View Full Version : On holiday and too much rain =
I got bored and decided too make a start on my car early this year.
So here's the plan. Sort out rust in engine bay first.
Firsly strip out as much of the ancilaries as I could without removing the engine ,
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/FRONT1.jpg
then.
Removed all the seam sealer first and found ALOT of rust underneath it. So cleaned it up using DEOX GEL , took several aplications.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/RUST2.jpg
And then its time to spray some high zinc primer on it.
will be watchin this what ya got planned
Sort out all the rust first...
Then do a full color change
And finally fit a bigger turbo + inlet plenum.
Should keep me busy over the winter..
lol yeah i should think so. you goin for colour you was talkin bout when i see you?
Was there any evidence of rust behind the seam sealer before you started? More pics of the effected areas would be useful :) Keep up the good work :thumbs:
There was a fair bit of surface rust under the seam sealer alot more than I expected, but nothing had rotted through.
Sorry but all primed now so I cant get anymore pics :(
All the rust done now and a couple of coats pf zinc primer. plus welded in new metal around battery tray as quite bad there.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/prim3.jpg
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/prim1.jpg
Well apart from a little blowing in required on the front corner, it has come out well.. I have decided to go for a pure white.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/ENGINEPAINT1.jpg
See how easy it will be too keep it clean :D
shit you done that fast looks good how you get rite down back of the engine? whole car that colour now?
If you remove as much as possible of the pipes / wires etc you can get around the engine quite well,
Only the engine bay done atm
Next interior..
really does look a good finish. jus aerosols?
If you remove as much as possible of the pipes / wires etc you can get around the engine quite well,
Only the engine bay done atm
Next interior..Gained my respect :thumbs::notworthy ALMOST on the level of pedantic petrol pete :thumbs:
stueywalls1
14-12-2007, 21:25
keep up the great work I will be watching and trying to pick up some tips along the way.
No I used 2K pure white. You get alot better finish that way and the paint is harder than celulose..
Top job :notworthy:notworthy:notworthy
Some more progress, intercooler fitted and radiator + sprayed up front bumper support bracket..
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/intercooler.jpg
very clean, i do like nice clean white engine bays.
Wow, you must have one of the lowest post-per-day rates ever :eek: lol
Lovely bit of work it has to be said :thumbs:
Started on the rear today and decided to remove the seam sealer to check for corrosion after what I found in the engine bay, found several small patches and a couple right at the rear that had split apart at the seam.
So out came the Deox gel again..
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/100_1063.jpg
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/100_1066.jpg
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/100_1067.jpg
very nice. Like the look of that engine bay, I wouldn't mind doing the same on mine. Top job:thumbs:
Looking good :thumbs: Keep up the good work and keep us updated.
yeah it looks really good and really clean
Was there any sign of rust behind the seam sealer in the boot before you stripped it? Keep up the good work :thumbs:
Was there any sign of rust behind the seam sealer in the boot before you stripped it? Keep up the good work :thumbs:
Unfortunatly no, there was no signs of rust anywere. the seam sealer was put on quite thick in the boot. So there's a small amount of weight saving after removing all that.
had the rear windows removed today , cleaned of all the sealant and checked for corosion, all OK..
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/WINDOWOUT1.jpg
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/WINDOWOUT.jpg
Fitted one of the rear chargespeed wings today.
I dont like the way it flares out 50mm at the top and then goes down to nothing at the bottom.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/sidewing2.jpg
So I have been toying with the idear of stretching the bottom out to suit the top approx 50mm.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/sidewing1.jpg
What do you think.
Ps.. Bucket seat option in orange..
teh200sx
14-01-2008, 16:08
How much will you need to space the wheel out to get it look right? And how does it look with the door shut?
How much will you need to space the wheel out to get it look right? And how does it look with the door shut?
I have got some 10J rims to go on the rear and they will need a 20mm spacer to bring them to just inside the top of the arch.
