chriscooke]

:ghey: :wack:

So i see you've paid,i take it you are running yours now then buddy? :cool: :thumbs:

Yeah going to give it a go. Still not even running stage 1 boost yet so will be a little on the weak side:( Don't want to push the standard clutch to hard.

[Darkside7]

Should be all put up a guess to what our cars will get?

RX7 Single tubby 340bhp?

[Chriscooke]

Mine should be ~220bhp tops:wack:

[pdh 14a]

290 bhp and 285 ft/lb torque! hopefully,car does now feel very pokey at stage 2,so fingers crossed :)

[pdh 14a]

Yeah going to give it a go. Still not even running stage 1 boost yet so will be a little on the weak side:( Don't want to push the standard clutch to hard.

It should be ok,depends on whether its the power or the mileage thats causing the slip! if its got meat left on it,then a gradual spool up should be ok! :thumbs:

[Chriscooke]

It should be ok,depends on whether its the power or the mileage thats causing the slip! if its got meat left on it,then a gradual spool up should be ok! :thumbs:

Could be either but i suspect power as it's only on 77k. I might fit my walbro if i'm brave enough and mbc before the 15th then and give it a proper bash:)

[VoodooRhythm]

Deffo won't be able to run mine, unless by some miricle i sell the 306 in the next week.
I just don't have enough money to tax, MOT and insure it in time.

[pdh 14a]

Could be either but i suspect power as it's only on 77k. I might fit my walbro if i'm brave enough and mbc before the 15th then and give it a proper bash:)

Yep thats low for a natural wear! go for it on the walbro,they really ain't that bad to fit! :thumbs:

[Chriscooke]

Yep thats low for a natural wear! go for it on the walbro,they really ain't that bad to fit! :thumbs:

Well i have two days off before the 15th so may give it a bash. Last time i worked on my car before a meet i broke the dam thing:wack:

[pdh 14a]

Well i have two days off before the 15th so may give it a bash. Last time i worked on my car before a meet i broke the dam thing:wack:

Its always the way! thats why i got stuck in last month :D
Shame you weren't nearer,we'd have that pump in in just over an hour :nod:

[Chriscooke]

Its always the way! thats why i got stuck in last month :D
Shame you weren't nearer,we'd have that pump in in just over an hour :nod:

Ha ha always the way. I don't actually know what my problem is, i'm not totaly incompitent when it come to working on my car it's just the messing around with the fuel that messes with my head. I could prob get it done in a couple of hours if i put my mind to it:nod: Have heard the mbc is a ten min job also:nod:

[pdh 14a]

Ha ha always the way. I don't actually know what my problem is, i'm not totaly incompitent when it come to working on my car it's just the messing around with the fuel that messes with my head. I could prob get it done in a couple of hours if i put my mind to it:nod: Have heard the mbc is a ten min job also:nod:

Yep! just empty the tank as much as possible. although i have done one with a full tank,but its not pleasent :(
And if you smoke then,ummm don't for a bit :wack:
I think theres a good guide to do this in technical,cant remember much though,fitted 3 in a month,but it was 4 years ago now! but there'll be loads of people online to help if you do get stuck! :thumbs:
p.s do you ever sleep or work lol,your on here more than me :eek: :wack:

[Chriscooke]

Yep! just empty the tank as much as possible. although i have done one with a full tank,but its not pleasent :(
And if you smoke then,ummm don't for a bit :wack:
I think theres a good guide to do this in technical,cant remember much though,fitted 3 in a month,but it was 4 years ago now! but there'll be loads of people online to help if you do get stuck! :thumbs:
p.s do you ever sleep or work lol,your on here more than me :eek: :wack:

Doh just filled up tonight:annoyed: Theirs a good guide on the jull website which i've printed off:nod: I'm on here far to much at the moment, Just split from my gf/friend and all my mates are married/ones got a baby on the way so his misses scares me with all the hormones:eek:

[pdh 14a]

Doh just filled up tonight:annoyed: Theirs a good guide on the jull website which i've printed off:nod: I'm on here far to much at the moment, Just split from my gf/friend and all my mates are married/ones got a baby on the way so his misses scares me with all the hormones:eek:

Lol at the fuel!
And soz to hear about the G/friend :(

[pdh 14a]

Do we have times for this guys??? :thumbs:

[Chriscooke]

Lol at the fuel!
And soz to hear about the G/friend :(

I'm not:no: A start time would help, not to early tho hey;)

[Darkside7]

probs 8 or 9.

