*special Offer* Gt2871r - £675 Gt28r - £475

[TurboDynamics]

With the help of Garrett we have managed to secure you guys another limited run special offer!!!

GT2871R with actuator - £675 inc VAT (Can be supplied with either 0.64 or 0.86 t/hsg)

GT28R with actuator - £475 inc VAT

Carriage will be next day via TNT at a cost of £14.50 inc VAT

We can also supply fitting kits for £19.95 inc VAT

As an added bonus to S13 owners, if required, we can supply an inlet adaptor to convert from the S14 style fitment to a hose for £35.00 inc VAT if ordered at the same time as the turbo.


Same rules as last time, we need payment in full no deposits or part payments. The 17% forum discount does not apply to these special offers.


Matt

[OniOne]

:clap: Thanks for putting this offer up again guys! Just in time as well.:thumbs:

[TurboDynamics]

:clap: Thanks for putting this offer up again guys! Just in time as well.:thumbs:

Thanks for the order!!!

Matt

[Irishpaddy]

for the 71r... what housing would you recomend? i'm looking for torque...

what price would the shipping to dublin ROI be?

Are the oil ways/water ways in the same place as my t28... I.E will my braided hoses fit straight on?

[lsd]

What type of actuators come with these and what psi are set at as stock?

Are they capable of holding 1.2bar/1.4bar and holding boost during high revs?

Would there be any chance of spiking also with this actuator?

Thanks.

[TurboDynamics]

What type of actuators come with these and what psi are set at as stock?

Are they capable of holding 1.2bar/1.4bar and holding boost during high revs?

Would there be any chance of spiking also with this actuator?

Thanks.

Both units come with standard S14 actuators.

Matt

[TurboDynamics]

for the 71r... what housing would you recomend? i'm looking for torque...

what price would the shipping to dublin ROI be?

Are the oil ways/water ways in the same place as my t28... I.E will my braided hoses fit straight on?

I'd recommend a 0.64 t/hsg. All the fittings are the same bar the oil drain flange which might well need a hole enlarging on the flange.

I'm working out carriage and will let you know shortly...

Matt

[Irishpaddy]

if yopu could post up a phone number to ring in my order aswell... i cant seem to find one in your section:thumbs:

[dreamdim]

Great! can you post a pic gasket for turbo to exhaust and price please? What sort of warranty does it come with?

Thanks

[TurboDynamics]

if yopu could post up a phone number to ring in my order aswell... i cant seem to find one in your section:thumbs:

01202 487497

[TurboDynamics]

Great! can you post a pic gasket for turbo to exhaust and price please? What sort of warranty does it come with?

Thanks

The turbo downpipe gasket comes as part of a fitting kit, £19.95 inc VAT.

The turbos come with a 12000 mile/12 month warranty. This covers the worksmanship of the turbocharger and not damage caused by any outside influences, lack of oil, dirty oil etc.

Matt

[Spesh]

What compressor housing do these come with?

[Irishpaddy]

ordered this morning.... was there any problems with the card?

[TurboDynamics]

What compressor housing do these come with?

S14 style 0.60 A/R compressor cover.

Matt

[OniOne]

Just received the turbo kit. Thanks!:thumbs:

[TurboDynamics]

Just received the turbo kit. Thanks!:thumbs:

No problems, apologies for the delay.

Matt

[micraplay]

re 2871 : is there a choice of housings on these? its for an sr20 and looking for around 350bhp but dont wanna blow too much spool up or lag time!! like plenty of torque.

any recommendations? thanks

[TurboDynamics]

re 2871 : is there a choice of housings on these? its for an sr20 and looking for around 350bhp but dont wanna blow too much spool up or lag time!! like plenty of torque.

any recommendations? thanks

0.64 t/hsg would be the best choice.

Matt

[Spesh]

S14 style 0.60 A/R compressor cover.

Matt

I've got the 28RS with the larger intake on it, would the compressor housing be interchangeable? Would save me having to remake pipework etc :D

Thanks

Mark

[TurboDynamics]

I've got the 28RS with the larger intake on it, would the compressor housing be interchangeable? Would save me having to remake pipework etc :D

Thanks

Mark

The RS has a 60mm compressor wheel so the cover wouldn't fit the 2871R I'm afraid. It could be profiled to fit the new turbo though...

Matt

[JockeW]

You dont have the gt28r inlet as this:
http://www.turbobygarrett.com/turbobygarrett/catelog/Turbochargers/GT28/GT2871R_472560_15.htm

Or is it with 3" inlet?

[micraplay]

0.64 t/hsg would be the best choice.

Matt

ok thanks, are these units direct bolt on with t28/25 style flanges and 5 bolt outlet on exhaust? (ie bolt up to my existing intake and exhaust parts?)

[Irishpaddy]

ok thanks, are these units direct bolt on with t28/25 style flanges and 5 bolt outlet on exhaust? (ie bolt up to my existing intake and exhaust parts?)

yeah they are... they just need the oil drained machined a small bit..

i wonder could you let us know what exactly needs to be machined and in what way... pictures would be nice:wack:


got mine yesterday:D

http://images36.fotki.com/v1161/photos/2/267052/958417/DSC00065-vi.jpg
http://images33.fotki.com/v1135/photos/2/267052/958417/DSC00066-vi.jpg


thanks guys!:thumbs:

[dreamdim]

how much for fitting kit + p&P? does 17% discount apply to fitting kit price? is it ok to pay by paypal?