When the door is shut it will just look as flared out at the bottom as the top. hopefully :thumbs:
teh200sx
14-01-2008, 16:49
Sounds good to me then :thumbs:
Finished cleaning up the inside today and sprayed it up.. Now I have got too remember were everyting went :smash:
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/inside13.jpg
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/inside11.jpg
:clap:looking good mate are you spraying the whole car white or just the inside? keep up the good work and pics!!:thumbs:
The whole car is going to be done in white. Once i have bonded the rear quarters on.
Loving the white, would defo paint mine white if I did a colour change/shell build.:)
I'm really liking the rear arches, do you have any more pics. The car will look very nice in white. Are you putting a kit on it, if so which one. Keep up the good work, looking forward to more and more updates. :thumbs:
I'm really liking the rear arches, do you have any more pics. The car will look very nice in white. Are you putting a kit on it, if so which one. Keep up the good work, looking forward to more and more updates. :thumbs:
The rear arches are chargespeed, which i am going to flare at the bottom. I am going too fit the original side skirts back on with a little modification, I want it too look original'ish.
Is this the first time you've done this sort of thing?
I've got no indication of rust anywhere on mine, but i'm tempted to strip it down and see what's hiding underneath then giving it a good coating.
Should look really good in white, keep up the good work :nod:
first dibs on buying this car if it comes up for sale lol!!!!!! lookin very nice
thats looking nice. love white. top work
Is this the first time you've done this sort of thing?
I've got no indication of rust anywhere on mine, but i'm tempted to strip it down and see what's hiding underneath then giving it a good coating.
Should look really good in white, keep up the good work :nod:
No its not the first time I have done this, but it was a few years ago.
I fitted an X pack kit to my 1975 Capri 3.0 GT. It was white aswell !!
Maybe im thinking of the good old days
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/100_1075.jpg
not a good pic but you get the idea..
As with the rust under the sealer you may be lucky and not find any but you cant tell untill it is removed..
A bit more progress made.
Thanks to Petrol :sxoc: All the engine bay brackets are now plated..
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/engineplating.jpg
Also the rear quarters are now on and nearly ready for paint.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/bonding20.jpg
As you can see I have flared them out at the bottom by 40mm to give it a 'fat' look
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/bonding21.jpg
Also I have started on the front bumper by filling in the indicators and opening up the front by 40mm to allow for more cooling.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/frontbumper.jpg
what wheels are you putting on it m8
Looking good. :thumbs:
Quick question; Apart from sealing the Seams :wack: what is the point of seam sealer? Will you be replacing it all afterwards?
nitrodave
08-03-2008, 19:03
cool project! looking to do similar to my s13 on the engine bay and strip/paint the interior
looking forward to see more!
Looking good. :thumbs:
Quick question; Apart from sealing the Seams :wack: what is the point of seam sealer? Will you be replacing it all afterwards?
Seam sealer stops the water from seaping in to the joints.. I have replaced what i have removed but I have tried to do it a bit neater than nissan did:smash:
Awesome work, you do bodywork for a living?
Will be interesting to see what that front bumper looks like :nod:
That looks mint mate, what wheels are you going for?
what wheels are you putting on it m8
They are 8j front and 10j rear deep dish hockenheim style wheels. No pics yet.
Awesome work, you do bodywork for a living?
Will be interesting to see what that front bumper looks like :nod:
Thanks m8, I dont do body work for a living, just picked stuff up after messing about with cars over the last 20 years.
Started priming her up today, a couple off layers off primer filler and then a bit of flatening to finish..
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/primer2.jpg
Thats going to look awsome :thumbs:
Nice progress :nod: can't wait to see what it looks like when it's finished!
W hat have you used to fix the rear quaters on mate, Is it 'Sikaflex' ?
Looks like its gonna be awesome mate, great work :notworthy
iRONDONKEY
17-03-2008, 21:27
lookin good man. nice build. i wish i had your knowledge.
