Part Requests

[sparkySX]

Hi

Do you have any S15 headlights?

[Jeffers_S13]

Here's ya nudge ;) Any news guys?

Blimey, been a while since I've been on here. We won the GTST, if there is interest in the engine then I will let you know about the gearbox, ideally we want to sell as a package.

[Jeffers_S13]

can you supply/ do you have a full set of very good condition coil packs for a s13 CA18DET? as i think mine are not too great at the moment.

also would like a s14 auto, gearbox cooler.

thanks

Hello

We dont have any CA coilpacks Im afraid, we might have an auto box cooler though.

[Jeffers_S13]

hi all

do you have a good condition ignition amplifier in stock for my 1999 sr20det s14a

and how much?

regards mark

PM'd

[Jeffers_S13]

Do you have any S14 ball joints.

I know someone who is needing the following

nearside track rod end ball joint
offside lower suspension arm with ball joint

Hello

We do have ball joints yes, I think they are £5. Not sure about front arms, I will need to check at the unit.

James

[sparkySX]

Bump for the headlights ^^^ top of page :)

[MapBoy]

Hey guys.
I'm needing the pipe that feeds oil for power steering from an s13 (will be going on an import rps13, so am hoping its the same)
I have one rubbish pic of what I mean. I'll get better ones if you might have it.

http://i272.photobucket.com/albums/jj166/JRGTHM/DSC00118highlighted.jpg
Cheers
Jamie

[Fordie]

looking for s14a o/s rear hub with good bearing wondering a price inc delivery to po229es many thanks:thumbs:

[S14aDave]

Do you have any S14a rear lower arms with ball joints, and the nuts for the ball joints?

[richy200]

Really want the drivers side rear quarter window and rubber for a s15. Have posted and sent a few pm's but no replies

thanks :)

[Jeffers_S13]

Bump for the headlights ^^^ top of page :)

Sorry, thought Id replied to this, we have one damaged one Im afraid, there are some pics somewhere in the S15 thread.

[Jeffers_S13]

Hey guys.
I'm needing the pipe that feeds oil for power steering from an s13 (will be going on an import rps13, so am hoping its the same)
I have one rubbish pic of what I mean. I'll get better ones if you might have it.

http://i272.photobucket.com/albums/jj166/JRGTHM/DSC00118highlighted.jpg
Cheers
Jamie

Sorry, I dont think we can help with this.

[Jeffers_S13]

looking for s14a o/s rear hub with good bearing wondering a price inc delivery to po229es many thanks:thumbs:

PM'd :)

[Jeffers_S13]

Do you have any S14a rear lower arms with ball joints, and the nuts for the ball joints?

PM'd :)

[Jeffers_S13]

Really want the drivers side rear quarter window and rubber for a s15. Have posted and sent a few pm's but no replies

thanks :)

Hello

I will see if we have one in the rack at the unit tonight :)

[richy200]

cheers mate, can you let me know a price aswell

thanks

[WideboyS14]

mkiv supra injectors 550cc??

[sultennok]

Hi. I need an igniter ( little black square box on L/H front strut tower ) For an 180SX SR20DET . I really dont know if its the same for S14´s ? if you got one, could i get it with plugs and 10cm og wiring on both sides? ( mines melted the igniter and plugs. )
ill send you a PM reg. this too, as im not here that much.

Thanks
Jacob

[adsmithy]

S14a Rev Counter unit?

[DaV]

A CA lambda sensor? :)

cheers,

Dave

[JCD]

Still looking for a CA18DET dead crankshaft :nod:
http://www.sxoc.co.uk/vbb/showthread.php?t=374433

[Irishpaddy]

i put this in the main page by misyake sowwy...:o

any of the above in stock?

[Jeffers_S13]

mkiv supra injectors 550cc??

Sorry, we havent broken any Supras, if you PM Dave directly he might have some.

[Jeffers_S13]

A CA lambda sensor? :)

cheers,

Dave

Hello

We can supply a lambda from a 14a, you might have to fiddle around with the wiring though to fit the 13.

[Jeffers_S13]

Still looking for a CA18DET dead crankshaft :nod:
http://www.sxoc.co.uk/vbb/showthread.php?t=374433

Sorry, still dont have any Im afraid.

[Jeffers_S13]

i put this in the main page by misyake sowwy...:o

any of the above in stock?

Hello

We have a set, they were on ebay, btu I think they are now sold. We have complete S13 rear hubs if they are any use to you ? with handbrake cables, 150 for both sides. Ideally collection but I can post, will be £££ though.