[Chriscooke]

probs 8 or 9.

Sounds fair:nod: I may be late:wack:

[Bristol Blue]

Starting around 10. So not so early this time.

Though as there won't be quite so many cars running we will proably finished by 1-2 at the latest.

[Chriscooke]

10 sounds better:thumbs:

[PaulShepherd]

Wowe, been away in South Africa for the last two weeks and 9 pages of posts :eek:


10 sounds better:thumbs:

Sounds good to me :)

We'll run whenever you all like. As there is a small number turning up, it should be a good leisurely morning :thumbs:

[Bristol Blue]

Wowe, been away in South Africa for the last two weeks and 9 pages of posts :eek:



Sounds good to me :)

We'll run whenever you all like. As there is a small number turning up, it should be a good leisurely morning :thumbs:

I'm looking forward to it.

Think I have a slightly leaky turbo gasket, but only really noticable when cold. Would this be detectable? Also curious to know if my maf is maxing out? (It regularly show 5400mA which I thought was the limit).

Hope you had a good holiday:thumbs: (Or was it a busmans holiday:whip:?!)

[pdh 14a]

10 is good! still have to leave at 8ish though :cry: :)

[Darkside7]

cool. shotgun 6th

[pdh 14a]

cool. shotgun 6th

Lol,what have you done to deserve your new Name Jap? :wack:

[Darkside7]

just a pi$$ take. waiting for it to be changed to Darkside7 but everyone is having a right old laugh and won't change it for me.

[PaulShepherd]

I'm looking forward to it.

Think I have a slightly leaky turbo gasket, but only really noticable when cold. Would this be detectable? Also curious to know if my maf is maxing out? (It regularly show 5400mA which I thought was the limit).

Hope you had a good holiday:thumbs: (Or was it a busmans holiday:whip:?!)

Looking forward to it also ;)

You guys should know if the MAF is maxing here, 5400mA? I would measure the 0-5v output of the MAF, if its at 4.9... volts then its definately maxed.
The turbo gasket probably won't be noticeable if its warm, You'll probably get a ticking sound when cold though. Shouldn't effect boost pressure unless its noticable when warm.

Wasn't a holiday, I was in South Africa on the Dastek advanced Unichip coarse. I was 1 of 5 invited and 1 of 4 who actually turned up. It was great, met some nice people and learned alot, especially on diesel tuning :)

[pdh 14a]

Looking forward to it also ;)

You guys should know if the MAF is maxing here, 5400mA? I would measure the 0-5v output of the MAF, if its at 4.9... volts then its definately maxed.
The turbo gasket probably won't be noticeable if its warm, You'll probably get a ticking sound when cold though. Shouldn't effect boost pressure unless its noticable when warm.

Wasn't a holiday, I was in South Africa on the Dastek advanced Unichip coarse. I was 1 of 5 invited and 1 of 4 who actually turned up. It was great, met some nice people and learned alot, especially on diesel tuning :)

Sounds good! you want to practise on my Altea 2.0 tdi for a small price? :D

[Christmas]

Still waiting for my Power Fc to turn up!!:mad:

[mattlake]

shall i take your name of the list then chris:wack:

[Chriscooke]

Anyone know how long it takes to fit and set up an mbc? In other words if i bring it with me can someone help me sort it:rolleyes: I want to put in a respectible performance now:nod:

[PaulShepherd]

Sounds good! you want to practise on my Altea 2.0 tdi for a small price? :D

Tempting lol.... As the costs of travel and the course came out of my own pocket and my wages was stopped :( for the 2 weeks I was over there, I am nagotiating with my boss about doing any further Unichip installs :mad:. I am having a hard time of it there lately but I will let you know if it happens. The price will be competitive though :D

[StuartUK]

I wanna come along to this, although i got no major mods, i just wanna see if my car will sustain a high rev jobby and not blow up :D :D :D :D
but also, i suspect i am below the standard BHP (dont know why i think that)...
So if there is the option i can pay on the day, i would defo tag along with my fellow welsh chaps.... :)

[Christmas]

shall i take your name of the list then chris:wack:

whens the latest you need the money homeboy!?

[mattlake]

last saturday:wack:
are you likely to be ready?

[mattlake]

I wanna come along to this, although i got no major mods, i just wanna see if my car will sustain a high rev jobby and not blow up :D :D :D :D
but also, i suspect i am below the standard BHP (dont know why i think that)...
So if there is the option i can pay on the day, i would defo tag along with my fellow welsh chaps.... :)

by all means pop along. If there is space on the day (i can't see there not being tbh) then you are more than welcome.

[Christmas]

last saturday:wack:
are you likely to be ready?

well i cant run the Rx un mapped..or it will go bang...ill see if its come in the post today :)

[pdh 14a]

Tempting lol.... As the costs of travel and the course came out of my own pocket and my wages was stopped :( for the 2 weeks I was over there, I am nagotiating with my boss about doing any further Unichip installs :mad:. I am having a hard time of it there lately but I will let you know if it happens. The price will be competitive though :D

Sounds good! keep me informed :thumbs:

[pdh 14a]

Anyone know how long it takes to fit and set up an mbc? In other words if i bring it with me can someone help me sort it:rolleyes: I want to put in a respectible performance now:nod:

We should be able to pop this on between us i'd imagine :nod:
You got the fuel pump on yet? :whip: :thumbs:

[Squares]

ello ello!

Think I am going to pop down with Jez if its not pissing it down.:)

Will be nice to meet some of you guys.:thumbs:

[Paulpen]

Im not looking doubtful - finished the RB's FMIC fitting today and now have a missing powersteering belt and a nice missfire at 4.5k + :annoyed:

[Jezz_S13]

Would there be any space for a FocusRS and a Scoob?

[mattlake]

id say yes jez. 4WD will be done at the end though.

[Jezz_S13]

Yeah that's cool, cheers. :thumbs:

[Chriscooke]

We should be able to pop this on between us i'd imagine :nod:
You got the fuel pump on yet? :whip: :thumbs:

Not quite yet:o down to half a tank of fuel now so thinking about giving it a go tomorrow, still dreading it tho:wack: Got to sort my air filter out now also as that seems to be playing silly buggers:(

[gav_man_7]

what time is this starting? is anyone meeting somewhere before?

[Bristol Blue]

what time is this starting? is anyone meeting somewhere before?


Be there for 10.

I'm up for meeting up before hand. Someone else suggested it too, but can't remember who?

Jim22 will probably come for the journey. Where is convenient for you with regards to a meet point?

[gav_man_7]

Be there for 10.

I'm up for meeting up before hand. Someone else suggested it too, but can't remember who?

Jim22 will probably come for the journey. Where is convenient for you with regards to a meet point?

I dont no where others live. I live 2 mins from Aspects, what about there. I got a mate with a civic who wants to run and his mate might as well. Is that ok? He said he was happy to wait till the end and pay on the day.

[200sxs13]

i will come to this one but cant go on the rollers due to my engine not being run in, oil pump should arrive on thurs morn and mot on fri.

[Chriscooke]

ello ello!

Think I am going to pop down with Jez if its not pissing it down.:)

Will be nice to meet some of you guys.:thumbs:

You bringing your car/putting it on the rollers?

[Squares]

You bringing your car/putting it on the rollers?

Hi mate, sorry I should have said.

I won't be on the rollers as the cars only done a few miles since a rebuild.:smash:

I might drive down, or jump in with jez in his old nail as I will be driving past his door. - Although his stereo and air con are broken.:wack:

See you sat.:)

[Chriscooke]

Hi mate, sorry I should have said.

I won't be on the rollers as the cars only done a few miles since a rebuild.:smash:

I might drive down, or jump in with jez in his old nail as I will be driving past his door. - Although his stereo and air con are broken.:wack:

See you sat.:)

Go on bring it. Be nice to see more 200's there and yours sounds quite impressive:thumbs:

[Bristol Blue]

I dont no where others live. I live 2 mins from Aspects, what about there. I got a mate with a civic who wants to run and his mate might as well. Is that ok? He said he was happy to wait till the end and pay on the day.

Aspects? Is that near Longwell Vue. If we meet there you'll need to lead the way. I'm a bit hazey on the route. Used to going M4 then A 4039.