Top job this :thumbs: Thread needs more pics though ;)
Yeah I agree with Pete this thread needs a lot more pics, although the progress is really looking good mate. Looking forward to seeing that modded front bumper!
W hat have you used to fix the rear quaters on mate, Is it 'Sikaflex' ?
Looks like its gonna be awesome mate, great work :notworthy
Yes I have used silkaflex and about 50 self tappers.
Top job this :thumbs: Thread needs more pics though ;)
I will have to charge up the old camera then !
Looking forward to seeing that modded front bumper!
Got to mod the rear bumper aswell !! Was hopeing to have her on the road in April not looking like it now :no:
McRearout
18-03-2008, 13:19
The rear 1/4's look mean :cool:
crazyshad1
27-03-2008, 15:02
nice project
Managed to get some paint on it today, 2 coats worth.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/1coat2.jpg
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/1coat1.jpg
Just need to flat it back and then 2 more coats will do.
Finally starting to make some real progress...
That looks real nice as always. BTW I take it you are doing it in your home garage, how are you dealing with the fumes, and what sort of compressor are you using for the spraying.:thumbs:
cant wait to see the end result
Yes I have used silkaflex and about 50 self tappers.
When you used the self tappers, did you remove them after the silkaflex had set and fill the remaining holes?
or have you ground them flat?
That looks real nice as always. BTW I take it you are doing it in your home garage, how are you dealing with the fumes, and what sort of compressor are you using for the spraying.:thumbs:
cant wait to see the end result
i am using a 100 litre compressor and some specialist vapor masks for the fumes...
When you used the self tappers, did you remove them after the silkaflex had set and fill the remaining holes?
or have you ground them flat?
I used countersunk self tappers so i could leave them in position and fill over the top..
Some more progress,
Whilst waiting for the paint to harden off I decided to fit the new turbo, Gt3076. After having it powdercoated..
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/newturbo.jpg
Also I have started on the rear bumper, have removed the fog light and smoothed in the number plate surround,
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/rearbumper1.jpg
Here's the final pic off where I am up to at the moment, just started flattening the paint with 1500 wet and dry.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/frontwings.jpg
gonzomagic
11-04-2008, 19:36
Lovely:thumbs:
Davey3legs
11-04-2008, 19:41
Loving the blended rear plate surround, if i ever made a custom bumper for myself, it'd have the fog light and reflector flush aswell, hate the black surround, makes the bumper look :hurl:
Looking good :thumbs: After you have flatted it back I would leave it a couple days. The paint will still be soft and flatting it back allows it to dry quicker - but you probably already knew that :)
Looking good :thumbs: After you have flatted it back I would leave it a couple days. The paint will still be soft and flatting it back allows it to dry quicker - but you probably already knew that :)
Thanks for that :thumbs:
That is awesome. Might I suggest a nice addon, it's expensive but I think it would look just right in your bay:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=110237574592&ssPageName=STRK:MEWA:IT&ih=001
They also make an SS washer tank, but the "aussie" one is also nice (and cheaper).
Looks good, but I like to be able to see the fluid level without taking the lid off, way to lazy for that.
Some more pics off the front and rear bumpers nearing completion..
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/rearandfrontbump.jpg
and a pic off the modified side skirts 'kicked' out at the ends to acomidate the modified wings and rear quarters.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/modsideskirts.jpg
Started test fitting rear splitter from SRB. Had to cut it in to three sections due to the flaring out off the rear quarters. Starting to whish i had not flared them out and just bonded them straight on, as I would have had this finished long ago. But its done now.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/srbsplitter.jpg
Looking good mate! I'd like to see how your rear bumper turns out I'v never seen one done like that before, and I have to say the engine bay looks spanking! Hope mine will look as good one day lol!
