Part Requests

[David Reid]

Please add your parts requests here.

Thanks

David

[S14boss]

alrite chaps, its ross from over at pitt engineering, not seen u about 4 a while. was just after a non touring waser bottle

[David Reid]

alrite chaps, its ross from over at pitt engineering, not seen u about 4 a while. was just after a non touring waser bottle

Ross,

Pop over on saturday I think we now have two. :)

[towley]

Hi,
I've discovered that the reverse gear changing fork thing in my gearbox has broken. Do you have one lying around, or a bust 'box that might contain one still in tact? Or do you know any place that might have one available?
Cheers,
Tom

[markgtir]

Bit of an odd request but do ya have an S14/A A-Pillar Trim which hasn't been drilled for a boost guage pod?

[hanuszt]

Hi
I'm looking for a knock sensor for a S14!
I also may would be interested in a used Z32 AFM (would depend on price...)
Do you have any ?
Thanks

[Jeffers_S13]

Hi,
I've discovered that the reverse gear changing fork thing in my gearbox has broken. Do you have one lying around, or a bust 'box that might contain one still in tact? Or do you know any place that might have one available?
Cheers,
Tom

Hello

Sorry, we dont have any scrap gearboxes at the mo so cant help Im afraid.

Thanks

James

[Jeffers_S13]

Bit of an odd request but do ya have an S14/A A-Pillar Trim which hasn't been drilled for a boost guage pod?

PM'd :)

[slider91]

hi peeps I am now looking for a clutch that will handle 350 bhp could you guys please give me a price delivered and what type.

thanks

[towley]

OK, i'm still after a fork so if you do get any scrap gearboxes could you let me know.

Cheers

Tom

[S14matt]

Do you have any s14 front bumpers? In red would be even better but not essential. If so how much

Cheers

Matt

[S14boss]

when do you guys think you will have these sorted? just trying to plan some days off to get them fitted, cheers, Ross :wack:

[paullen]

Hi,

Are you likely to get anymore R33s in for breaking? I'm after the rear brake set up, minus the calipers and discs.

Cheers

[sarefeet]

Got any top strut mounts for an s14a? standard or adjustable?

[j4mes]

do you ever get any ca's in?? im not really 100% happy with mine :)

[David Reid]

Yes we're always on the lookout for them ! these parts always go quickly so we dont have any at the mo.

[paullen]

Thats cool, could you PM me if and when you get some? S13 handbrake mech and backplate will do too :)

[David Reid]

OK may be able to help this week pm, me a contact number

[David Reid]

We have looked at few, but have not yet found any we are happy to sell on. RB25det conversion??:)

[David Reid]

We have standard front and standard and pillow ball rear, PM for deatils

[David Reid]

PM'd

[David Reid]

Sorry we dont do new parts at the moment

[JP]

Do you have any R34 GTR Gold rear Brembo Callipers?

[kkydd]

any GTR brakes? also do you have any z32 AFMs in?

[David Reid]

OK, i'm still after a fork so if you do get any scrap gearboxes could you let me know.

Cheers

Tom

Sorry we dont have any scrap ones

[David Reid]

Do you have any s14 front bumpers? In red would be even better but not essential. If so how much

Cheers

Matt

We have a green one with splitter

[David Reid]

Do you have any R34 GTR Gold rear Brembo Callipers?

Sorry, not at the moment

[David Reid]

any GTR brakes? also do you have any z32 AFMs in?

Do you need fronts or rears, may buying a set soon to give us rears for our drift car. Sorry no Z32's

[timharding]

What price would you be looking at for an RB25 conversion?

[timharding]

???

[David Reid]

Pm sent

[Kneel]

could you PM me with same info David?

[David Reid]

PM sent ;')

[BIG RED JOHNSON]

could i have the info as well please:)

[David Reid]

PM sent

[SECCY]

R33 handbrake cables?

[David Reid]

Sorry, just sold them today

[j4mes]

s13 facelift (280mm) caliper carriers. i have a facelift but it has the smaller carriers :(

[David Reid]

s13 facelift (280mm) caliper carriers. i have a facelift but it has the smaller carriers :(

Sorry we dont currently have any S13 bits, but would s14a 280mm fit?

[j4mes]

i'd have to go 5 stud hub and 14a calipers, cant quite manage that at the mo

[Pete C]

Do you ever get any R32 GTS/GTS-t in? I'm after a pair of front lower arms :)

[Jeffers_S13]

Yeah, we've done a few now. We have a pair of arms on the shelf that I know of and a pair on a car at the unit at the mo, see this thread for prices :) :

http://www.sxoc.com/vbb/showthread.php?t=301420

Is this for a 200SX ? if so, bear in mind they dont have holes for the front ARB in them.

Thanks

James

[Pete C]

That thread you linked to is for an R33, I'm after R32 arms as I understand they're the same as S13, but the balljoints have the same taper as S14 ones ;)

[Jeffers_S13]

That thread you linked to is for an R33, I'm after R32 arms as I understand they're the same as S13, but the balljoints have the same taper as S14 ones ;)

Sorry, didnt read you request properly :o We havent done any R32's yet Im afraid.

[Pete C]

Sorry, didnt read you request properly :o We havent done any R32's yet Im afraid.

No time like the present - I'm sure there must be people on here looking for RB20DET conversions ;)

[Jeffers_S13]

No time like the present - I'm sure there must be people on here looking for RB20DET conversions ;)

Its finding them ! I think the majority get given Cat B which we arent allowed to buy...yet. We are always on the lookout for different cars but it only ever seems to be 14's, 14a's, R33's and the odd Z32 that come up at reasonable prices.

[tomo1]

Hello gents,

Im after the rear hubs for an s14 including the studs- do you have those bits, or the whole rear subframe?

