Radiators with Fans, Fan switches and cowling *ENDED*

[Dan@DB-Power]

Hi Guys

Seeing as the last group buy Rads (here (http://www.sxoc.co.uk/vbb/showthread.php?t=268381)) for £90 were so successful I have decided to do another one, we need a minimum 30 orders though. I know we had a slight fitment problem with the S13 ones so and I am now getting these new ones adjusted to suit :)

The prices for the 52mm ones will again be £90.

This time I will be adding a few extras :nod:

These will be:-

1:- Adding silicon hoses for £25 (only available in blue)

2:- There will also be the option of having 2x large 12" cooling fans with an amazing 1400CFM each with fixing and fitting kits (inc thermostatic fan switch built into the rad) for an extra £60, or you can add an adjustable one which fits into the hoses for an extra £20 making it £80 with an adjustable fan kit.

3:- Also for just an extra £30 on top of that you can even have a special aluminium cowling made similar to the one Polo made here:-
http://www.sxoc.com/vbb/attachment.php?attachmentid=49280&stc=1&d=1190637074
http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=49280&stc=1&d=1190637074

So let’s re-cap that, it's a 52mm thick radiator, hoses, fans & fixtures with non-adjustable fan switch and cowling for just £205 for the complete kit.

If that's not good enough; if we manage to hit 50 or more orders then I will honour the whole lot for just £195

So the options are as follows:-

Option 1 Radiator on its own. £90
Option 2 Radiator + Silicon Hoses £115
Option 3 Radiator + Silicon Hoses + Fans and fitting kit and all wiring switches etc £175
Option 4 Radiator + Fans and fitting kit £150 (no hoses)
Option 5 Radiator + Silicon Hoses + Fans and fitting kit + Cowling £205 or £195 with 50 or more peeps

If you already own one of my existing rads then these 2 options may be to your liking:-

Option 6 which will be the fans, fixing kit, inline hose temp controller for £80 or
Option 7 which is the same as 6 but with the cowling for £110 :)
Option 8 which is the same as 7 but with the Hoses for £125 :)[/B]

Postage will be £12.50 for just the rad with hoses, or £15 with the rad hoses and fan kits/cowling etc :)

List below the Username, Car type, Option number eg:-

1:- Dan@DBpower, S13 (CA18DET), Option 5

If you wish to participate in this group buy I will require a £20 deposit (non-refundable, unless we don't hit numbers) which can be paid for here:- Radiator Groupbuy (http://www.db-power.co.uk/index.php?cPath=390&)

The group buy will end at the end of October so be quick :) and rads will be ordered at the same time as the group buy closes. Delivery should be 2 months :)

Many Thanks
Dan :thumbs:

1:-shaun_s13, s13 (ca18det) and option 1 (dep) (paid)*
2:-R22Helipilot, S13 (ca18det) Option 4.5 Radiator + Fans and fitting kit + Cowling (dep) (paid)
3:-FlikstRR, S14 (SR20DET), Option 2 (Dep) (£115)
4:-Monkey Boy, S14 (SR20DET), Option 1 (paid) (£90)*
5:-Shifty biscuits, S13 (CA18DET), Option 1 (paid)*
6:- Damo S13, S13 (SR20DET), Option 5 (Dep) (£205/£195)
7:- 30psi, Bluebire (CA18DET), Option 6 (Dep) (paid)*
8:- Razzario, S13 (CA18DET), Option 1 (Paid in Full) (£90) *
9:- Muttly, S14a (SR20DET), Option 7 (Deposit paid) + extra Rad
10:- Airbog, S13 CA18DET Option 7 (paid)
11:- Dukey, S13 CA18DET Option 5 (dep) (Paid)
12:- Super_woody, s14a (sr20det) Option 5 (paid)

14:- micraplay, s13 (SR20DET), Option 5 (with adjustable fan switch too) (PAID)
15:- develop, s13 (CA18DET), Option 3 (Paid in full)*
16:- Goingsideways, s13 (CA18DET), Option 2 (paid) (£115)*
17:- Nick_RX7, s14 (SR20DET), Option 1 (paid) (£90)*
18:- Pablo S13, s13 (CA18DET) Option 4 (Paid)
19:- Bean Bandit, s13 (SR20DET) Option 2 (paid) (£115)

21:- Bean Bandit S14 (SR20DET) Option 2 (dep) (paid)
22:- Rogthedodge S13 (CA18DET) Option 5 (paid)
23:- Jankes S14a (SR20DET) Option 1&7 (paid) (£200)
24:- Pablo13 S13 (CA18DET) Option 4 (dep) (£150)
25:- Andy F S13 (CA18DET) Option 5 (dep) (Paid)

[shaun_s13]

i will have one dan

[30PSI]

I'm just after the £90 fan kit Dan :)

[shifty biscuits]

i will take a rad at that price.

[shaun_s13]

shaun_s13, s13 (ca18det) and option 1

[Dan@DB-Power]

I'm just after the £90 fan kit Dan :)

no worries :) Call it option 6 :wack:

I'll be keeping tag on the numbers in the original thread, but if you don't pay your deposit you won't get added ;)

Dan :thumbs:

[shifty biscuits]

shifty biscuits, s13, option 1
i will go pay the deposit now.

[shaun_s13]

deposit is payed through paypal under emma bennett

[Monkey Boy]

Option 1 Please :thumbs:

[Paulpen]

A few questions if I may

Basically im after a rad for my RB25 swap and was looking at standard R32 ones so was wondering what size these are in comparison ?

Also are the leccy fans suckers or blowers ? ;)

Ta :)

[blue boy]

Hi Dan

Will there be any chance to jump in on some of the prices on say the fans and the cowling, i already have the rad from the last GB. The standard cowling on my car just does not give the look at the moment;)

[Dan@DB-Power]

A few questions if I may

Basically im after a rad for my RB25 swap and was looking at standard R32 ones so was wondering what size these are in comparison ?