No problem with the Civic.


i will come to this one but cant go on the rollers due to my engine not being run in, oil pump should arrive on thurs morn and mot on fri.

Meh, run it in on the way up there!!:thumbs::wack:

[Squares]

Go on bring it. Be nice to see more 200's there and yours sounds quite impressive:thumbs:

Ok dude, see what I can do.:)

Its a little scruffy at the moment, but it would be good to use it - I will see if Fatboy can keep up down the M4.:wack:

[jim22]

^^^There's a possibility of two almost indentical cars then:)....Bristol Blue has a blue s14a with evo enkei's aswell!:D

[Squares]

^^^There's a possibility of two almost indentical cars then:)....Bristol Blue has a blue s14a with evo enkei's aswell!:D

:D:D Enkeis rock, but my slicks are pretty slick at the moment, so will be rolling on the R33 GTRs.:)

Car looks fairly standard, save perhaps the AP's and blue carbon bucket seat, hubba hubba.:D:D:D:D

[StuartUK]

The way i just read the above was:
Its doubtful theres room to get my S14a on the rollers, but for everyone else and non 200's, there's space ?
somthing i said guys ?

[jim22]

:D:D Enkeis rock, but my slicks are pretty slick at the moment, so will be rolling on the R33 GTRs.:)

Car looks fairly standard, save perhaps the AP's and blue carbon bucket seat, hubba hubba.:D:D:D:D

Yeah I've seen some of your track threads and your car seem's pretty serious underneath!(sleeper!):eek::D

I'm surprised so few people go for the enkei's really as track wheels as they seem to do the job well and do suit the s14a:)


Oh and please ignore the wheels on my car if you see it...they are temporary!:o


nothing like the ones in my sig pic!

[jim22]

The way i just read the above was:
Its doubtful theres room to get my S14a on the rollers, but for everyone else and non 200's, there's space ?
somthing i said guys ?

There will be room I expect mate:nod:...and 200's get priority of course!:thumbs:


I'm going just to spectate as I ran mine at the last one and haven't changed anything since:o

[200sxs13]

Meh, run it in on the way up there!!:thumbs::wack:[/QUOTE]

give me the money to fill the tank up and go for a 250 mile run and i will do :thumbs:

[mattlake]

The way i just read the above was:
Its doubtful theres room to get my S14a on the rollers, but for everyone else and non 200's, there's space ?
somthing i said guys ?

hi stu, to quote my original reply to your post

by all means pop along. If there is space on the day (i can't see there not being tbh) then you are more than welcome.
there will be space, as said previously 200 will get priority, however the maximum is about 25 cars and we are well short of that:thumbs:

[gav_man_7]

Aspects? Is that near Longwell Vue. If we meet there you'll need to lead the way. I'm a bit hazey on the route. Used to going M4 then A 4039.:



Aspects is where the monthly meet is! lol :) I got no problem with leading. Leave there at 9:30 to get to the combe by 10. Ill get there for 9:15ish.

anyone else want to meet there?

[pdh 14a]

The way i just read the above was:
Its doubtful theres room to get my S14a on the rollers, but for everyone else and non 200's, there's space ?
somthing i said guys ?

There'll be room buddy! now go and pick up your toys :D

[Paulpen]

Im not looking doubtful - finished the RB's FMIC fitting today and now have a missing powersteering belt and a nice missfire at 4.5k + :annoyed:

Following on from this :

Cleaned the afm with brake cleaner and pressurised air and refitted.

Had time to check the coil packs on cyls 1 and 2 and also checked the plugs on those cyls which I cleaned and closed the gap very slightly.

Misfire is now not as bad and when it does happen its further up the range (about 6000) and less severe.

Also making 0.2 bar more boost than before the FMIC.

Think im going to try and check the other packs and plugs tomorrow.

Any ideas would be much appreciated as if its not fixed by fri then its pointless me coming along :cry:

[Bristol Blue]

as said previously 200's (and members) will get priority

Damn straight:thumbs::smash::smash:

[Bristol Blue]

Following on from this :

Cleaned the afm with brake cleaner and pressurised air and refitted.

Had time to check the coil packs on cyls 1 and 2 and also checked the plugs on those cyls which I cleaned and closed the gap very slightly.

Misfire is now not as bad and when it does happen its further up the range (about 6000) and less severe.