Cheers
Tom

[lewisneale]

i am after a s14 turbo. do you have any in good nick?

[andyrt]

I'm after a green OS door & the glass for the NS door mirror. If you have the door, how much for delivery? I’ll be passing by next week if it’s safer to pick up.
Also do you have any of the AC condensers second hand or are they all to bad to bother with. It just that I don’t know for sure if that is where mine is leaking from…

[David Reid]

Hello gents,

Im after the rear hubs for an s14 including the studs- do you have those bits, or the whole rear subframe?

Cheers
Tom


Hello the rear hubs are 45 each, we could deliver for £105

[David Reid]

i am after a s14 turbo. do you have any in good nick?

Yes details are in this thread

http://www.sxoc.com/vbb/showthread.php?t=296922

[David Reid]

I'm after a green OS door & the glass for the NS door mirror. If you have the door, how much for delivery? I’ll be passing by next week if it’s safer to pick up.
Also do you have any of the AC condensers second hand or are they all to bad to bother with. It just that I don’t know for sure if that is where mine is leaking from…

PM sent

[enzo]

Hi mate, I need the gearbox mounting for a manual box, S14/a, and the gear lever surround and gaiter if in good condition.

Seen these in your S14/S14a sticky.

Price with postage please to S36 postcode. :thumbs:

Cheers.

[tomo1]

thanks for the reply- any ideas on cost inc postage for 1 hub and studs + nuts to BA12 postcode

Cheers

[David Reid]

thanks for the reply- any ideas on cost inc postage for 1 hub and studs + nuts to BA12 postcode

Cheers

Pm sent

[Fil]

Hi Guys,

Do you currently have any RB25 into S13 packages in stock?

If so what sort of mileage does it have on it?

I'm thinking this may be the way to go...

[Alex]

Im after an S15 turbo with as low mileage as possible, not in any rush but if you get any soon could you pm me please, im pretty local aswell ;)

[tomo1]

pm sent ref lots of bits
Tom

[Fil]

Hi Guys,

Do you currently have any RB25 into S13 packages in stock?

If my car doesn't sell by the end of the month, I'll be doing the RB25 swap :)

I'm pretty much set on this path now, so let me know if you have any in stock so I can start doing the sums :thumbs:

[paradigm shift]

Guys, can you PM me a price for the following delivered to AL2 :thumbs:

s14a o/s lower suspension arm
s13 handbrake shoe adjuster (or just the bit that slots into the tube part)
spring that sits just above the adjuster
a pin/washer/spring to hold the shoe to the backplate

bought a setup from someone a while back.. just went to fit it and missing some irritating parts :rolleyes:

[David Reid]

Guys, can you PM me a price for the following delivered to AL2 :thumbs:

s14a o/s lower suspension arm
s13 handbrake shoe adjuster (or just the bit that slots into the tube part)
spring that sits just above the adjuster
a pin/washer/spring to hold the shoe to the backplate

bought a setup from someone a while back.. just went to fit it and missing some irritating parts :rolleyes:

We can help with the suspension arm (front or rear?)

But i cant help with the handbrake stuff as we sell all of ours in kits sorry

[paradigm shift]

d'oh.. front please!

[ashleydc]

Just a long shot, i wondered if you had the 'retaining ring for the turbine end' off a garrett T28 turbo. Its a semicircular ring with bolt holes in approximately 100mm in diameter, that holds the two halves of the turbo together.

[Jeffers_S13]

Just a long shot, i wondered if you had the 'retaining ring for the turbine end' off a garrett T28 turbo. Its a semicircular ring with bolt holes in approximately 100mm in diameter, that holds the two halves of the turbo together.

I can probably do you one of these from my own stash of duff turbos ! :D

Say £6 delivered ?

[Shelts]

Have you got any s14a front calipers in:)

[michael]

Hi mate, have u a Drivers side front wing and side light and a Front bumper for a 96 S14

[Jeffers_S13]

Have you got any s14a front calipers in:)

PM'd :)

[Jeffers_S13]

Hi mate, have u a Drivers side front wing and side light and a Front bumper for a 96 S14

I think we have a wing and maybe a side light yes, we havent got a front bumper though.

I will check at the unit tonight.

Thanks

James

[michael]

OK mate, if u could let me know that would be great

[davidsr20det@gm]

hi
would you have an oil pump for a gtir pulsar.
cheers

[Jeffers_S13]

hi
would you have an oil pump for a gtir pulsar.
cheers

We have a used oil pump from an SR20DET ? I suspect the pump from a pulsar will be the same ?

http://www.sxoc.com/vbb/showthread.php?t=314274

[rudelude]

Hi do you have a front splitter for a S14a 1998?

Thanks Rob

[Jeffers_S13]

Hi do you have a front splitter for a S14a 1998?

Thanks Rob

PM'd :)

[bozzeye]

alrite lads. i'm after a price of a ca18det. i think im gonna scrap the shitter in mine

[JP]

Front splitter for an S14a, R33 GTST (or Z32) rear discs? Also, R34 GTR brake master cylinder! :thumbs:

[Mitch 200SX]

I need a s14a manual gearbox asap please.

[Jeffers_S13]

alrite lads. i'm after a price of a ca18det. i think im gonna scrap the shitter in mine

Sorry, we dont have any CA's Im afraid.

We can do you an SR20 or an RB25 though !? :)

[Jeffers_S13]

Front splitter for an S14a, R33 GTST (or Z32) rear discs? Also, R34 GTR brake master cylinder! :thumbs:

14a splitter - Yes, slightly scuffed on one side £150.
R33 GTST siscs - Yes I think so, need to check at unit.
R34 Master Cylinder - Sorry, cant do, only have R33 GTST ones on the shelf at the mo

Thanks

James

[Jeffers_S13]

I need a s14a manual gearbox asap please.