Also are the leccy fans suckers or blowers ? ;)

Ta :)

Hi Mate

The rads are of similar size but will be thicker :)

As for the fans both, it just depends on which way round you put the terminals :)

Dan :thumbs:

[Dan@DB-Power]

Hi Dan

Will there be any chance to jump in on some of the prices on say the fans and the cowling, i already have the rad from the last GB. The standard cowling on my car just does not give the look at the moment;)

Hi Blue Boy

Updated, see option 6 & 7 :wack:

Dan :thumbs:

[sgt_raffie]

Hi Dan. Any chance for just hoses and fans+cowling?? Got controller already.

[blue boy]

Option 7 then please Dan.

When do you need deposit and what kind of delivery times am i looking at as don't need the rad?

In St Lucia at the moment but will be back next week.

[Rich_M]

Is it just me or is anyone else unable to see the picture of Polo's cowling?
Rich

[driftnut]

^^^Me neither^^^

Im interested in this group buy but not sure what option to go for yet. Any thoughts?

[R22helipilot]

Deposit from R22Helipilot, Option 4.5 Radiator + Fans and fitting kit + Cowling £190 for S13 CA18det

Paid £20 deposit via Paypal for the above.

You need to sort out the website Dan, don't want everybody to see my address.

[paullen]

Have you got a pic of it all fitted to a car? I'm very interested! Would it all be here by 10th Nov?

[Paulpen]

Thats cool

Any idea of how much thinker as space is gonna be tight :(


Hi Mate

The rads are of similar size but will be thicker :)

As for the fans both, it just depends on which way round you put the terminals :)

Dan :thumbs:

[Daniel san]

Just a quick note - got an S14 one off Dan in the last GB, was for the S13 with SR20 but ended up on a mate's S14 and was a perfect fit :)

[FlikstRR]

FlikstRR, S14 (SR20DET), Option 2

deposit payed by Flikstrr - flikblade(at)gmail(dot)com



also when i used the link to pay... i was on r22helipilots account???? it stores all his details so i coulda charged it to his account! :s wanna sort that matey!

[Damo]

Option 5 please :)

[Dan@DB-Power]

Back up an running again guys :)

Dan :thumbs:

[slider200]

interested in option 6/7 depending on pics as can't see them!

[Dan@DB-Power]

Can you see the picture now guys :)

Dan :thumbs:

[dukey]

cant see pics still..

very interested though!!!!

hows about full payment as i dont like doing deposits then i know its all paid for!??

[Dan@DB-Power]

Picture:-
http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=49331&stc=1&d=1190735743

Dan :thumbs:

[Damo]

That looks mint mate im now after number 5 please :) for sr in s13

damo

[Airbog]

Dan, what is that cowling?
And what's the shipping price to Lithuania for option 6 or 7?

Thanks.

[Muttly]

Sweet. I'll take an option 7 please Dan for S14a.

I've a few calls to make and I may take a few rads while I'm at it. I'll let you know.

[Razzario]

Deposit paid, Razzario, S13 CA18DET, Option one... thank god you've done another GB Dan

[Dan@DB-Power]

International shipping on a rad + cowling or just rad/cowling etc should be £28

Dan :thumbs:

[Muttly]

Any idea on delivery time Dan? ie when will you get them?

[Dan@DB-Power]

"tread carefully mode on"

Rads/fans
I would say 6-8 weeks from the group buy end

Cowlings
I would say about 3 weeks from the group buy end :)

but seeing as Winter is coming up I can't see it being a problem with timescales :)

[Muttly]

Damn "tread carefully mode" is still switched on. Quick Dan turn it off or everything will go wrong. Haha.

Thats grand. I'm just after texting a few lads so we'll see what they say/ Might be able to take a few bits off you. Hopefully anyway.

[Dan@DB-Power]

Hi Muttly

Yeah just let me know :)

Dan :thumbs:

[andypat]

Hi Dan just wondering if you would do the adj thermostat and hoses as I got the rad and leccy fans already

andy
P.S for S13 ca18det

[Dan@DB-Power]

Hi Andy

I can get an adjustable one and the hoses. Price would be £65 :)

Dan :thumbs:

[andypat]

Okay dan will get in touch when I get back from france if you have them in stock might get you to send them with the rad if that,s ok

[Dan@DB-Power]

Okay dan will get in touch when I get back from france if you have them in stock might get you to send them with the rad if that,s ok

Hoses will be coming in with the rads, so won't arrive until 2 months after the GB :(

Dan :thumbs:

[sgt_raffie]

sgt_raffie, sr20det, option 8 (blue hoses), deposit paid

[Damo]

deposit sent mate :thumbs:

[Airbog]

Hi Dan - I think I'll take option 7. Deposit will be sent this week.

[30PSI]

Cheers Dan, just sent £20 deposit for the:

Option 6 which will be the fans, fixing kit, inline hose temp controller for £80

[Muttly]

Dan, I'm just trying to pay you the deposit for my stuff there now, however its asking for £23 because I'm in Ireland. I don't mind paying that bit extra but I just said I'd let you know before I go ahead with it so you know there's extra coming or you can change the setting on the shop to remove it, or whatever you think yourself. Just let me know, once you do I'll pay it in right away.

[Dan@DB-Power]

Dan, I'm just trying to pay you the deposit for my stuff there now, however its asking for £23 because I'm in Ireland. I don't mind paying that bit extra but I just said I'd let you know before I go ahead with it so you know there's extra coming or you can change the setting on the shop to remove it, or whatever you think yourself. Just let me know, once you do I'll pay it in right away.

Hi Muttly

Weird as the GB option on the website has no weight associated with it :wack:

Just use paypal to:- dans14a@hotmail.co.uk

Dan :thumbs:

[Muttly]

Hi Muttly

Weird as the GB option on the website has no weight associated with it :wack:

Just use paypal to:- dans14a@hotmail.co.uk

Dan :thumbs:No bother, I've it just sent there now.

