Fastest UK 200SX 1/4 mile - NOW 10's !!!

[SM]

EDIT 14th June

Tone is now in the 10's !!!!



So, you want this vid don't you?

And while your at it give Tone a big :notworthy:notworthy:thumbs::sxoc:

[Ken]

Wheres the vid then?

[800bhp]

voted, voted and voted,

I just want to see the burnout again, thats the best part :)

[ex-ctr]

i think big tone has created an amazing car and after some really bad luck in the past deserves much respect:clap::notworthy:clap:

[StokeNutter]

where is the vid and what time was posted?

[Jeremy 200]

pfff, only 11.2 seconds?! If its not 10's its not worth watching...:rolleyes:





:wack:

Looking forward to seeing the vid:thumbs:

[Mark]

Enough of the attention whoring and post the fooking vid :rolleyes:

:wack:

[fudi]

Vid Vid Vid Vid Vid Vid


come on now im getting bored !

[The_BULK]

c'mon tone you big ghey attention whoring bear post the vid up :D

Well doneon the time mate :thumbs:

[Butuz]

Post it post it post it :D

Butuz

[Sideways14a]

Where is this poxy vid, i want to see an sx kick some arse :D

[woodys13]

I see no vid yet :cry:

but i voted yes get the feker up !

[Pablo13]

Chop chop, get it up!

Congrats Tone :thumbs:

[Jezz_S13]

it's up.

http://media.sxoc.com/contributors/petrol/S13_Waxoyl_pics/Bigtone_11.2_DragRun/11.2%20drag%20run.wmv

[Ken]

it's up.

http://media.sxoc.com/contributors/petrol/S13_Waxoyl_pics/Bigtone_11.2_DragRun/11.2%20drag%20run.wmv

:notworthy:notworthy

[mav]

Thats a bit quick init?

[veef]

jesus f00king christ, nice one bigtone :notworthy:

[Wantone]

Cobra? Driver = :eek:

:D :notworthy :notworthy

[wutang200]

Fooking hell :eek:

Well done Tone :notworthy

[Sideways14a]

Lol, revs, lights go green, more revs, bit of scrabble, bit more scrabble....jeeeeeeessssssss h christ........... line.... done.

:wack:

[Jeremy 200]

cool!:D

[Fake Ben Taylor]

tone!!!:D:D:D:D:notworthy:notworthy

[Stu]

Fcuking well done!!! :notworthy :notworthy :notworthy :notworthy :notworthy

[blue boy]

Fcuking impressive, well done tone:thumbs:

[SFC]

rofl
nice 1 mate

[Tojo]

Sweet! Any vids from outside? Bet that looked amazing :)

[Polo]

What was the time? i can see vids at work:cry:
Didnt an rb30 s13 do some stonking time the other week at pod?

[Jeff]

Poo :( I only looked at this thread to see if I could ban Tone for bringing the club into disrepute by not posting the vid.

;)

Good work mate - mind blowing acheivement :thumbs:

[Jeremy 200]

What was the time? i can see vids at work:cry:
Didnt an rb30 s13 do some stonking time the other week at pod?

11.2@131! :eek::eek:


Yes, Stuee_69 did 11.5@120 last sunday. vid here: http://youtube.com/watch?v=4GntcLqLtTs

[TrIcK^]

That's faster then 11.2!!!!!!! If you could just get traction on launch, Jesus H Christ! Thats got to be a second or more wasted just at the start! :notworthy

[Smoothound]

Lol. Post It Post It !!!

EDIT : Doh, seen it. Link instead of an embed, getting to used to all the youtube lark.

[Smoothound]

Damn, that's quick !

[The_BULK]

AWSOME vid, good driving tone :D

[Scougar]

Bah... call that a launch pfff! ;)

Well done BT :)

Matthew

[Smoothound]

Bah... call that a launch pfff! ;)

Well done BT :)

Matthew

Out of interest, what was the reaction time ? :wack:

[Rob_SX]

niceeee time ! but is there a vid of the 30second quater anywhere? :wack:

[Teggers]

Nice one Tone :thumbs: Get the launches sorted just by practicing I suppose. And killing lots of tyres!

[Scougar]

I'd love to see what the car can do with launch control used. I know you probably never will tone, but just as matter of interest.