Hello

We dont have any 14a manual boxes spare at the moment Im afraid.

All we can do at the moment is one of the two 6 speed boxes (and all the trimmings to suit 14a conversion) we have from the Spec R's we have done. We also have a nice twin plate clutch available to suit these aswell.

Thanks

James

[JP]

Splitter's a bit pricey tbh, thanks though.


R33 GTST siscs - Yes I think so, need to check at unit.
Sound - let me know when you have the condition & price please! :)

[bozzeye]

Sorry, we dont have any CA's Im afraid.

We can do you an SR20 or an RB25 though !? :)

that sounds very temting:nod: . how much would all the bits for and rb25 conversion cost on an s13

[David Reid]

Splitter's a bit pricey tbh, thanks though.


Sound - let me know when you have the condition & price please! :)

Sorry its the backplates and handbrake parts we have :(

[JP]

Sorry its the backplates and handbrake parts we have :(
No bother - thanks anyway! :)

[Jeffers_S13]

that sounds very temting:nod: . how much would all the bits for and rb25 conversion cost on an s13

Hello

Please see this thread :

http://www.sxoc.co.uk/vbb/showthread.php?t=297112

Thanks

James

[Steve-O]

Hi there

S14A - Front passenger side sidelight unit please to fit my 1999 S14a. Must be in perfect nick - no marks etc.

Have anything ?

cheers

Steve

[bozzeye]

Hello

Please see this thread :

http://www.sxoc.co.uk/vbb/showthread.php?t=297112

Thanks

James

hi there,

ive had a look a could be very interested in an rb25, i dont no how much work would be involved or what is required but i no i would like 1 to be rebuilt to run 4/500bhp and would you suply all the parts for this. if this is possible would you be able to give me a rough price

thanks very much
andy

[Jeffers_S13]

hi there,

ive had a look a could be very interested in an rb25, i dont no how much work would be involved or what is required but i no i would like 1 to be rebuilt to run 4/500bhp and would you suply all the parts for this. if this is possible would you be able to give me a rough price

thanks very much
andy

Hello

Have a look around on HybridZ.org. There are a few poeple on there running up to 500BHP on standard internals, the only thing you really need are the supporting mods like turbo, exhaust, intercooler etc etc

We cant supply the additional parts you would require Im afraid (although I *think* we have a standard R33GTR intercooler on the shelf). We can only supply that parts that come off cars we dismantle and we've only done mostly standard cars so far.

As we only run this business in our spare ! LOL ! time, we have very limited time left for anything else, hence why Im here, on a Friday night, working on our PPS website instead of doing some elbow bending in the pub with my mates :cry:

Our main priority, after sorting parts for people etc, is sorting our drift car out for next season so building a high spec RB25 just isnt possible at present. Sorry we cant be of any more assistance.

If you want to come and view/hear the RB25 we have running then we can sort a time out for you to do this.

Let me know :thumbs:

Thanks

James

[Jeffers_S13]

Hi there

S14A - Front passenger side sidelight unit please to fit my 1999 S14a. Must be in perfect nick - no marks etc.

Have anything ?

cheers

Steve

Sorry, front lights are rarer than rare, we sold our only pair recently to someone for a front end conversion. Please keep your eyes on these pages though as our inventory changes all the time.

[bozzeye]

thanks very much for your help matey, i'll be in touch in the future and i'll see wot you have then. i'm just trying to get a rough price on the whole project at the mo, thanks agian and good luck with yours

[Fil]

Hi Guys,

Do you currently have any RB25 into S13 packages in stock?

If so what sort of mileage does it have on it?

I'm thinking this may be the way to go...

Did you ever manage to have a look for me?? I never got a response first time round :(

[Jeffers_S13]

Did you ever manage to have a look for me?? I never got a response first time round :(

Sorry for not responding. I think it has 120k km on it or ~78k miles. This is still in the car at the unit and can be heard running :)

Thanks

James

[Fil]

Sorry for not responding. I think it has 120k km on it or ~78k miles. This is still in the car at the unit and can be heard running :)

Thanks

James

Thanks James,

Have you got any more lined up with less miles in the near future?

I'm not massively botherd about the miles, but that's done more than the CA18 that it would be replacing :D

[Tom_W]

I did an rb25det engine conversion a couple of years ago and I now need a second rb25 to allow me to build the other to my deisred spec.

How quickly can you supply and engine with no manifolds, just would like oil/water pump on dont mind about alternator.

As low miles and good condition as possoble.

What price and when could it be delivered?

I have just got a refund after 4 weeks waiting on another engine so am in a big hurry....
thanks

Tom

[Jeffers_S13]

Fil,

We only have that one at the mo, we cant predict beyond say ~2 weeks what we are going to get in, it depends what people crash :wack: as such, we wont have anymore Skylines for at least a couple of weeks.

NiteRyder,

We have this one available now, its still in the car so prospective buyers can see and here it running. If you are planning to rebuild it, then maybe you arent bothered about hearing it run (?) If so, then we can have it out and on a pallet to you within a couple of days ? let me know.

We've sold all our previous RB25's as conversion packages so pricing is already determined. I'll discuss with Dave and sort a price for just the engine.

James

[Chris 180SX]

Hi,

Just wondering if you had the required bits for me to convert my 180SX from auto to manual?

Cheers,

Chris

[Fil]

Fil,

We only have that one at the mo, we cant predict beyond say ~2 weeks what we are going to get in, it depends what people crash :wack: as such, we wont have anymore Skylines for at least a couple of weeks.



Thanks James.
Keep me posted if you do find out when the next one's arriving :thumbs:
I might have managed to sell the wife's old Colt by then to free up the cash to buy the bits :)

[Jeffers_S13]

Hi,

Just wondering if you had the required bits for me to convert my 180SX from auto to manual?