Muttly, S14a (SR20DET), Option 7

[gonzomagic]

So tempted by the Rad.

:cry: I need to save money,:cry:

[Hallsy]

Dan, that picture you posted shows rad, fans & cowling right?

If you don't have the cowling do the fans just bolt straight onto rad?

[Dan@DB-Power]

Dan, that picture you posted shows rad, fans & cowling right?

If you don't have the cowling do the fans just bolt straight onto rad?

Yep the fans come with a universal fitting kit which goes between the fins of the rad and gets secured at the other side of the rad :)

The cowling would just increase performance and the look :D

Dan :thumbs:

[30PSI]

The 2 pics of the setup don't come up for me?

[Dan@DB-Power]

The 2 pics of the setup don't come up for me?

Same pic as what's in post 28 :)

The problem is some people log onto the SXOC using .com or .co.uk or even the IP address. In order to see the pics you need to be logged into both and have your login cached i.e. Always logged in :(

Dan :thumbs:

[30PSI]

Cheers dan. Does the cowling make the fans sit any closer to the engine?

EDIT - Ok being thick now, I have a Koyo rad, so those cowlings may not even fit :wack:

[Dan@DB-Power]

Cheers dan. Does the cowling make the fans sit any closer to the engine?

EDIT - Ok being thick now, I have a Koyo rad, so those cowlings may not even fit :wack:

Yep about 25mm nearer :)

You can alway's make something fit :)

Dan :thumbs:

[30PSI]

Ok I'll have to see what its like without the cowling first. Currently my single fan is nearly touching the bottom pulley

[Airbog]

When it will be possible to get option 7?

[Hallsy]

CHeers Dan, in fairness though I can't see that cowling being much more advantageous than having the fans straight onto rad, but obviously it looks nicer :)

[Dan@DB-Power]

Hi Airbog

Will be about 3 months give or take :)

Dan :thumbs:

[30PSI]

CHeers Dan, in fairness though I can't see that cowling being much more advantageous than having the fans straight onto rad, but obviously it looks nicer :)

The cowling will help pull air through parts of the rad that aren't covered by the fan.

[dukey]

S13 (CA18DET) option 5 with adjustable inline thermostat. Deposit paid in the name of Miss E Lazarus. Could you please inform me of when you need payment of remaining balance as its not my account.

cheers Chris

[brad]

does option 5 come with the temp controller

[dukey]

option 5 comes with a non adjustable controller in the rad or an option of an inline adjustable controler for an extra 20 notes i think.....read back through the first post and it says about it there!

chris

[brad]

option 5 comes with a non adjustable controller in the rad or an option of an inline adjustable controler for an extra 20 notes i think.....read back through the first post and it says about it there!

chris

thanks mate ive read it over and over again and thats what i thought .
theres to many options. lol

[blue boy]

Dan, can you confirm that the inline temp controller that goes in between the bottom rad hose is adjustable and if so what make?

cheers

[Dan@DB-Power]

Hi Guys

Options 3-5 come with a non adjustable sender built into the rad or for £20 you can have an adjustable one :)

Options 6-8 come with an adjustable inline one :)

Hope that clarifies things :)

Dan :thumbs:

[brad]

Thanks Mate

[Airbog]

Dan, can I send deposit just by paypal, because I couldn't proceed on your website (bacause of address - in Lithuania)?
If it's OK - just post your paypal address for me.

[Razzario]

Hi Muttly

Weird as the GB option on the website has no weight associated with it :wack:

Just use paypal to:- dans14a@hotmail.co.uk

Dan :thumbs:

He's already posted it fella :thumbs:

[Airbog]

Thanks mate.

[Airbog]

To Dan - deposit sent.
Airbog: Option 7 for S13 with CA18DET.

P.S. Dan, maybe you can check the whole width (in mm please) of S13 (CA18DET) rad+cowling?
Thanks

[Dan@DB-Power]

To Dan - deposit sent.
Airbog: Option 7 for S13 with CA18DET.

P.S. Dan, maybe you can check the whole width (in mm please) of S13 (CA18DET) rad+cowling?
Thanks

Hi Rysard

Total width should be about 77mm :)

Dan :thumbs:

[Razzario]

Dan i've just thought to ask this, in what way will the rads be altered to fit better in an s13 with CA18DET? Just curious

[Dan@DB-Power]

Dan i've just thought to ask this, in what way will the rads be altered to fit better in an s13 with CA18DET? Just curious

The hose inlet and outlet will be brought closer to the core :nod: also the legs will be the same as an OEM S13 rad :)

Dan :thumbs:

[Razzario]

The hose inlet and outlet will be brought closer to the core :nod: also the legs will be the same as an OEM S13 rad :)

Dan :thumbs:

nice one Dan, should be a nice addition to my pile of bits i'm someday going to fit :wack:

[ODINN]

hi, got 2 rads from You, on last grop buy.

Question - can You measure fans? thickness, widht, height ? and can you make photo of fans only?

I might be interested in set of two, + switch, etc.

and some funny questions - temperature sensors in those fans - will work only in water, or doesnt matter, those will also work in "air"?

Regards

[Dan@DB-Power]

Hi Odinn

I only have limited info at the moment, but here is what I can help you with:-

width and height will be 14" (roughly) thickness I will find out :)

The option you will need to go for is the one with the adjustable fan switch which goes into top or bottom hose, they go on water temp :)

Dan :thumbs:

[ODINN]

Hi Odinn

I only have limited info at the moment, but here is what I can help you with:-

width and height will be 14" (roughly) thickness I will find out :)

Dan :thumbs:

14"?? for 1 fan I belive O_o? so a set for 1 rad is 28"x14"?

post more photos when you will have some... fans, sensors, mounting... etc etc

when asking about temperature, I was just interested if those sensors will work in air enviroment too... just thinking about some experiment...

[Dan@DB-Power]

14"?? for 1 fan I belive O_o? so a set for 1 rad is 28"x14"?