Is there some restriction to using LC in dragging?

Matthew

[The Big Yin]

awesome bigtone :D

[Mr G]

Savage :eek: Well done Tone. :thumbs:

[Bigtone]

cheers everyone...

was getting into it when the fan belt let go :( thought I could have done better.. theres always the next month..

we will be looking at launch control so with a bit of luck I might
be able to get her off the line..

also going to try some other tyres....

[Jezz_S13]

Something to fill the boost/torque void in first gear is what's needed, you could launch it at more sensible revs then meaning less wheelspin.

It's always going to be a problem launching at 6k with a long first gear, the car should be doing 40mph at 6k in first, so it's going to spin up badly; any less than that then it's going to bog down. Ballache!

Some sort of ALS (nitrous probably easiest?) to give you some sensible boost/torque at ~3-4k is needed.
Maybe compound charge it?

I'm guessing that you launch at 6k, but I expect it's somewhere around there.

[800bhp]

we will be looking at launch control so with a bit of luck I might
be able to get her off the line..

also going to try some other tyres....

why not try a bigger burn out ;)

[Butuz]

True - a nawwwws shot at lower RPM's would see that car doing silly times I recon.

Problem is - I don't think tony's :ghey: enough to use traciton control or nos :D

Butuz

[dobergoose]

A 2 step rev limiter:thumbs: Bee-r or msd, I've used both, msd cuts much smoother so builds boost quicker, doesn't help with traction but lets you see positive boost while stationary.

Oh and well done mate. Not be long til your in the tens.

[Bigtone]

T/C and naws will never ever go on my car......

we will have launch control and Im going
to try a set of these...

http://www.mickeythompsontires.com/images/products/et_street_radial_a.jpg

[Jezz_S13]

Some proper ALS then?
Grippier tyres might just bog you down more. :(

How about 4WD? :wack:

[Bigtone]

Some proper ALS then?
Grippier tyres might just bog you down more. :(

How about 4WD? :wack:

then we'll use more revs

4wd = gay

[Jezz_S13]

But more revs means more wheel spin as it'll be wanting to go 50mph instead of 0 then. :D
Need some torque lower in the revs just to get you off the line, then once you're moving you're laughing all the way to the line. :)

One of these to compliment the turbo perhaps...
http://www.joeblowracing.com/images/ProChargerHeadUnitLogo.jpg

A roots would be better, drive it straight inline off the crank bolt; but you might have to cut a slot in your rad and IC. :)

Yeah i know, that's why the :wack:

[Bigtone]

But more revs means more wheel spin as it'll be wanting to go 50mph instead of 0 then. :D


not the way ND wants to set up the launch control

[JDK]

not bad:rolleyes:
I could possibley do better in a Corsa with a Turbonator and the seats folded down..

[800bhp]

A bit of practice to get a good launch will see a 10sec run no problem :nod:

[ian_t]

Proper Job :thumbs:

:)

[Irietuning]

Nice work Big Tone

Hope you run even better with the new mods

[schumi84]

Nice to see that you gave the Cobra owner a bit of a headstart :D.

You absolutely flew there sir, very impressive.

[Kiruji]

'Kinell. :notworthy

[Sharpy]

Now that's impressive!! :notworthy

The end of the strip looks proper spine shattering as well !!

[def]

Good work tone:thumbs:

[muttley]

Nice run :thumbs:

[abz]

Impressive stuff!

Reeled that cobra in rather fast!

[OniOne]

Now that is an S13 God in action!:notworthy:notworthy:notworthy

[Damo]

i cant wait to see it go with l/c and the drag tires now :wack:

[Jules200]

Excellent result tone:thumbs:, gald too see its/your getting the results that you truly deserve:clap:

[bobbitt]

fook- what was in the cobra?

[Butuz]

fook- what was in the cobra?

A v8 of some sort but whatever it was it was down several hundred BHP :wack:

Butuz

[SM]

And Tone in now in the 10's !!!

I'm sure Vid will follow, it better !!