Cheers,

Chris

If its SR20 powered then yes, we have a manual 14a arriving very soon :)

[Magic]

Hi

I had a crash yesterday,and I m looking for replacement parts for my s14a,
Front bumper and drivers side front wing,headlight,sidelight if you have any of them parts please let me know cuz need to have that car back on the road as it it only vehicle I got.

Also looking for cowling for viscous fan and washer tank with pump,sorry forgot to mantion my car is accually s14 with s14a front so I dont know if it make any differents to cowling and washer tank and pump,you ll probably know better.Also interested in taking s14a washer pipes off you so I could finally connect jets on headlights.

Cheers

[Magic]

almost forgot...the slam panel as well,
preferably from s14a but last time I ve bend s14 one and was working fine so I can probably repeat that again

[Magic]

bump?

[David Reid]

Hello

We have a car with a complete front end in saphire arriving tomorrow, the complete front, i.e Bonnet, 2 wings, all lights, bumper, splitter, bumper support bars will be 650

Fan shouds are all the same s14 to s14a and are 40 and in stock, viscous fan is 15 and in stock. We also have a slam panel which would be 35. Washer pipes you can have

If you want all of the above you can have them for 700 collected

[Magic]

Dont really need all of this mate the car is not that damaged, but definetly want:
-front bumper
-drivers front wing
-drivers headlight
-drivers sidelight
-shroud
-slam panel

is that possible to get these parts can collect from monday,what do you say?

[David Reid]

Pm'd but Monday wont be possible as we have not recieved the car yet, Wednesday may be OK though

[Stick23]

Hi David,

I'm after a s14a black leather drivers seat, can you PM me with a price if you have one.

Cheers

Anthony

[David Reid]

Hi David,

I'm after a s14a black leather drivers seat, can you PM me with a price if you have one.

Cheers

Anthony

Hello yes we have a few good ones to choose from 65 each


Best Regards

david

[tomo1]

Hello,

Im after a front "wheel hub bearing" as described in the nissan parts database- any ideas on cost, delivering to BA12
Also thanks for the previous bits delivered- all in good nick and timely arrival!
Cheers

[Razzario]

some oddities here guys, i need 2 flywheel bolts for an s13 manual and the clutch cover bolts... got anything on the workshop floor?

[Jeffers_S13]

Hello,

Im after a front "wheel hub bearing" as described in the nissan parts database- any ideas on cost, delivering to BA12
Also thanks for the previous bits delivered- all in good nick and timely arrival!
Cheers

Good to hear your other parts arrived safely :) we like to get feedback.

PM'd :)

James

[Jeffers_S13]

some oddities here guys, i need 2 flywheel bolts for an s13 manual and the clutch cover bolts... got anything on the workshop floor?

We've still yet to do an S13 Im afraid, so cant really help Im afraid, sorry.

[Stick23]

Hello yes we have a few good ones to choose from 65 each


Best Regards

david

Would it be possible to collect one & a seat belt buckle on thursday afternoon, about 4pm? Are you still based in Hinkley?

How much extra for the drivers seat belt buckle?

[Jeffers_S13]

Would it be possible to collect one & a seat belt buckle on thursday afternoon, about 4pm? Are you still based in Hinkley?

How much extra for the drivers seat belt buckle?

Good news : The buckle is part of the seat, so thats FREE ! yay !

Bad news : We have day jobs and arent at the unit during the day, however I work nearby and can be there at 5:30 if thats any use ? or at lunchtime ?

Cheers

James

[Stick23]

Thanks Jeffers, what time do you take lunch and I'll try and meet you there. I'll just have to run it by work.

Maybe a stupid question but I take it the seat still has the standard subframe on it? :)

[trialsgod]

david you have pm

[David Reid]

david you have pm

Pm sent

[trialsgod]

hi there, pm'ed ya back, i know you have read it hehe, sorry to be annoyin but i need the central lockin motor asap as im havin alarm installed on tuesday and want it all sorted for then
cheers

[cloudandy]

Hi again..

I'm looking for a S15-R Blue relay (Passanger side)?
could you PM me info please and price delivered.

thanks
andy

[Jeffers_S13]

Hi again..

I'm looking for a S15-R Blue relay (Passanger side)?
could you PM me info please and price delivered.

thanks
andy

PM'd

[vamp]

Had a crash recently, damage on the front passenger side of my S14A (RED), I m looking for the following parts,could you please let me know if you have them, and the price for both Collect / deliver (en8 9ls). many thanks. do you have a contact tel no. ? please e-mail me on v_vampire@hotmail.com

-front bumper with iron
-passenger side front wing
-passenger side headlight
-passenger side sidelight
-Bumper support bar

[trialsgod]

hi david, you didnt ring me about the central locking motor, sorry to be a pain but i really do need it asap
thanks
:sxoc:

[ady_mi16]

I belive thats all I need to fit one to my s14a.

pm with details

[FIGJAM]

Sill little request but do you have any of these:

Do you have the two circular parts that slip over the battery terminals as below (both + and - ones)????:thumbs:

http://img.photobucket.com/albums/v78/LoxyLoveMachine/200sx/SNC10373.jpg

[Jeffers_S13]

Sill little request but do you have any of these:

Do you have the two circular parts that slip over the battery terminals as below (both + and - ones)????:thumbs:


PM'd :)

[Bling]

hi mate, im after an abs sensor out the diff if you have one?
Dan

[David Reid]

hi mate, im after an abs sensor out the diff if you have one?
Dan

We have found these are impossible to remove without breaking. Both front and rear, but we can supply you a hub that includes them for £50 plus delivery

[Bling]

We have found these are impossible to remove without breaking. Both front and rear, but we can supply you a hub that includes them for £50 plus delivery

lol, that means i still have to get it out to fit in mine some how...ill have a think

[David Reid]

lol, that means i still have to get it out to fit in mine some how...ill have a think

I would suggest leaving yours in and changing the complete front hub

[Bling]

now thats so simple it could work...lol ill be in touch

[Brian Griffin]

I'm looking for an r33 front lower arm, drivers side - do you have any at the moment, and if so, how much delivered

many thanks :)

[Jeffers_S13]

I *think* we might have, will confirm.