:nod:


when asking about temperature, I was just interested if those sensors will work in air enviroment too... just thinking about some experiment...
I doubt it :(

[Dan@DB-Power]

Hi Odinn

Sorry chap, forgot the Fans are actually 12" :)

Dan :thumbs:

[Dan@DB-Power]

...

[rdnwlond]

thats me!

[super_woody]

super_woody, s14a (sr20det) Option 8

deposit sent via paypal

[ODINN]

Hi Odinn

Sorry chap, forgot the Fans are actually 12" :)

Dan :thumbs:

so, 24"x12"

will check few things and then... :D

[dukey]

how many we got in this one now???

you got any sig ads you want us to put out???

[Dan@DB-Power]

Yeah, Sig's would help as it would decrease the price :)

If anyone wants to make one then feel free, otherwise I'll make one tomorrow :)

Dan :thumbs:

[dukey]

im not sure how to do em so i will get yours 2morrow!

and then will post all i can lol.......

[Dan@DB-Power]

Hi Dukey

just paste this into your sig:-


Join the 2nd Radiator groupbuy (with a few extras) here:- £90 or £205 with a complete fan kit and cowling (http://www.sxoc.com/vbb/showthread.php?t=313696) :thumbs:

Dan :thumbs:

[Razzario]

Pasted :thumbs:

[30PSI]

Me too

[Alex]

Me too :)

Ill send my deposit shortly for just a radiator.

Any pics of SR20's with just the radiator fitted :confused:

[dukey]

done

[Muttly]

DAN!!!! The sig post is wrong. You've the wrong thread linked.
You've got http://www.sxoc.co.uk/vbb/showthread.php?t=313539 but it should be http://www.sxoc.com/vbb/showthread.php?t=313696

[Dan@DB-Power]

Sig link should be updated now :)

use this one:-



Join the 2nd Radiator groupbuy (with a few extras) here:- £90 or £205 with a complete fan kit and cowling (http://www.sxoc.com/vbb/showthread.php?t=313696) :thumbs:

[micraplay]

I've just payed my deposite for one of these (full kit with adjustable fan switch too), could you confirm the full price of this for me just so i know, all those otions are confusing!! - is it £205 + £20 for adjustable switch?

also, its for an s13 with SR20DET, so do i just get the same kit as for an s14? or is there a specific 's13 SR20' rad?! thanks

[StokeNutter]

Hey dan is this still open and when is full payment needed?

[Dan@DB-Power]

I've just payed my deposite for one of these (full kit with adjustable fan switch too), could you confirm the full price of this for me just so i know, all those otions are confusing!! - is it £205 + £20 for adjustable switch?

also, its for an s13 with SR20DET, so do i just get the same kit as for an s14? or is there a specific 's13 SR20' rad?! thanks

I should be able to get an S13 with SR20 rad :)

And yes the full price would be £225 with an adjustable switch :) or £215 if we meet the target of 50 :)

Dan :thumbs:

Stoke nutter, still open and full payment would be due at the end of Oct :)

Dan :thumbs:

[micraplay]

super, please update with info an availablitly of the sa13 SR rads. thanks

[StokeNutter]

Option 7 for me dan i will pay a deposit this week then the rest week after if thats cool. Oh yeah i have an s14a :thumbs:

[FlikstRR]

Hi dan can I change mine to an option 3 rather than 2. Deposit already paid.

Also is there any major advantage to having the ajustable in the hosing rather than the built in inline one in the rad???

I was gettin confussled. :(

[Andy_F]

Any chance you can put up a picture of one fitted with a cowling again, as it doesn't seem to work on the first place of the thread for me.

[Dan@DB-Power]

Hi dan can I change mine to an option 3 rather than 2. Deposit already paid.

Also is there any major advantage to having the ajustable in the hosing rather than the built in inline one in the rad???

I was gettin confussled. :(

Too be honest I would always prefer a built in non adjustable one as they are less prone to failure :)

[Dan@DB-Power]

Any chance you can put up a picture of one fitted with a cowling again, as it doesn't seem to work on the first place of the thread for me.

Here is the one that is in Polo's car:-

http://i55.photobucket.com/albums/g158/P0l0200sxy/29082007712.jpg

Dan :thumbs:

[FlikstRR]

ok cheers. In that case ill stick with basic option 3. rad+hoses+ fans and gubbins. :) cheers

[Hallsy]

Dan, just a couple of questions, sorry if they've already been asked.

With reference to S13......

Will the fans fit an OEM radiator?

If a radiator kit is bought without the hoses, do the original hoses fit OK?

[goingslideways]

spoke to you on phone yesterday
payment should be gettin sorted today
option 2 rad + hoses (ca18det)

[Dan@DB-Power]

Hi Hallsy

The fans will, and I think the cowling will aswell :)
The original hoses will fit the rad :)

Dan :thumbs:

[Paulpen]

Ive got some fans and a rad and just need a controller setup.

Would you be able to do a controller on its own ?

[deftone]

Stick me down for the full rad/hoses/fans/switches/whatever else fits in the box:p

[Dan@DB-Power]

Hi Paulpen

I can do an adjustable controller on it's own, but won't know a price until i buy them all in :)

Deftone

Use the link in the 1st post for the deposit :)

Dan :thumbs:

[dukey]

if the built in stat is accurate and more reliable then can i please change my order to rad fan cowling hoses and built in stat please??

how many do we have in the buy now? are we going to get lower price at all?

is there a specific date on the final payment yet?

cheers

chris

edit: so its option 5 for me for ca18det

[-WJ-]

kind of pissed now... Cause I've bought 3 of these rads from you for 130 gbp each :(

[Hallsy]

Dan, when are you expecting the fans/controllers? In with the rads?

I'm in need of some fans soonish so wondered if you'd be getting these in earlier?

[Dan@DB-Power]

-WJ-

Sorry chap, but at the time I wasn't preparing to do another Groupbuy on them :(

Sorry
Dan

Hallsy

Rads, fans etc will be coming in as one big shipment.