Also making 0.2 bar more boost than before the FMIC.

Think im going to try and check the other packs and plugs tomorrow.

Any ideas would be much appreciated as if its not fixed by fri then its pointless me coming along :cry:

What grade of plugs are you using and what is the gap you have set?

Putting it on the rollers is an ideal way of diagnosing problems. SHould be able to tell you exactly what's wrong!

[Darkside7]

Where is everyone meeting? I know how to get to the circuit. but unsure where the RR place is.

[jon200]

when you get to the circuit coming from combe village just follow the road. The garage is on the right.

Not sure i will be there now guys, If its raining i will be there in a yellow megane but if its dry i will be welding the car for the MOT :(

[gav_man_7]

Where is everyone meeting? I know how to get to the circuit. but unsure where the RR place is.

ill be at aspects longwell green in McDonalds. leaving there at 9:30

[Darkside7]

??? I'm coming from Swindon... is there a Mc D's in Chip??

[Bristol Blue]

ill be at aspects longwell green in McDonalds. leaving there at 9:30

Sorry, meant to reply earlier, yep, see you there:thumbs:

[VoodooRhythm]

Yes there is but you'd have to go a way past the comb turing to get to it, if you're coming from swindon the nearest fast food place is BK just at the end of the dc coming down from the motorway :thumbs:

[Bristol Blue]

Where is everyone meeting? I know how to get to the circuit. but unsure where the RR place is.

It's the garage between the two entrances to Castle Combe racing circuit on the 4039.

(Think it's BOC?)

[Chriscooke]

I'm hoping to find it by driving around and looking out for other sx's:wack:

[Bristol Blue]

If you've been to Castle Combe circuit before you'll find it no problem.

I think the postcode is in the first post. Here's the map (http://www.multimap.com/maps/?qs=SN14+7HB&countryCode=GB)

[Paulpen]

What grade of plugs are you using and what is the gap you have set?

Putting it on the rollers is an ideal way of diagnosing problems. SHould be able to tell you exactly what's wrong!


The plugs that were reccomended to me for the engine. :wack:

NGK iridiums I think. Will get the number off them tomorrow. Cost enough about 4 months ago :eek:

[Chriscooke]

Can anyone tell me if their is a petrol station close to the rolling road as i may need one:o

[gav_man_7]

there is one at the rolling road but its one of those garages which is in the middle of nowhere and only has one pump. What RON do you need?

[Chriscooke]

97 upwards really, i might fill my can and use that if needs be.

[Paulpen]

The plugs that were reccomended to me for the engine. :wack:

NGK iridiums I think. Will get the number off them tomorrow. Cost enough about 4 months ago :eek:

BKR7EIX is the number on them from what I can see in the dark and rain :(

[gav_man_7]

97 upwards really, i might fill my can and use that if needs be.

If your coming from taunton then the closest Shell I know of is just off the A4174 ring road near Downend. There is a few people meeting on that ring road if you wanted pop down.

[SXRORY]

right I "should" be able to get out of work so could be on for this, maybe going on the rollers :indiff:. I take it I can pay on the day, If all is well I ll meet you there!

[Darkside7]

woohoo. one full day to go.
I might be bringing a non-member who lives near me. he has a s14 and wants it on the rollers. well, so he reakons.

[StuartUK]

:D :D: :D :D :D sometimes, i cant read right ! oops ! :D :wack:

[Bristol Blue]

right I "should" be able to get out of work so could be on for this, maybe going on the rollers :indiff:. I take it I can pay on the day, If all is well I ll meet you there!

Whoop whoop whoop!:sxoc:

Yes, you can pay on the day seeing as it's a last minute work ditch. You show that boss who's boss!:whip:

There is still 1 day left to paypal it through!! - Oh wait, no paypal account:rolleyes:

[Darkside7]

dont see why the guys at the RR wouldn't let a couple more people run, i mean its extra money for them isn't it.

[Jezz_S13]

Paid finally.

Only the guy with the Focus RS will be coming with me now, the Scoob dude can't take the pace. :D

[Bristol Blue]

97 upwards really, i might fill my can and use that if needs be.


Think they've got 99 (maybe even 100RON, but can't remember. But they definately have 'Super' grade).