Here's a pic off the rear end nearing completion, well chuffed with the rear bumper. Rear splitter needs a bit of adjusting but its finally getting somewhere.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/rearedit.jpg
Davey3legs
29-04-2008, 20:32
Now /\ /\ /\ thats what the standard 14a bumper should have looked like from the factory. :nod: :nod: :nod: :nod:
edit: - - - :smitten:
hi was that sprayed in your garage? if so what things did you doo spray it in there? also did you do it allm in one go?
Hi m8 , as you can see from the white floor it was all sprayed in the garage. I was hopeing to have it on the road early april gut due to the fact I have had too strip it down so far and spray everything seperatly, it has taken so much longer. Still should be done end off May.
That is really nice, top job. Have you done the front bumper, am looking forward to seeing it on the car. I like the idea of taking the indicators out. Top job keep it up
Nice one Chris! been waiting to see that bumper sprayed up and its stunning! :nod:
car looks awsome in the flesh too, should look sweet with those wheels on her ;)
good luck on the assembly.... hope you got a good memory :wack:
Dan
That does look fantastic mate, you have done really well there.
Loving the whole look, cannot wait to see it out in the sunlight and finished!
Keep it up.:thumbs:
Thanks for that, I cant wait to get it finished aswell.
As I thought that rear bumper looks really nice! Good job!
look spot on . how the hell did you spray in there . must have nearly died from the fumes
look spot on . how the hell did you spray in there . must have nearly died from the fumes
I bet your feet were sticking to the floor with all the tacky overspray :D Have to say you are doing a fantastic job of this :notworthy
look spot on . how the hell did you spray in there . must have nearly died from the fumes
I sprayed a bit at a time and used a proper vapor mask, feel OK at the moment!!
I bet your feet were sticking to the floor with all the tacky overspray :D Have to say you are doing a fantastic job of this :notworthy
The floor did get quite tacky, going to have to repaint that once its all finished.
This is coming along nicely mate,youve certainly put some work in!!:thumbs:
dan mkii
19-05-2008, 21:28
looks great mate, how did you do the back bumper did you leave the whole surround on like the number plate and the fog light surround bit ?
Davey3legs
19-05-2008, 21:47
looks great mate, how did you do the back bumper did you leave the whole surround on like the number plate and the fog light surround bit ?
I was just about to ask a similar question, is the number plate surround custom or a modified original??, would love to see a couple of close up pics if thats ok?.
I want to make up something custom to replace the standard surround, the bumper needs spraying and i hate that big lump of plastic on the back. :whip:
dan mkii
19-05-2008, 21:51
great minds ahh? lol
This is how I did the rear bumper.
Remove numberplate surround
You then have to cut down the surround to fit snugly inside the bumper, you have to cut off the fog light parts. Then cut about 10mm all the way round out off the bumper if memory serves me wright.
I got some 4mm abs plastic and cut it out to fit where the fog light holes are.
Then using some abs plastic as backing strips screw this to the inside off the bumper and the plastic filling peices and surround. Also bonded in place using seam sealer.
This holds all the parts flush.
Then with a sanding wheel rough all surfaces and fill with flexible filler.
Then it should look something like this
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/rearbumper1.jpg
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/rearedit.jpg
This has to be one of the best S14 arse ends ive seen :thumbs:
:smitten::smitten::smitten:
Awesome job mate!
Davey3legs
20-05-2008, 20:01
/\ /\ /\agreed, looks much 'cleaner' and deeper as it should, the standard looks too narrow and fussy with the plastic surround.
I could off started a new trend !!
Looks awesome! What are gonna do for a fog light?
Looks awesome! What are gonna do for a fog light?
I am going to change the right hand reversing light in to one.
Some more progress.
Front bumper finished and fitted.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/newfront.jpg
Also fitted underdrive front pulley and mocal oil cooler.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/oilcooler.jpg
looks absolutely gorgeous! More shots of the front!
I think this looks awsome, cant wait to see it when its finished :notworthy
I have a spare front bumper, you dont fancy doing the same with mine at a cost do ya? :)
I think this looks awsome, cant wait to see it when its finished :notworthy
I have a spare front bumper, you dont fancy doing the same with mine at a cost do ya? :)
I was thinking off having molds made off both front and rear bumpers later this year and then selling them if there is interest.
looks absolutely gorgeous! More shots of the front!
Thanks , I will get some more shots when i wheel here out, on axle stands at present.:(
Finally got her of axle stands today so here are some more pics as requested.
first some front snaps.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/front22.jpg
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/front21.jpg
and finally a pic off the rear alloys so you can see the dish..
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/rearwheel1.jpg
front with light off.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/front20.jpg
Chriscooke
15-06-2008, 17:07
Thats looking perfect:D
Woooow :smitten::smitten: Gorgeous, thats now my most favourite 14a on here
Thanks for that, cant wait to get the brakes finished and get her on the road..
dan mkii
15-06-2008, 17:42
that looks fantastic mate, you must be pleased with how it comeout?
Dave270R
15-06-2008, 17:51
That work you've done with the bumpers is awesome :thumbs: :smitten:
I have an underdrive crank pulley but haven't fitted it yet. Do you need different belts? :confused:
That work you've done with the bumpers is awesome :thumbs: :smitten:
I have an underdrive crank pulley but haven't fitted it yet. Do you need different belts? :confused:
Yes you will need a shorter alternator belt and a longer power steering belt. Sorting it this week so will let you know the sizes..
Looks awesome :notworthy You must be well pleased :thumbs:
That really is amazing, its just looks so right. One of my fav looking S14a around at the moment. Get it all sorted and take some really nice pics of it.
200krisx
15-06-2008, 22:48
I've got to agree that it's one of the best looking I've seen. Well done on all your work!
nice job ;) looks very cool btw
It looks gorgeous, but where are your indicators and side repeaters now then???
Dave270R
16-06-2008, 18:52
Yes you will need a shorter alternator belt and a longer power steering belt. Sorting it this week so will let you know the sizes..
Nice one mate :thumbs:
It looks gorgeous, but where are your indicators and side repeaters now then???
The indicators are where the side lights were. I have replaced the side lights with a ultra bright LED's in the main beam reflectors.
The side repeaters I am not to sure about, would like too leave them out but not to sure on the legalities off doing so. Can anyone help on that.
dan mkii
16-06-2008, 20:17
what about putting 3mm leds in the wing mirrors?
oh what white did you use?
what about putting 3mm leds in the wing mirrors?
oh what white did you use?
I think any lights you use have to be approved but I may be wrong.
The paint is an Acrylic 2K pure white.
How have I missed this?! Your car is awesome!
schumi84
18-06-2008, 19:13
After seeing the rear end i thought 'wow', but then looking at the front with it being opened up and the black diffuser, it is even better.
Absolute sex on wheels :) :thumbs:
That work you've done with the bumpers is awesome :thumbs: :smitten:
I have an underdrive crank pulley but haven't fitted it yet. Do you need different belts? :confused:
The belts required to fit this pulley are..
Alternator 4PK890
Power steering 3PK890
hope this helps..
How have I missed this?! Your car is awesome!
Thanks for the comments everyone. :thumbs:
Whats an underdrive crank pulley?
[QUOTE=nismo;4057629]Finally got her of axle stands today so here are some more pics as requested.
first some front snaps.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/front22.jpg
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/front21.jpg
:eek::clap::clap::clap:awsome mate:sxoc:
i must admit i had BIG dowts about the standard skirts but u sort that a it just works
top build
Whats an underdrive crank pulley?
An underdrive crank pulley is a pulley that is smaller than the standard pulley in diameter.
It runs the ancillaries ( alternator ) slower so they take less power from the engine. In theory..