[FIGJAM]

Massive massive congrats to Tone, wish I was there as I should have been. Sorry to hear aout the OSG box

[Davey3legs]

This thread is useless without video. :annoyed:

Didn't realise he was running a ca?!. :eek: :notworthy

[SM]

Didn't realise he was running a ca?!. :eek: :notworthy

Your not exactly new here, how did you miss that fact :eek:

[Davey3legs]

Your not exactly new here, how did you miss that fact :eek:

I have a short attention span...thought he was running an sr or something else, didn't think a ca could be pushed that far. :wack:

[adey1984]

so did he blow the hg doing it?

[Chris]

so did he blow the hg doing it?It seems that he has :(

[Bigtone]

thanks lads..

yes we have done the H/G :annoyed:

the engine is now stripped, H/G on the way, head off to the machine shop.

but I dont care... I did a 10 :D

everything else looks ok, not a spot of dett on any piston :thumbs:

should be ready for TOTB...

[Rhys_sx]

Good one tone . Keep flying the ca flag

[Dave270R]

Have you got a vid Tone?

[clarity]

thanks lads..

yes we have done the H/G :annoyed:

the engine is now stripped, H/G on the way, head off to the machine shop.

but I dont care... I did a 10 :D

everything else looks ok, not a spot of dett on any piston :thumbs:

should be ready for TOTB...

Fair play Tone :notworthy, what HG was on it and what are replacing it with??

[800bhp]

thanks lads..

yes we have done the H/G :annoyed:

the engine is now stripped, H/G on the way, head off to the machine shop.

but I dont care... I did a 10 :D

everything else looks ok, not a spot of dett on any piston :thumbs:

should be ready for TOTB...

Glad to hear it was just the H/G :)

Awesome run and you can tell there is more to come.... next target a 9?

[Bigtone]

it was a metal H/G (was on the car before the fire)
and we'll put another one on...

sorry everyone theres no vid this time..had loads going on and forgot

[blue boy]

ARGH, no vid.

Still at top time though dude, well done:clap:

[adey1984]

any ideas on what caused it to go? shame man, but ull come back stronger yet again

[Monkfish]

any ideas on what caused it to go?

720 something bhp on a CA perchance? :wack:

Excellent job though Tone :cool:

[adey1984]

thats not a reasnable answer. hg go for a reason, having 720bhp isnt the reason for somthing going, i was actually asking a technical question

[Chris]

thats not a reasnable answer. hg go for a reason, having 720bhp isnt the reason for somthing going, i was actually asking a technical questionThat much power from a relatively small engine is a fooking miracle :clap::clap: The hg going is one of the risks you take :nod:

[disco-tom]

How about trying a solid copper headgasket with those ring stopper whatsits (no idea what the proper term is, sorry...)?

[Jezz_S13]

I would guess the cylinder pressure was greater than the clamping force excerted by the bolts therefore allowing the G to distort.

Get rid of the HG and use some of the adhesive that Ferrodo use to glue their friction material to the steel backing plates of their brake pads, and glue the head on. :wack:

[Mr G]

So looking forward to seeing this car at TOTB. :nod::sxoc:

[Damo]

i still cant get over how to boost from 4300 :eek: well done lads

[200sxslide]

10 secs :eek: mate well done wish i could of got there on the sat to see it see u at the next 1 in sept :thumbs:

[def]

it was a metal H/G (was on the car before the fire)
and we'll put another one on...

sorry everyone theres no vid this time..had loads going on and forgot


Great effort as I said at the weekend but get vids at ten of the best if possible.

Hope its back up and running soon.:thumbs:

[scottdawg]

Thats amazing! Well done for the 10s!

I'll be looking out for you @ TOTB

[Actual_Ben_Taylor]

Wow! That's fantastic, well done Tone and all involved in making it fast :)

[mohawk]

just watched vid, kin hell thats quick!!!!:eek:

[Damo]

yeah i had no idea how fast it really was untill totb man it goes well :thumbs: to big tone buffy and ND

[Digglett]

nice one big T:thumbs:

[--Olly--]

****ing heck it fast ?!!!!

[royashmr2]

Well done on the 10's. Are you out next year? Copper gaskets are an arse to seal. Once they do they can be great. What events are you going to be doing?

[JAF EVANS]

:clap::clap::clap::clap:

[Ronsta]

Awesome time and a great vid, I just went to the s13 section of the main site and did looked at his tec spec am I right in thinking he had his mods done by knight industries?

