Stage 2 questions

[Stevey]

A few questions about my mapping issues

Atm its manual car with a auto ECU and wiring ,

Also i have a Greddy IC , Walbro , Exhuast and apexi induction kit with box, AVCR and some 555 to fit is there anythink else i would need ?

Also when i rebuild the engine i had the pistons and conrods balanced
and the Crank,Crank Pulley, Flywheel,Clutch and clutch cover lightened and balanced , Would this make any difference to the Stage 2 ? ?

Sorry I'm being a pain in the ass :wack:

[Jez]

The requirements for stage 2 are here: http://www.h-dev.co.uk/index.php?cPath=42_47

The balancing won't adversly affect your setup at all :)

[Stevey]

Also im still running the standard t28 atm , Would this cope or will id be in trouble , Keep thinking up more questions :rolleyes: :wack:

[Stevey]

Also it has a auto ecu in it atm , Will this make a change

[Jez]

The standard T28 should be ok, but will all tuning it'll probably reduce its life span if driven hard.

If you have an auto ECU you should get an auto ECU upgrade :)