[TurboDynamics]

You dont have the gt28r inlet as this:
http://www.turbobygarrett.com/turbobygarrett/catelog/Turbochargers/GT28/GT2871R_472560_15.htm

Or is it with 3" inlet?

It's the 28R inlet on these turbos...

Matt

[TurboDynamics]

how much for fitting kit + p&P? does 17% discount apply to fitting kit price? is it ok to pay by paypal?

Fitting Kit - £19.95
P&P - £5.00

17% discount does not apply to these offers, we are not set up with paypal so card over the phone is easiest way.

Matt

[MarcRRN]

what sort of power can i expect with the 28R???

[JockeW]

what sort of power can i expect with the 28R???

320bhp max

[micraplay]

how much is delivery? are they in stock?

[TurboDynamics]

how much is delivery? are they in stock?

Delivery is £14.50. Turbos are in stock ready to go.

Matt

[neire]

Is the gt28r an exact replacement for the standard tubby? ie intake etc..
Does it need to be machined? If so what exactly needs to be done?

edit: are the fitting kits nissan or spurious?

[geogge]

what's the .86 and .64 2871 rated for?

[TurboDynamics]

Is the gt28r an exact replacement for the standard tubby? ie intake etc..
Does it need to be machined? If so what exactly needs to be done?

edit: are the fitting kits nissan or spurious?

It is a direct replacement bar having to elongate one of the oil drain flange holes.

The fitting kits are not genuine Nissan.

Matt

[TurboDynamics]

what's the .86 and .64 2871 rated for?

Between 350 - 380 bhp, maybe a bit more with the 0.86.

Matt

[JP]

what price would the shipping to dublin ROI be?
As per the above. :nod:

Also, can you supply the GT2871R (0.64) with a HKS or similar adjustable actuator or does it matter if I don't want any actuator at all?

Thanks. :)

[TurboDynamics]

As per the above. :nod:

Also, can you supply the GT2871R (0.64) with a HKS or similar adjustable actuator or does it matter if I don't want any actuator at all?

Thanks. :)

Carriage would be £35.00 + vat.

We don't stock HKS product, I can supply an uprated fixed pressure actuator if required (at extra cost). There is no price difference if we supply with or without the standard actuator.

Matt

[JP]

Cheers for that Matt! :thumbs: Do you stock the slieve-type compressor housing ones as well?

[Joematose]

Hey .....


I'm looking for the fitting kit....

what studs and nuts does it come with?

Is it just the oned for turbo to turbo elbow or does it come with those for manifold to turbo aswell ??


:thumbs:

[TurboDynamics]

Cheers for that Matt! :thumbs: Do you stock the slieve-type compressor housing ones as well?

We do however it's not on special offer at the moment I'm afraid

Matt

[TurboDynamics]

Hey .....


I'm looking for the fitting kit....

what studs and nuts does it come with?

Is it just the oned for turbo to turbo elbow or does it come with those for manifold to turbo aswell ??


:thumbs:

It comes with studs and nuts for turbine housing to elbow. We could supply manifold to turbo studs at extra cost however you'd need to let us know what size you require.

Matt

[Joematose]

Thanks :thumbs:

Just ordered a fitting kit there over the phone :nod:

[JP]

We do however it's not on special offer at the moment I'm afraid

Matt
Not to worry Matt, thanks anyway! :thumbs:

[Datsun-Des]

Are the GT28R's still avaialable, do you take Paypal?

[Datsun-Des]

Don't worry, just read the rest of the thread :cry:

[ajbh]

I m running stage 2 at the moment with a badley rebuilt t28 thats only holding 13.5psi when it should be doing 16. I can t see the point of getting the 28r because my aim is to get 350 + eventually. Can i run a 71r on stage 2 with 16-17psi as a temporary measure until i decide to run more power??

[TurboDynamics]

I m running stage 2 at the moment with a badley rebuilt t28 thats only holding 13.5psi when it should be doing 16. I can t see the point of getting the 28r because my aim is to get 350 + eventually. Can i run a 71r on stage 2 with 16-17psi as a temporary measure until i decide to run more power??

Yes you can however a GT2871R will flow more air at 16psi than a GT28R at 16psi so you'll need to make sure the rest of the cars spec is ok. You'd probably be better off running less boost on the GT2871R as a temporary measure.

Matt

[TrIcK^]

Possibly after a T28r, but if i wanted a staggered oil seal fitted, what would be the additional cost? :)

[TurboDynamics]

Possibly after a T28r, but if i wanted a staggered oil seal fitted, what would be the additional cost? :)

We could do the turbo with a staggered turbine end ring for £499.

Matt

[TrIcK^]

We could do the turbo with a staggered turbine end ring for £499.

Matt

I shall be in contact soon :thumbs:

[TurboDynamics]

This special offer will be ending at 17.00 today but fear not because we are currently exploring the possibilities of other special offers...keep your eyes peeled!!

Matt

[adzn2k]

bummer what i guess i'll just have to get my t28 rebuilt till you have another offer on :thumbs: