S15 Chassis bracing and rear subframe

[Evilchap]

I am looking for the chassis bracing from an S15 to stiffen up my S14a. Have you got any of them?

[David Reid]

Hello

Yes we should have all of them PM me and let me know which ones you need

[Evilchap]

Thanks for getting back to me :)

I will drop you a PM, but due to a bit of a boat catastrophe, it wont be for a few weeks now :(

Ben

[David Reid]

OK just for reference the subframes are the same s14 to s15 the only difference is stonger bottom arms and the bolt on bracing

[Evilchap]

So the bolt on bracing could be taken from an S15 chassis in theory, and the bottom arms could be taken from one also, or replaced with aftermarket versions?

Sorry to take up your time, I appreciate you're busy chaps :)

[Matt_S]

So the bolt on bracing could be taken from an S15 chassis in theory, and the bottom arms could be taken from one also, or replaced with aftermarket versions?

Sorry to take up your time, I appreciate you're busy chaps :)

I was gonna post earlier, but didnt want to do Dave out of a sale! ;)
The rear 'cups' for the subframe mount washers ont he S14 are replaced by a bar with the cups on the ends on the S15 ;)

ANd the S15 lower arms haev some extra webbing in them over the S14 arms. THats it.

[David Reid]

There are also some strengthening plates in the boot and under the carpet by the rear seat, all could be swapped over into an s14

[Matt_S]

TBH Dave, the only ones Im not 100% sure on wether they will go or not are the Roof/ B and C pillar supports thingies. But I think they could be tweaked to fit - especially the B pillar ;)

[Evilchap]

Do these braces all bolt into the 14a, or will holes need to be drilled?