PDA

View Full Version : Water Temperature Hose adaptor



Wookie
26-10-2007, 14:32
Hi Dan,

Can you get or do you have anything like this for a SR20 DET, they are 34mm in diameter. It's for a jap gauge sender so I think it's NPT fitting?

Looking for either blue or polished silver:thumbs:

http://www.sxoc.com/vbb/attachment.php?attachmentid=49982&stc=1&d=1193405452

blue boy
26-10-2007, 15:55
I had to get mine in red from eghey as the 34mm seem to come in red. Would be interesting if Dan can get them in blue at that size though.

Dan@DB-Power
29-10-2007, 09:59
Hi Guys

Not something I do yet, but I could offer an easier solution? What i did on my Sr was to drill a hole and tap it on the water outlet on turbo side of the engine :)

Dan :thumbs:

Rich_M
31-10-2007, 16:48
drilling and tapping is frightning stuff when you mechanical skill can be summed up with nuts and bolts and oil changes.
I would also be interested in economy sender housings.