[3NVY]

hi am after a r33 gtr handbrake handle or gts or woteva as long as they are the same as a r33 gtr want gaiter and handle for my 180sx am guessing its a straight fit, PM me plz :thumbs:

[Silvia Surfer]

Do you have any clear bumper indicators (kouki 96, 97 or 98) as in the picture 4 posts above? I want a pair.

[tokyo_rose]

hi after an s14a manual gearbox, mines a 1999. and postage costs to grimsby. thank you.

[tokyo_rose]

anything guys??? i'm desperate to my car back on the road asap??

[weiner_patrol]

Hi I am after an s14a passenger side, side light and main head light. If you can give me a PM with quotes for delivery to Edinburgh please.

[Jeffers_S13]

anything guys??? i'm desperate to my car back on the road asap??

Sorry, no manual gearboxes except 6spd but I think that is now sold, sorry we cant help.

[Jeffers_S13]

Hi I am after an s14a passenger side, side light and main head light. If you can give me a PM with quotes for delivery to Edinburgh please.

Sorry, they are very hard to get hold of, we dont have any Im afraid.

[TOK3R]

looking for a T28 in good condition

[Jeffers_S13]

PM'd :)

[PHIL C]

s14a front bumper splitter???

[Kneel]

Hi, I need CA18DET head gasket, valve guides, piston rings and possibly pistons... Could you PM me a price for these if they are available? Cheers

[donnylad]

hey im after a standard or lightened (not to light) flywheel, standard gearbox, drivers sidelight (the little clear corner1) cheers

please PM me.

[Jeffers_S13]

s14a front bumper splitter???

PM'd

[Jeffers_S13]

Hi, I need CA18DET head gasket, valve guides, piston rings and possibly pistons... Could you PM me a price for these if they are available? Cheers

PM'd

[Jeffers_S13]

hey im after a standard or lightened (not to light) flywheel, standard gearbox, drivers sidelight (the little clear corner1) cheers

please PM me.

Sorry, the only aftermarket clutch/flywheel we have is for an S15. If you want a standard wheel lightening I could get Chesman to do you one ? but it would be at least £130 for the machine work. Sorry no sidelights at the moment, we always struggle to get cars with intact front ends Im afraid.

[me]

Hi there, i am after the above for an s14a 2000 model.

Cheers

[me]

Hi there, i am after the above for an s14a 2000 model.

Cheers

also how much for windscreen washer bottle

Thanks

[michael]

hi guys

i need a complete head in good condition for a sr20, could you pm a price please

cheers

[m.d.]

hi, im looking for an RB20 gearbox bellhousing from a broken box, or complete working gearbox, im not sure if the CA clutch i have will fit the RB as yet but maybe you can answer that Q for me, if not then ill need a clutch too

also i need an ECU for the RB20DET, if you can help that would be ace :thumbs:

[michael]

hi guys

i need a complete head in good condition for a sr20, could you pm a price please

cheers

Just Bumping this Guys - Let me no if you have one - or could source one in good condiction:thumbs:

[David Reid]

Just Bumping this Guys - Let me no if you have one - or could source one in good condiction:thumbs:

Hello

Sorry to have ot replied sooner, I completely missed this.

We have just sold the last SR20 head we had, but I will let you know when we get another one in.

Best Regards

David

[michael]

No Worries David - If you could Let me no when you get one in that would be great.

[KPWares]

Hi,
I'm after some front end parts for a S14a.
Bonnet
Bumper with splitter
Drivers side headlight.

Thanks,

Keith.

[David Reid]

OK we have the following all s14a

We have green bonnet with minor corner damage which will need repainting, but is an easy repair for £40

We have a choice of 2 damaged bumpers, one is scratched the other has a 2 inch section missing that needs repairing. They are £30 each

Splitter we have one for £150

Drivers headlight we have a unit with damaged glass if thats any good

Let me know if you want to see pics

[rdnwlond]

hi, im after the black suround thats behind the headlight for an s14a,
cheers

[Evilchap]

Sorry, put my request in wrong place...

You people will probably know, what with taking them apart alot...

I am wanting to change my S14a diff to a helical jobby, and want long gear ratios...

Which skyline do I need to steal the diff from, or do you have any knocking around that are faster and better than standard 14a diff?

Thanks

Ben

[michael]

hi guys

i need a complete head in good condition for a sr20, could you pm a price please

cheers

Scrap that David. Gunna Just change the engine after all. Think i have about 800 to a 1000 to play with - What you got or can get?

[tomo1]

Hello,

I need a replacement carpet my my s14, can you pm me how easy it is to swap these over, I understand that seats, trims etc all have to come out, is there some trimming needed to fit it around the pedals dash area? Also I am after a really good condition one, do they come in different colours or all gray?
Thanks for your help guys.

Tom

[David Reid]

hi, im after the black suround thats behind the headlight for an s14a,
cheers

If you mean the clip in panel behind the headlight we should have a few

[David Reid]

Sorry, put my request in wrong place...

You people will probably know, what with taking them apart alot...

I am wanting to change my S14a diff to a helical jobby, and want long gear ratios...

Which skyline do I need to steal the diff from, or do you have any knocking around that are faster and better than standard 14a diff?

Thanks

Ben

I should know this, but I need to clarify at lunch time, we have one of everything though so should be able to help.

[David Reid]

Scrap that David. Gunna Just change the engine after all. Think i have about 800 to a 1000 to play with - What you got or can get?