Dan :)

[Alex]

£20 deposit sent :) Cheers Dan :thumbs:

[Airbog]

Hallsy

Rads, fans etc will be coming in as one big shipment.

Dan :)
When? In January?

[Dan@DB-Power]

Jan sometime :)

but not making any promises this time :( but I would think Jan :)

Dan :thumbs:

[Damo]

oooooo that putting it a bit close to when i need to get me some seat time before the 1st time attack race :eek: hoping to get car mapped end of jan 1st week of feb at a push. the old test apex one and single fan i have should keep me going fine tho. just all the rewiring is a pain in the ass. i do it day in day out as part of my job as is :(

damo

[Nick_RX7]

Nick_RX7 S14 (SR20DET), Option 1 Deposit sent

[Pablo13]

Option 4 please! Deposit sent.

When do you require the balance to be paid?

[Bean Bandit]

Option 2 (rad & hoses) for SR20DET S13.5 (I'll probably need S14 mounts at the bottom as I have a complete S15 slampanel ;))
deposit sent per paypal, as I live in Switzerland and couldn't proceed through your website.

[Bean Bandit]

I'll take another one also Option 2 for S14 SR20DET
deposit through paypal, cheers

[Dan@DB-Power]

1 week left chaps, so get on the list quick if you want in :)

[RogTheDodge]

Hi Dan,

Just put my deposit down via paypal.

SXOC username - RogTheDodge
For 200sx S13 with CA18DET engine
Radiator GB Option 5 (the works)


Hope we get 9 more:thumbs:

[jankes]

hi dan
im after
Option 7 + Radiator
how much for those??
if i decide what info in order details write there??
cheers

[Dan@DB-Power]

hi dan
im after
Option 7 + Radiator
how much for those??
if i decide what info in order details write there??
cheers

£200 would be the total, thats the whole lot apart from the silicon hoses :)

As for details, just state option 1 & option 7 :)

Dan :thumbs:

[jankes]

ok mate
paid deposit via website for option1 & 7 for S14a SR20DET
add me to the list
cheers

[Andy_F]

Think I'll sort out a deposit for this before the end of the week. :thumbs:

[laze]

Hello,

I'm very interested.

I'd like to fit the radiator myself - is it literally a straight forward swap with the original?

Otherwise what's involved?

laze.

[Dan@DB-Power]

Hello,

I'm very interested.

I'd like to fit the radiator myself - is it literally a straight forward swap with the original?

Otherwise what's involved?

laze.

Yep the radiator is just a straight swap, remove old on and re-fit new one :)

Dan :thumbs:

[Dan@DB-Power]

Only 2 more days guys :)

[Dan@DB-Power]

Is there a Paul Brownless on here? if so I need to know your options ets?

Dan :thumbs:

[Pablo13]

Is there a Paul Brownless on here? if so I need to know your options ets?

Dan :thumbs:


Tis me, Option 4 mate, and I think that was deposit no 2 :thumbs:

[Alex]

Dan- 200jim was interested in one of your radiators from this thread http://sxoc.com/vbb/showthread.php?p=3611318&posted=1#post3611318

I don't think he knows how to get in on the GB though, he wanted to ring you and ask. Might be worth PM ing him :)

[Andy_F]

Just paid the deopsit. Option 5 please for CA18det. The paypal payment is from steve_faulkes1@hotmailDOTcom

[200jim]

yeah ive jus payed the deposit for option 5 will ring tomorow and pay full amount cheers people

[shaun_s13]

hi dan what is left to pay shaun_s13

[Dan@DB-Power]

Hi Guys

Here are the totals that are now due:-

1:-shaun_s13, s13 (ca18det) and option 1 (dep) (£82.50)
2:-R22Helipilot, S13 (ca18det) Option 4.5 Radiator + Fans and fitting kit + Cowling (dep) (£172.50)
3:-FlikstRR, S14 (SR20DET), Option 3 (Dep) (£107.50)
4:-Monkey Boy, S14 (SR20DET), Option 1 (dep) (£82.50)
5:-Shifty biscuits, S13 (CA18DET), Option 1 (dep) (£82.50)
6:- Damo S13, S13 (SR20DET), Option 5 (Dep) (£197.50)
7:- 30psi, Bluebire (CA18DET), Option 6 (Dep) (£82.50)
8:- Razzario, S13 (CA18DET), Option 1 Paid
9:- Muttly, S14a (SR20DET), Option 7 (dep) (£118)
10:- Airbog, S13 CA18DET Option 7 (dep) (£118)
11:- Dukey, S13 CA18DET Option 5 (dep) (£197.50)
12:- Super_woody, s14a (sr20det) Option 8 (dep)(£117.50)
13:- rdnwlond, s14a (SR20DET) option 5 (dep) (£197.50)
14:- micraplay, s13 (SR20DET), Option 5 (with adjustable fan switch too) (dep) (£217.50)
15:- develop, s13 (CA18DET), Option 2 (dep) (£107.50)
16:- Goingsideways, s13 (CA18DET), Option 2 (dep) (£107.50)
17:- Nick_RX7, s14 (SR20DET), Option 1 (dep) (£82.50)
18:- Pablo S13, s13 (CA18DET) Option 4 (dep) (£150)
19:- Bean Bandit, s13 (SR20DET) Option 2 (dep) (£123)
20:- Skidmark 100, Option 1 (dep) (£82.50)
21:- Bean Bandit S14 (SR20DET) Option 2 (dep) (£115)
22:- Rogthedodge S13 (CA18DET) Option 5 (dep) (£197.50)
23:- Jankes S14a (SR20DET) Option 1&7 (dep)
24:- Pablo13 S13 (CA18DET) Option 4 (dep) (£142.50)
25:- Andy F S13 (CA18DET) Option 5 (dep) (£197.50)

Payment need to be sent via paypal to:- dans14a@hotmail.co.uk or you can pay by cheque, pm me if you wish to pay by cheque.