[SM]

Norris Designs mainly.

[dobergoose]

am I right in thinking he had his mods done by knight industries?
Your thinking of KITT or knight rider:wack:

[Ronsta]

dobergoose yes I was going down that path....

bigtones specs (http://www.sxoc.com/site/rides/ride.php?Member_ID=466)

SM I have scoured the Norris Designs website and I am having some difficulty finding any of his listed mods.

[Jezz_S13]

Most of the mods are one offs, or nothing to do with Norris.
However Norris has done all of the tuning and the original build.

Buffy, and dare I say it, Tone do most of the work now.
Though I've just got off the phone to Tone and it's off down there soon for a few bits to be sorted for the new season.
New drive shafts have arrived so he might get off the line this year. :D

[SM]

Its not an off the shelf package ;)

What exactly are you looking for? Why not take a look at his project thread...

http://www.sxoc.com/vbb/showthread.php?t=269850

[800bhp]

Or you can read about it in Januarys issue of Japanese Performance :thumbs:

http://i282.photobucket.com/albums/kk252/800BHP/JapPerformance.jpg

[Ronsta]

Sorry people I was talking about this link bigtones specs (http://www.sxoc.com/site/rides/ride.php?Member_ID=466) that leads to this :p


Tech Spec:

* spec..
*
* ATX SURVEILLANCE EQUIPMENT AUTO CRUISE
* AUDIO PLAYBACK
* AUTO CRUISE
* AUTO DOOR LEFT
* AUTO ROOF LEFT & RIGHT
* COMPUTER INTERFACE
* CHEMICAL ANALYZER
* CHEMICAL DETECTORS
* DMV CHECK
* EJECT LEFT
* ELECTRICAL GENERATING MODE
* GRAPPLING HOOK
* HEMOMETER
* HIGH-TENSILE REFLECTORS
* HOMING DEVICE
* IMAGE DATABANK
* INFRARED TRACKING SCOPE
* LINEAR PREDICTIVE GRAPHICS ROUTINE
* MAP READOUT
* MICRO JAM
* MICROLOCK
* MEDICAL SCAN / VITAL SIGNS SCANNER
* PASSIVE LASER RESTRAINT SYSTEM
* PHOTO SCAN
* POLICE FREQUENCY
* POLYPHONIC SYNTHESIZER
* PRIVATE CARRIER FREQUENCY
* PURSUIT MODE
* RADAR
* REMOTE MONITORS
* SELF-ANALYZING PROBE
* SELF-DIAGNOSTIC ROUTINE
* SKI MODE
* SURVEILLANCE MODE
* THERMO-DYNAMIC SYSTEM
* TREAD PATTERN SCAN
* TRUNK LID
* TRAFFIC CONTROL SYSTEM
* TURBO BOOST
* VOICE PROJECTION
* VOLTAGE INDUCTION COIL
* WINCH
* 3-D INTERACTIVE GRAPHICS PLOTTER

which I am sure is cult reference to the 80s knightrider, just passing comment on how Norris Designs don't stock a pursuit mode.

but thanks to the link to the show thread its an amazing car.

[Jezz_S13]

LOL, never seen that before. :D

[dobergoose]

LOL, never seen that before. :D

:o I hadn't either, makes my kitt comment seem a bit daft, I thought knight industries was a tuner I just hadn't heard of:rolleyes:

[Sideways14a]

Lol i aint seen that either, quality :D

[Jeremy 200]

Or you can read about it in Januarys issue of Japanese Performance :thumbs:

http://i282.photobucket.com/albums/kk252/800BHP/JapPerformance.jpg

Has anyone scanned it? Missed this issue.

[Buffy]

Buffy, and dare I say it, Tone do most of the work now.


He's been chopping bits of it unsupervised of late :eek:

[Jim]

Oh lordy, are you sure its a good idea to let him do that :D

[def]

I can just see it now "But Mike It dont neeed a Roof I dont mind gettin wet":D

[TIM200]

respect to bigtone!!

[moe_s14a]

The cars an animal!! Good run mate. Hope to see the times get faster!

All the best

[selsey-spud]

that is sick!