We dont have anything at the moment but we should be able to get you a very good 60-80K engine for that. I'll pm when something becomes available

[David Reid]

Hello,

I need a replacement carpet my my s14, can you pm me how easy it is to swap these over, I understand that seats, trims etc all have to come out, is there some trimming needed to fit it around the pedals dash area? Also I am after a really good condition one, do they come in different colours or all gray?
Thanks for your help guys.

Tom

PM sent

[michael]

We dont have anything at the moment but we should be able to get you a very good 60-80K engine for that. I'll pm when something becomes available

Ok cheers. Any idea on time frame?

[rdnwlond]

If you mean the clip in panel behind the headlight we should have a few:


yes thats what i think ineed , its basically the headlight housing which holds the headlight to the car and the side indicators. ,, if this is right then let me know or pm me pictures of them just to make sure its what i want ,, cheers

[Longusta]

hi I'm after an air bag control unit for an s14 do u have any in stock and how much including postage? cheers

[Evilchap]

Have you had any luck figuring out which diff is which?

Thanks

Ben

[hellfire]

need a s15 lsd with shafts :thumbs:

[RohanC]

Hiya

Do you have any s13 headlights? I need the cage assy, both sides for an mot.

[David Reid]

Hiya

Do you have any s13 headlights? I need the cage assy, both sides for an mot.

Yes we do, is it just the cage unit you need to lights?

[rish13]

Hi mate,

I had a little ding last week so I am in need of a passenger front wing for a facelift S13, preferably in Dark Grey (Standard S13 Grey)

Please let me know if you have one including costs for postage to North London.

Cheers :)

rishigajjar@hotmail.co.uk

[RohanC]

Yeah, the bit that holds the headlight itself and pops up.

Kinda left this to the last minute... could really do with them for the weekend. Is that possible?

Oh, and how much!

Could also do with the drivers air vent (inbetween the door and instrument housing) and the centre air vent.

Ta

[Evilchap]

Any news on the list of Diffs, and which is which?

Also, you taken any nice 18s off anything recently? I have some 17s and need 18s for clearance reasons :)

Thanks

Ben

[KPWares]

Hi,

I'm after the front panel between the wings which runs behind the headlights.
It's the drivers side of it that I need if you have one?

Thanks,:thumbs:

Keith.

[Bexel100]

Hey,

I'm looking for front tie bar bushes for my imported s14. I'm not sure if these were different to the UK spec model as the garage I spoke to said they'd have to get the parts imported for ridiculous amounts of money and time.

Any help would be much appreciated, :)

Becky

[David Reid]

Hey,

I'm looking for front tie bar bushes for my imported s14. I'm not sure if these were different to the UK spec model as the garage I spoke to said they'd have to get the parts imported for ridiculous amounts of money and time.

Any help would be much appreciated, :)

Becky

Hello

They will be the same as UK cars. We can do you a pair of arms with standard bushes used for £25 each, or we have a pair for £60 which have uprated whiteline bushes fitted. It should be a 15-20 minute job for your garage to fit.

[Bexel100]

Would there be much advantage in the more expensive ones? (broke student but willing to pay if it's worth it, heh).

Also how much would postage to Bristol be?

[David Reid]

Would there be much advantage in the more expensive ones? (broke student but willing to pay if it's worth it, heh).

Also how much would postage to Bristol be?

They are stiffer and the car may feel a bit sportier, tighter and more accurate. Postage is £10

[Bexel100]

That's great, I'd like the pair for £60 then please. :D

[David Reid]

That's great, I'd like the pair for £60 then please. :D

PM sent

[TheChin]

I've sent you a PM david.

I'm looking for an engine, cheap as chips to play around with with my new engine stand. Nothing fancy, just need the bare block and head, will add parts if it's a successful rebuild. If have anything, let me know.

[bozzeye]

hi there, was wondering if you had any pre facelift brakes knocking around, im after discs and pads all round mine have seen better days, just remembered i need a new boot lid aswell if you have any. mine ready to fall apart

[RohanC]

Yeah, the bit that holds the headlight itself and pops up.

Kinda left this to the last minute... could really do with them for the weekend. Is that possible?

Oh, and how much!

Could also do with the drivers air vent (inbetween the door and instrument housing) and the centre air vent.

Ta

You seem to have missed my post :)

[MARK H]

do you have any 13/14/14a front end parts , if so what do you have .

[mutley]

Hi - I'm after a pair of S14/a front calipers - do you have any and what condition are they in?

Cheers,

[David Reid]

Hi - I'm after a pair of S14/a front calipers - do you have any and what condition are they in?

Cheers,

Hello

Yes we do, they are £50 or £90 a pair plus £20 postage, the ones from our s15 which are the same I think have done 45K are available. PayPal is fine

[David Reid]

hi I'm after an air bag control unit for an s14 do u have any in stock and how much including postage? cheers

Hello

Yes we do £35 including postage

PM if you want one

[David Reid]

do you have any 13/14/14a front end parts , if so what do you have .

Sorry at the moment we have sold everything, apart from S14 and 14a bumpers & splitters.

[David Reid]

Have you had any luck figuring out which diff is which?

Thanks

Ben

Yes here we go:-

These are all R200 rear ends so the pinion and shaft will fit in a s14 casing or you can use the corresponding driveshafts and prop to suit

R34 GTR 3.545:1
R33 GTR 4.11:1
R33 GTS Manual 4.11:1
R33 GTS Auto 4.3:1
S13 Auto & Manual 3.916:1
S13 (Import 180sx) 4.11:1
S14 Auto 3.916:1
S14 Manual 3.6:1
S15 Type R 3.6:1

Hope this helps, but to answer your original question the s14 manual will give you the highest top speed, but slowest acceleration

[David Reid]

need a s15 lsd with shafts :thumbs:

If you are buying a complete diff unit i.e with casing you dont need the drive shafts as the flanges are the same as 14/14a. But if you are buying just the diff unit you need the diff input shafts.