Cheers
Dan :thumbs:

[Andy_F]

Moneys sent. Thanks. :thumbs:

[30PSI]

7:- 30psi, Bluebire (CA18DET), Option 6 (Dep) (£82.50)

Is this right dan? I was expecting £72.50 (80+12.5-20)

[Dan@DB-Power]

Is this right dan? I was expecting £72.50 (80+12.5-20)

Hi Martin,

Sorry you are right, I did get it right but then changed it as it didn't look right :wack:

you can knock £12.50 if your happy for me to take it to the HWH meet in Jan?

Dan :thumbs:

[30PSI]

HWH meet would be a good idea yeh, I suspect they won't be ready to send out before then assuming the turnaround is the same as the rads?

[Dan@DB-Power]

:no: :(

They are arriving with the rads :(

Dan :thumbs:

[30PSI]

Thats ok. I'll send the money shortly, and will pick up at HWH

EDIT - Already sent :thumbs:

[Alex]

Paypal isnt working for me, ill try again tonight :thumbs:

[Bean Bandit]

money sent via paypal :)

[dukey]

full payment sent!

[R22helipilot]

Payment sent :thumbs:

[-***JOKER***-]

hey Dan could you get me the dimensions of the cowling and where they go for the fitting please...i got the rad below and want to know if it will fit...

thanks

http://i10.photobucket.com/albums/a101/gorkemjoker/JOKER%20s%20S13/18102007141.jpg
http://i10.photobucket.com/albums/a101/gorkemjoker/JOKER%20s%20S13/18102007133.jpg
http://i10.photobucket.com/albums/a101/gorkemjoker/JOKER%20s%20S13/18102007140.jpg
http://i10.photobucket.com/albums/a101/gorkemjoker/JOKER%20s%20S13/P1010349.jpg

[goingslideways]

full payment sent this morning
option 2 rad and hoses

[FlikstRR]

3:-FlikstRR, S14 (SR20DET), Option 3 (Dep) (£107.50)


Er.. not sure this is right.. but maybe im confused. Can you let me know what you have me down for dan?


Ps. Locking collars and engine dampener went on perfect. :thumbs:

[Dan@DB-Power]

FlikstRR:-
I've got you down for option 2 which is £115

£115 + £12.50 postage minus the £20 deposit :)

Dan :thumbs:

[FlikstRR]

ah thats the confusion... i thought i was option 3.

not sure whether the leccy fans are better than the current big ass white one though..
is there obvioud cooling gains?

[Dan@DB-Power]

ah thats the confusion... i thought i was option 3.

not sure whether the leccy fans are better than the current big ass white one though..
is there obvioud cooling gains?

The electric fans will do a better job, but the standard mechanical fan is good enough imo.

I can bump you upto option 3 if you want :)

[FlikstRR]

if its good enough, then ill stay option 2.. money an all.


Ps, on a tangent dont suppose you stock hose clamps for have any kicking about?

[Dan@DB-Power]

Ps, on a tangent dont suppose you stock hose clamps for have any kicking about?

Afraid not no :(

Dan :thumbs:

[Airbog]

Sent.

[Alex]

Monies sent :)

[super_woody]

will this go ahead without the 30 ppl and ill pay you fully next friday buddy :)

[Dan@DB-Power]

Yep is going ahead as we speak :)

Dan :thumbs:

[super_woody]

ok sweet sent the cash to ur paypal (dans14a@hotmail.co.uk)
i sent 117.50 for option 8 which means im fully paid up :)

when can i expect delivery?

[shifty biscuits]

You have sent £82.50 GBP to dans14a@hotmail.co.uk. An email has been sent to the recipient. :thumbs:

[deftone]

Hey mate, I put my name down, but havnt paid the deposit on time, can i still get in?

[Dan@DB-Power]

Hi Deftone, yeah just send over the total with your option, car type and username to dans14a@hotmail.co.uk (paypal)

Super Woody, the fans etc are due in around January :)

[doz]

I have a spare one of these un-used for a S13 (CA/RB transplant) if anyone needs one sharpish :)

[shifty biscuits]

hey dan, when do you rekken the rad will be with me?

[micraplay]

sorry ive not been following this too well - my rad is leaking, when is the expected time for delivery on these? i wanted the whole nine yards for an s13 with sr20det fitted. ive paid the deposite - do i need to settle in full yet?

thanks

[Damo]

From what i under stand, reading this thread.

Is that everthing is coming in one large shipment by boat to dan landing with him in jan just after xmass i think of which dbpower will then send out to you. we need to pay the rest of the bill up now

im sure dan will confirm all this tho :thumbs:

[Dan@DB-Power]

As Damo says really :)

Dan :thumbs:

[Bean Bandit]

just some cosmetics ;)
19:- Bean Bandit, s13 (SR20DET) Option 2 (dep) (paid)

[Airbog]

Same with me, Airbog;)

[shifty biscuits]