:eek::clap::clap::clap:awsome mate:sxoc:
i must admit i had BIG dowts about the standard skirts but u sort that a it just works
top build[/QUOTE]
I did not want to change the overall look off the car too much,
alanjuggler
20-06-2008, 11:10
is the crank pulley on the SR20 not a harmonic dampener then?
is the crank pulley on the SR20 not a harmonic dampener then?
It is, yes.:nod:
S13_dr1fter
20-06-2008, 11:17
that looks gorgeous mate i love white cars :thumbs: awsume :D
by the looks if your thread title you have been on holiday for a very long time, LOL! Very nice again
Christmas
20-06-2008, 16:02
jealous...me.....uhhh YEAH!!
that looks amazing mate!!:thumbs:
is the crank pulley on the SR20 not a harmonic dampener then?
There's lots off different views on this if you do a search..
I am going to try it and see what happens.
Wanted this finished off in April however due to a few issues its overun slightly..
Should be on the road next month.
Here's a few more pics too bring the thread up to date..
Rear complete.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/Copyofreardone1.jpg
Engine complete and running.
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/enginedone2.jpg
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/enginedone1.jpg
Just a few jobs to finish off inside and thats it.
that is amazing cant believe how much it has changed since i last sore it
Chriscooke
28-07-2008, 20:46
If i could sum that car up in one word it wolud be "Stunning" :smitten: I'd be to scared to drive it:(
Nice work mate!:)
Watch that DV though if you are running any kind of man boost.:thumbs:
BLAKTOOTH
28-07-2008, 21:58
Fcuking good effort there mate. If that looks as clean/good in the metal as it does in the pic's you could start your own business doing this, where do I sign up :thumbs:
Thanks for the comments
If i could sum that car up in one word it wolud be "Stunning" :smitten: I'd be to scared to drive it:(
Yes I was going too track day her , but after all the hours off work I dont really know if i want to now.
May look for a cheaper car to track instead.
waaooooo that is nice ...dunno about the front spoiler but the car and the work u have done is amazing ,really well done mate
cheers
rab
Chriscooke
29-07-2008, 20:59
Thanks for the comments
Yes I was going too track day her , but after all the hours off work I dont really know if i want to now.
May look for a cheaper car to track instead.
Get yorself another cheap 14a and use that one for best:D
just taken a look at this thread very very impressive work done here im starting my project soon i hope its as successful as yours some gd custom work done there mate beautiful
cant wait to see pics when its on the road
ross:thumbs:
As requested just a few more pics to finish some interior and one after a clean..
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/100_1158.jpg
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/100_1157.jpg
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/100_1155.jpg
http://i136.photobucket.com/albums/q168/nismo9/200SX%202007-8/100_1164.jpg
Stunning :notworthy :thumbs: Top job, You must be proud of her :nod:
Yes I was going too track day her , but after all the hours off work I dont really know if i want to now.
May look for a cheaper car to track instead.
:ghey:
Spank it! Show it some use!
I think being on a track is safter than the road to be honest :wack:
Stunning car mate :cool:
Stunning :notworthy :thumbs: Top job, You must be proud of her :nod:Now that is praise indeed :nod:
Stunning :notworthy :thumbs: Top job, You must be proud of her :nod:
Thanks Petrol and everyone else for the comments :thumbs:
Yes I am proud of her , and glad to finally be able to drive her.
WOW !!!
Looks really nice and clean look. AWSOME S14A !!!
Top job mate ;)
nice :cool:
One of my favourite S14's on here :)
dan mkii
05-10-2008, 13:01
looks fantastic chris, i love the inside, i think the centers off the wheel would look beter black in my opinion thoe. oh thanks for the inlet plenum looks great!!:thumbs:
looks fantastic chris, i love the inside, i think the centers off the wheel would look beter black in my opinion thoe. oh thanks for the inlet plenum looks great!!:thumbs:
Glad you like it, One thing do not use any alloy polishing products on it as it will ruin the clear powdercoat.
Just use soap and water..
Powered by vBulletin® Version 4.1.9 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.