We dont have either at the moment but I hope that helps

[Jackiefan]

Hi,

I need a pair of S13 open diff output shafts. Can you help?

[Morzy]

Hi,

Do you have a drivers side electric window amplifier for an S14?

Cheers :thumbs:

James

[Jeffers_S13]

Hi,

I need a pair of S13 open diff output shafts. Can you help?

Only S13 diff we have is welded however I think S14 output shafts are the same, we can supply a pair of those.

[Jeffers_S13]

Hi,

Do you have a drivers side electric window amplifier for an S14?

Cheers :thumbs:

James

Yes probably :wack: is it located in the door ?

[Jackiefan]

Only S13 diff we have is welded however I think S14 output shafts are the same, we can supply a pair of those.

How much delivered?

[RohanC]

Yeah, the bit that holds the headlight itself and pops up.

Kinda left this to the last minute... could really do with them for the weekend. Is that possible?

Oh, and how much!

Could also do with the drivers air vent (inbetween the door and instrument housing) and the centre air vent.

Ta


You seem to have missed my post :)

HELLO. I WOULD LIKE TO BUY THINGS YOU PREV SAID YOU HAD, CAN YOU QUOTE PRICES AND P&P AND AN ETA AS MY CAR IS OFF THE ROAD TIL THIS IS SORTED. THANK YOU

[Hel1x]

no needs for caps lol :P

[Morzy]

Yes probably :wack: is it located in the door ?

Yeah mate, its a white box that is connected to the motor - its the most common cause of your window stopping working which is what has happened to mine:(

If you can't locate it, can you give me a price on a whole electric window mechanism including motor etc? and switches.

Thanks :)

EDIT - got a link to show you what part i mean

http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CP&Product_Code=28515-S14AMP

[cloudandy]

any pics of the 18 inch kosei wheels you have?

[David Reid]

HELLO. I WOULD LIKE TO BUY THINGS YOU PREV SAID YOU HAD, CAN YOU QUOTE PRICES AND P&P AND AN ETA AS MY CAR IS OFF THE ROAD TIL THIS IS SORTED. THANK YOU

Sorry, PM is the best way to get my attention, but I didn't miss that.
£50 for both units complete with lights & £20 P&P Paypal is fine for payments

[David Reid]

How much delivered?

Well I think there the same becuase you can bolt a s14 diff into a s13 therefore s13 will go into S14/15, it just needs the backing plate changed.
PM me an address and will sort a P&P quote for you.

[David Reid]

Yeah mate, its a white box that is connected to the motor - its the most common cause of your window stopping working which is what has happened to mine:(

If you can't locate it, can you give me a price on a whole electric window mechanism including motor etc? and switches.

Thanks :)

EDIT - got a link to show you what part i mean

http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CP&Product_Code=28515-S14AMP

Has Jeffers sorted this for you?

[David Reid]

any pics of the 18 inch kosei wheels you have?

Yes do you have an email address I can send them to?

[Shortcut]

i need a pair of these?
http://i98.photobucket.com/albums/l256/200sxturbo/sus.jpg

[FullMetalGasket]

Here's an odd one :D
I'm after a towbar for my S13 - Preferably a removable jobbie ( Nissan's own P/N for these is KE50044F10 if that's any help at all :thumbs: ) Don't know the No. for the fixed version.
They arn't manufactured or sold in the UK anymore so am basically trying wherever I can - If you're able to source from abroad then that is also fine dependent on price :)

Thx.

[s13ben]

Hi guys, after a driver's side wing for an s13. dark grey would be good but as long as it's straight I am not that fussy. cheers. ben

Hello

No straight S13 wings at the mo Im afraid.

[Morzy]

Has Jeffers sorted this for you?


Not yet mate

[panadol]

Hi Guy,

I'm looking for a motor starter for a 1995 200sx S14. Engine code SR20DET. Mine died last Saturday and I'm in need of on ASAP.

I live in Malta, not Uk, so do you think it will be possible to ship one over?

Thanks.

Matt

[Evilchap]

Got an R34 GTT diffs?

Thanks

Ben

[Jeffers_S13]

i need a pair of these?

Theres a few things in that pic, are you after the subframe brace things that the tie bars bolt to ?

[Jeffers_S13]

Here's an odd one :D
I'm after a towbar for my S13 - Preferably a removable jobbie ( Nissan's own P/N for these is KE50044F10 if that's any help at all :thumbs: ) Don't know the No. for the fixed version.
They arn't manufactured or sold in the UK anymore so am basically trying wherever I can - If you're able to source from abroad then that is also fine dependent on price :)

Thx.

If we ever get one in with one I will probably remember you are after one as it is quite an unusual request.

[Jeffers_S13]

Not yet mate

I did actually go to sort it out the other night when were there, but typically the fisrt drivers door I could see was behind about 4 passenger doors...so I started to clear space to drag them all out but I must have got distracted ! I will try and do this tomorrow now the units all nice and tidy again :)

[Jeffers_S13]

Got an R34 GTT diffs?

Thanks

Ben

Sorry no GTT diffs, we only have an R33 GTS diff and couple of S14 diffs at the mo.

[stueywalls1]

I am after a s13 red drivers side wing and a passenger side door if you have them please. Bit of a long shot too but a 180sx red rear bumper....

Thanks stu

[Jeffers_S13]

I am after a s13 red drivers side wing and a passenger side door if you have them please. Bit of a long shot too but a 180sx red rear bumper....

Thanks stu

Sorry, we have none of the above :(

[S3 1MDl]

any chance of a single clutch plate bolt and washer asap

[FullMetalGasket]

If we ever get one in with one I will probably remember you are after one as it is quite an unusual request.