1:-shaun_s13, s13 (ca18det) and option 1 (dep) (paid)
2:-R22Helipilot, S13 (ca18det) Option 4.5 Radiator + Fans and fitting kit + Cowling (dep) (paid)
3:-FlikstRR, S14 (SR20DET), Option 2 (Dep) (£115)
4:-Monkey Boy, S14 (SR20DET), Option 1 (dep) (£90)
5:-Shifty biscuits, S13 (CA18DET), Option 1 (dep) (£90)
6:- Damo S13, S13 (SR20DET), Option 5 (Dep) (£205/£195)
7:- 30psi, Bluebire (CA18DET), Option 6 (Dep) (paid)
8:- Razzario, S13 (CA18DET), Option 1 (Paid in Full) (£90)
9:- Muttly, S14a (SR20DET), Option 7 (paid)
10:- Airbog, S13 CA18DET Option 7 (paid) (£110)
11:- Dukey, S13 CA18DET Option 5 (dep) (Paid)
12:- Super_woody, s14a (sr20det) Option 8 (dep)(paid)
13:- rdnwlond, s14a (SR20DET) option 5 (dep) (£205/£195)
14:- micraplay, s13 (SR20DET), Option 5 (with adjustable fan switch too) (dep) (£225/£215)
15:- develop, s13 (CA18DET), Option 2 (dep) (£115)
16:- Goingsideways, s13 (CA18DET), Option 2 (paid) (£115)
17:- Nick_RX7, s14 (SR20DET), Option 1 (dep) (£90)
18:- Pablo S13, s13 (CA18DET) Option 4 (dep) (£150)
19:- Bean Bandit, s13 (SR20DET) Option 2 (paid) (£115)
20:- Skidmark 100, Option 1 (dep) (paid)
21:- Bean Bandit S14 (SR20DET) Option 2 (dep) (paid)
22:- Rogthedodge S13 (CA18DET) Option 5 (dep) (£205/£195)
23:- Jankes S14a (SR20DET) Option 1&7 (dep) (£200)
24:- Pablo13 S13 (CA18DET) Option 4 (dep) (£150)
25:- Andy F S13 (CA18DET) Option 5 (dep) (Paid)
i paid in full on monday but you seem to of missed me and not changed the list. can you edit the list accordingly, ta:thumbs:

[RogTheDodge]

Just paypal'ed the full amount for mine:thumbs:

Roger

[Dan@DB-Power]

i paid in full on monday but you seem to of missed me and not changed the list. can you edit the list accordingly, ta:thumbs:

I can't seem to find it on my paypal, have you got a transaction ID number?

Cheers
Dan :thumbs:

[shifty biscuits]

i expect so. i will find it and pm you.

[rdnwlond]

sent payment by cheque last week some time..:thumbs:

[super_woody]

can i upgrade to option 5 please buddy?

[Dan@DB-Power]

can i upgrade to option 5 please buddy?

Yeah no worries, remaining amount is £80 :):thumbs:

[super_woody]

sent an extra £80 :)

[Muttly]

Dan. Any chance you've a spare rad for a 14a on the way? I've someone looking for one asap. If you've a spare coming I'll take it and give him my one.

[micraplay]

14:- micraplay, s13 (SR20DET), Option 5 (with adjustable fan switch too) (dep) (£225/£215)

this is me - how much more do i need to pay you? (can remember what deposite i sent and unsure what the 225/215 means!!

[Dan@DB-Power]

14:- micraplay, s13 (SR20DET), Option 5 (with adjustable fan switch too) (dep) (£225/£215)

this is me - how much more do i need to pay you? (can remember what deposite i sent and unsure what the 225/215 means!!

Hi Mate

Remainder is £225-£20 deposit = £205 + £12.50 postage which is £217.50 :)

Dan :thumbs:

[FlikstRR]

totally forgot about this group buy!!!!!!! can i be remimnded how much i owe and when its due?
also when will they be landing?

[Dan@DB-Power]

totally forgot about this group buy!!!!!!! can i be remimnded how much i owe and when its due?
also when will they be landing?

Remainder is £107.50 :) It due now, well 3 weeks ago :wacl:

They are all ordered and will be arriving Late Jan if all goes to plan :)

[Pablo13]

Hey dan, I sent this to your hotmail and DB Power a while ago and have not heard anything back yet so I will post it on here and wait for a reply :thumbs::

Dear Dan,

I am pablo13 off sxoc I would like some clarification as to whats left to pay on the alloy rad group buy. I sent a deposit of £20 first. Then, when I was ordering a big brake kit from you, on the totals page it also said "Radiator group buy deposit no.2" which was also £20. Which I paid along with my brake order. So I belive there is £110 left to pay, as I will also collect from you from Januarys HWH meet. I would apprieciate if you could check you records and confirm this for me. Thanks.

Regards
Paul

[ODINN]

group buy closed already, or there are some fans left? might be interested in option 7 x 2

[Muttly]

Dan. Any chance you've a spare rad for a 14a on the way? I've someone looking for one asap. If you've a spare coming I'll take it and give him my one.Bump. Also how much do I owe you for what I've ordered?

[Dan@DB-Power]

Pablo, I think I responded to your e-mail :confused:

Anyhow amount remaining is £130 (£150 - £20deposit)

Odinn

Sorry mate it's long gone :(

Muttly
YHPM, Remaining amount is £90 + £28 postage :)

Dan :thumbs:

[Pablo13]

I had not recieved any emails from you, strange? Payment sent now :thumbs:

[micraplay]

how do i pay you dan?

[Develop]

15:- develop, s13 (CA18DET), Option 2 (Paid in full)


hi dan,

just checking you remembered i change from option 2 to option 3 :thumbs:

[Dan@DB-Power]

how do i pay you dan?

Hi Mate

Just paypal the remaining amount to:- dans14a@hotmail.co.uk

Cheers
Dan :thumbs:

[MaLicE]

you got any hoses left???? need some desperate :(

[micraplay]

Remainder is £225-£20 deposit = £205 + £12.50 postage which is £217.50

. . . . all paid up now via paypal

[Turbo'd_up]

Would it be possible just to buy a fan cowling kit?

[Damo]

Hey dan hope your having a good xmass and new year

Did you ever get a eta date on when you will get all the rads?

thanks
damo

[Dan@DB-Power]

Hi Guys

ETA at present is Mid Feb :) but will try and push for an earlier time :)

Dan :thumbs:

[goingslideways]

just a quick question
the first post said that the rad should be recieved a couple of months
after the group buy closes
how come its mid feb now mate

[Dan@DB-Power]

just a quick question
the first post said that the rad should be recieved a couple of months
after the group buy closes
how come its mid feb now mate

It's just the case my supplier taking longer than planned, and the problem of trying to get a free boat out of china :(

Dan :thumbs:

[Muttly]

Dan can you change the option for mine. I'm down for 7 but I must add a rad to that. I pm'd you about it a while ago.

[Nick_RX7]

Hi Dan, Full payment sent on 23rd December

Cheers

[Damo]

just want to check these are still ok for end of feb? as i will sell on the apex test one i got about a year ago off them

thanks
damo

[Dan@DB-Power]

Hi Damo

Yep all on Schedule :)

Dan :thumbs:

[Damo]

ah good good thanks bud

[goingslideways]

have we got an expected date for these yet

[Dan@DB-Power]

expected delivery date will be around the 20th to me :) add a week on for customs clearance and packaging though :)

Dan :thumbs:

[Damo]

:cool:

[Pablo13]

So will these be available to collect at this months HWH or the next?

[Muttly]

Hey Dan. Can you check what I owe you on this please. I'd like to get it sorted asap. I'll also be on to you for a set of 322 z32 rears.

[Dan@DB-Power]

Pablo
It will be close for on the safe side, next HWH :)

Muttly,
I think it works out to £180+ £28 postage :) as for the 322 kit, will be ready within the next couple of weeks :)

Dan :thumbs:

[goingslideways]

do you reakon these will be about for the weekend dan

[Dan@DB-Power]

:no:

next weekend is possible though :)

[ex-ctr]

:no:

next weekend is possible though :)

don't forget mine;):)

[shaun_s13]

hi dan the rads here yet

[Dan@DB-Power]

They are in the UK :) still waiting for them to get released from Customs & Excise though :)

[potts85]

dan any chance i could get in on this buy?

looking for rad,fans, fan controller and hoses

[goingslideways]

any news yet. its been long

[Dan@DB-Power]

They are in the UK, still awaiting customs clearance :annoyed:

[potts85]

trust me guys when i say you wont be disapointed with these rads, got the one from dans own car and they are the nuts so hang in there its well worth the wait :thumbs:

[Dan@DB-Power]

Update, they are being delivered to me on Friday, so with luck and a bit of overtime at the weekend, they will get sent out on Monday :)

Dan :thumbs:

[ex-ctr]

Update, they are being delivered to me on Friday, so with luck and a bit of overtime at the weekend, they will get sent out on Monday :)

Dan :thumbs:

do you still have my address:)

[Dan@DB-Power]

do you still have my address:)

Should have, but PM it to me just in case :)

Dan

[goingslideways]

should i be able to collect saturday

[Damo]

cool nice one dan

[Airbog]

Dan,
hope you have my address too.

[Dan@DB-Power]

Goingslideways:- Yeah no worries for collection on Sat :) Drop me a call on 07843 201764 :)

Airbog:- Yep got it :)

Dan :thumbs:

[Razzario]

any spare rad hoses Dan?

[FlikstRR]

Dan im up in hemel sat too, can i drop the rest of the cash off (sorry totally forgot with BDC prep) and collect too if thats ok?

will give u a ring anyway. :thumbs:

[micraplay]

any update as to when we might recieve the rads?

[shifty biscuits]

mine turned up today, looks good:thumbs:

[shaun_s13]

mine turned up too many thanx do you have any fans spare

[Razzario]

got mine :thumbs:

[Dan@DB-Power]

Hi Guys,

Well what a fun few days it's been :wack:

Anyone who ordered just a rad should have received there's by today :) Everyone else i.e. Rad + cowling guys will get theres on Thursday/Friday i.e. leaving tomorrow on a 48hr :)

Thanks for your patience on this, it's appreciated. Any problems please let me know :)

Dan :thumbs:

[30PSI]

Dan don't send mine out please. I'll get it at the next HWH meet if thats possible

[Dan@DB-Power]

Dan don't send mine out please. I'll get it at the next HWH meet if thats possible

Don't worry, I've got yours :)

Dan :thumbs:

[Bean Bandit]

do you have a tracking number for my 2 rads?
Cheers

[Monkey Boy]

Got mine :thumbs: Thanks Dan :)

[Dan@DB-Power]

Hi Bean Bandit

Yours will be leaving soon (internationals are on different days), although I need your address and phone number :)

Dan :thumbs:

[Razzario]

just to say dan, the rad looks top notch... i've not fitted it yet but it certainly looks the dogs :)

[Bean Bandit]

Hi Bean Bandit

Yours will be leaving soon (internationals are on different days), although I need your address and phone number :)

Dan :thumbs:

you have PM, X-mas card arrived ;)

[shaun_s13]

dan do you have any of the twin 12" fans spare

[Dan@DB-Power]

Hi Shaun

Yep have the fans, they are £40ea + postage :)

Dan :thumbs:

[shaun_s13]

how many would i need mate

[jankes]

hi ,i got it today morning,anybody try to fit that??.....there is few issue with cowling,on my s14a with A/C the cowling just dont want fit,coz the one of the fan stuck with that AC barrel or whatever is name,i try to move fan closer to middle,just 4 holes to redrill.....grrrr,and i have to move ic pipe closer to manifold coz cowling stuck on bov pipe.....its not plug and play kit :-(....anybody have same issue???

[ex-ctr]

hi did you use parcelforce 48 as the coventry branch are crap, a couple of times they have not left a missed delivery ticket and its only by contacting the seller that i found out:nod: [im in a bit of a rush to get mine as its holding up me finnishing my front end:nod:]

[micraplay]

got mine today guys, rad looks ok at first glance but cant say im too impressed with the cowling at the moment. the large bolts at the bottom are fastened in a way that makes them virtually impossible to tighten, and the cut out for the lower pipe looks like it was cut out by a 6yr old with blunt tin snips!! nothing i cant sort, just a bit disapointed to recieve new items of poor quality. overall happy with the purchase and service

[dukey]

have all these been sent now?

[Muttly]

have all these been sent now?I was wondering the same.

[micraplay]

also regarding my rad kit, could you tell me what the method of adjustment is for the fan control switch? just that at the moment i'm failing to see how it is adjustable.

[jankes]

there is a manual in the box with controller mate