[Darkside7]

who has 100!!!! I mite wack some in mine and see if I get more

[Bristol Blue]

dont see why the guys at the RR wouldn't let a couple more people run, i mean its extra money for them isn't it.

I was just joking with Rory. No problem to pay on the day. We needed minimum and maximum numbers to book the rollers, hence the list.

We need to have people paying up to prove likely attendance. We couldn't go ahead and book if everyone said 'Yeah, I'll go but pay on the day.

So it is best to pay in advance. It helps to guarentee the event can go ahead.:thumbs:


woohoo. one full day to go.
I might be bringing a non-member who lives near me. he has a s14 and wants it on the rollers. well, so he reakons.

No problem. Though non-members do have to pay the full price.

[Chriscooke]

If your coming from taunton then the closest Shell I know of is just off the A4174 ring road near Downend. There is a few people meeting on that ring road if you wanted pop down.

I need a low tank as i'm going to try and blag a hand with fitting my walbro else if it's not done by the end of sat i'm gettin a name change from chris and i'd hate to think what that would be:)

[Darkside7]

is this garage after the 1st main turning to combe? can't rem seeing a industrial estate

[Bristol Blue]

BKR7EIX is the number on them from what I can see in the dark and rain :(

They should be fine.:confused:

Running on the rollers will figure it out, though I am guessing you want it fixed so you can produce a beefy power figure.

[Bristol Blue]

I need a low tank as i'm going to try and blag a hand with fitting my walbro else if it's not done by the end of sat i'm gettin a name change from chris and i'd hate to think what that would be:)


It's the place to be for it! At the last run Jon200 changed his shocks over whilst there.

[Chriscooke]

It's the place to be for it! At the last run Jon200 changed his shocks over whilst there.

Yeah i heard someone had, thats just insane:D

[Bristol Blue]

is this garage after the 1st main turning to combe? can't rem seeing a industrial estate

Industrial Estate!!!?

If your looking at the map, switch onto 'aerial' view and you'll see it's the Combe race track!!!:thumbs:

[Bristol Blue]

Yeah i heard someone had, thats just insane:D

A whole load of other stuff got done on various cars, can't remember what though as I was trying to film and keep tabs on who ran what.

SXOC power:sxoc:



It may be worth bringing the right tools though.

[Paulpen]

They should be fine.:confused:

Running on the rollers will figure it out, though I am guessing you want it fixed so you can produce a beefy power figure.



Bit of both really lol

Id rather find out what the issue is and know my engine is running how it should with a rought figure rather than a pub figure though :)

[Chriscooke]

It may be worth bringing the right tools though.

Already thought about that, the only think i don't have is a soldering iron that would work in the middle of nowhere (only have electric):(


Bit of both really lol

Id rather find out what the issue is and know my engine is running how it should with a rought figure rather than a pub figure though :)

If your still going i might follow you up if thats ok mate?

[Paulpen]

I have no idea where im going Chris and not even planned a route yet :wack:

Hoping that Tom Tom will sort it all out for me :ghey:

[Chriscooke]

I have no idea where im going Chris and not even planned a route yet :wack:

Hoping that Tom Tom will sort it all out for me :ghey:

Ha ha thats the exact same plan i have, that and the use of old road signs/luck:wack:

[pdh 14a]

Ha ha thats the exact same plan i have, that and the use of old road signs/luck:wack:

If you find yourself on a track! your very close :nod:

[Chriscooke]

If you find yourself on a track! your very close :nod:

If i find myelf on track I'll probably stay there:D

[Paulpen]

Warmed up this morning and was missing alot and at idle too. So took all plugs out and gapped to 0.8 and seems to be better again but for how long I dont know.

Was told at work today that gappng plugs smaller can help to cover up poor coil packs so may go down that route next !

Will see how it is in the morning but hoping to come along. Dont spose someone could PM me their number so that if I cant make it I can let you guys know ?

[mattlake]

mine is in the rep contact details:thumbs:

[Paulpen]

mine is in the rep contact details:thumbs:

Wheres that ? :wack:

[mattlake]

http://www.sxoc.com/vbb/showthread.php?t=59933:rolleyes::wack:

[Paulpen]

Ahhhhhh I was looking round the main site rather than the foums :rolleyes:

[Darkside7]

heads up. I'm bringing a momo steering wheel and a Luke 3-point harness which I need to sell.