Tell me about it :wack:
It's for towing the westfield before anyone accusses me of hankering for a caravan ;)

Cheers :thumbs:

Edit, I notice you have a couple of S14 diffs - Roughly how much are we talking as I'm considering fitting one :)

[S3 1MDl]

any chance of a single clutch plate bolt and washer asap

bump

[Jeffers_S13]

Is the bolt for a 14 or 13 ?

[Jeffers_S13]

Tell me about it :wack:
It's for towing the westfield before anyone accusses me of hankering for a caravan ;)

Cheers :thumbs:

Edit, I notice you have a couple of S14 diffs - Roughly how much are we talking as I'm considering fitting one :)

OK ! but you could tow a caravan....if you ever wanted to.:smash:

Standard manual 14 diffs are £100, autos are £150.

[CHIEF]

Hi,
I'm after some standard hosing for the recirc valve system.

[base-1]

I need a pair of facelift S13 front wings, don't suppose you have any? :)

[michael]

Hi guys, i need the little plastic lever thing on the side of the seat (for the back rest movement) for the passenger seat.

[S3 1MDl]

Is the bolt for a 14 or 13 ?

14 - if by anychance you can bring it along to the hinckley knight later i'd appreciate that

[tokyo_rose]

saphire blue s14a passenger door handle please?

[CHIEF]

Both pipes from the OEM recirc/DV. Thank you.

[sprout]

Drivers door switch (the switch that turns the cabin light on and the headlight beep etc) just switch needed not loom. cheers :thumbs:

[Magic]

Alrite boyz!

I m lookin for the breather pipe the one at the turbo side on the far back corner of the engine.Any chances you got one?rather urgent cuz the old one melt a bit.

Cheers

[Nismo Pete]

Hi there i am after a front splitter and a passenger headlight both for a S14
have you any in

[paullen]

Can I have a price for a full Z32/skyline rear brake set up, minus the calipers and discs please. Its for an S14a.

Cheers

[David Reid]

Hi,
I'm after some standard hosing for the recirc valve system.

We have it all in stock, PM me to let me know which bit you need

[David Reid]

Hi guys, i need the little plastic lever thing on the side of the seat (for the back rest movement) for the passenger seat.

£12.50 delivered PM me if you want it

[David Reid]

saphire blue s14a passenger door handle please?

Hello

Yes £17.50 delivered

[David Reid]

Drivers door switch (the switch that turns the cabin light on and the headlight beep etc) just switch needed not loom. cheers :thumbs:

Not sure which one you mean, can you PM me the location of the switch? I am assuming s14a?

[David Reid]

Alrite boyz!

I m lookin for the breather pipe the one at the turbo side on the far back corner of the engine.Any chances you got one?rather urgent cuz the old one melt a bit.

Cheers

Hello

Sorry we have supplied these with the engine people have bought. Sorry

[David Reid]

Hi there i am after a front splitter and a passenger headlight both for a S14
have you any in

PM me s14 or s14a, I think we can help with both but prices are different

[MARK H]

hi . im after a s14a passenger wing, have u got any

[velocity]

hi mate i need an s14 offside headlight and sidelight

[Magic]

Turbo elbow for s14,short one without the cat by any chance?

[Streetmekanik]

Is this something that you come across? Is it more likely with upprated aftermarket alternatives on S14s? Price on all four corners, without any shipping?

There must be quite a few broken 350Zs out there.

Thanks.

[Scottie]

I have a 99 S14a with the cloth front seats from a S15 Spec R Aero, looks like the ones in your dark silver/grey car.

Can you supply matching rear seats for this?

Thanks,
Scott.

[Kieran_e1]

any bare sr blocks in need of a rebuild going spare.

don't need a crank or any ancillaries just the block with all the end cap's and sump

[David Reid]

Is this something that you come across? Is it more likely with upprated aftermarket alternatives on S14s? Price on all four corners, without any shipping?

There must be quite a few broken 350Zs out there.

Thanks.

We have R33 GTR which is the same all four corners including handbrake set up for £850. Can do R34GTR Gold front calipers if you want them instead

[Streetmekanik]

We have R33 GTR which is the same all four corners including handbrake set up for £850. Can do R34GTR Gold front calipers if you want them instead

Wow. How much more for the gold R34s?


Belay this request:
Also I am looking for a S15 spec R master clutch cylinder, do you have any knocking about?
Belay this request

[fry]

s15 bonnet hinges

[Kieran_e1]

any bare sr blocks in need of a rebuild going spare.

don't need a crank or any ancillaries just the block with all the end cap's and sump

bump

[Jeffers_S13]

bump

Sorry, not at the mo, we sold the last one just last weekend Im afraid.

[David Reid]

Wow. How much more for the gold R34s?


Belay this request:
Also I am looking for a S15 spec R master clutch cylinder, do you have any knocking about?
Belay this request

PM sent

[Rich_M]

i need a pair of rear s14 callipers with working pistons, sliders and bleed nipples.
How much posted to bristol?
Thanks,
Rich.

(sorry for the other thread in the wrong section).

[Scottie]

I have a 99 S14a with the cloth front seats from a S15 Spec R Aero, looks like the ones in your dark silver/grey car.

Can you supply matching rear seats for this?

Thanks,
Scott.

Just checking if you can supply these or not.

Thanks.

[cloudandy]

im looking for a good condition t28 turbo, asap.

thanks
andy

[Rich_M]

i need a pair of rear s14 callipers with working pistons, sliders and bleed nipples.
How much posted to bristol?
Thanks,
Rich.

(sorry for the other thread in the wrong section).

really need to get moving on this as im away for a week from sunday and want the callipers to be with me when i get back so i can get my car back on the road.
Cheers,
Rich.