[Carta]

any 180sx ECUs?
ECU Not needed, but I do need the crank angle sensor if you have one!

[Jeffers_S13]

any 180sx ECUs?
ECU Not needed, but I do need the crank angle sensor if you have one!

Sorry, we havent broken a 180 yet.

[Carta]

Was gonna offer you mine but I fixed it!

[Jeffers_S13]

Was gonna offer you mine but I fixed it!

Heh, you cant break yours, its mint !

[clivehot200sx]

hi

would you by any chance havea pair off wiper arms

and a interior light for a s13

cheers clive :sxoc:

[colm]

Would you have any z32 rear brake conversion bits in stock?

In need of,
Calipers and backplates with handbrake bits and r33 gtst handbrake cables

[StarletRick]

im lookingf for an S15 bonnet, preferably in white if you have one!

[Si-PS13]

Hi

Do you still have any of those S14a lambda sensors?

Thanks

Si.

[mark_clio2]

Hi am looking for s14 silvia boot seal and plastic trim plate, it has the hole for where boot lock stricker is, thanks

[Petu_S]

Hi,

Do you have these available for S14/a

5-lug hubs F+R
Transmission support bar x2
PTU unit x2
PTU unit connectors with little bit loom
Alternator with all brackets
Alternator adjustment bracket
Power steering pump with bracket

And can you ship to Finland?

PM reply :)

[ajbh]

S13 fuel tank,straps,top cover the pipes connect to ?? pm reply if poss please. cheers alex

[jim200sx]

do you have a complete or bare head for a s14 200sx?

[Si]

Hey guys,
I'm after the caliper mounting bracket for a rear S14 brake setup - the U shaped one. Have you got any lying about?
Ta!
Si

[Jeffers_S13]

hi

would you by any chance havea pair off wiper arms

and a interior light for a s13

cheers clive :sxoc:

Sorry no we dont.

[Jeffers_S13]

Would you have any z32 rear brake conversion bits in stock?

In need of,
Calipers and backplates with handbrake bits and r33 gtst handbrake cables

No Z32 bits, we have S13 parts for this ?

[Jeffers_S13]

im lookingf for an S15 bonnet, preferably in white if you have one!

Sorry, both 15's we have done were front ended :(

[Jeffers_S13]

Hi

Do you still have any of those S14a lambda sensors?

Thanks

Si.

Yes, PM'd

[Jeffers_S13]

Hi am looking for s14 silvia boot seal and plastic trim plate, it has the hole for where boot lock stricker is, thanks

Yes, PM'd

[Jeffers_S13]

do you have a complete or bare head for a s14 200sx?

Sorry, no S14 heads just a couple of blocks.

[Jeffers_S13]

Hey guys,
I'm after the caliper mounting bracket for a rear S14 brake setup - the U shaped one. Have you got any lying about?
Ta!
Si

Cant picture the part you mean, but we just go an S14 in, so we have probably got this part.

[Si]

On the stock S14 rear brake setup the caliper bolts to a bracket which the slider pins are part of, that bracket then bolts to the hub.

The pads slide onto either side of the bracket I'm after, the caliper then goes over the top and mounts to the bracket.

Does that help?

I'm osrt of in need ASAP, as my car's off the road due to stupid cheese bolts from Nissans :(

[minwaash]

helloo :wave:

do you have floor carpet for a s14a?? if so how much?

cheers ash

[daniel83]

Air vents for an S15?

[Denmark]

L+R Output shaft for a S13 VSLD.

i think it´s the same on the s14 also, needed to mount a s14 kaaz in a open s13 case


/Skassa

[ebonic]

Hiya.

Just snapped a rocker cover bolt on my 14a. Only need the one but will have a set or what ever to make it worth your while. Also after the bonnet prop gromet. Thanks in advance.

[bealehere]

Hi, Do you have any S13 rear internal quater panel covers?

Rich :thumbs:

[dazz150]

have you got a s14 dash? just the dash, no speedo cluster and no passanger air bag recess :)

[JonoDT]

Hi,

I am after a s13 tailgate less rust ( I know this is a way long shot!) and some hoses for a saab fmi conversion, or i saw a while back you had a volvo fmi and pipes, is this gone?

[Nero]

Hello :)
Do you have any CA18DET engine?

Thank You

[Steve-O]

Don't suppose you have a Mint Sapphire Blue rear bumper for s14a? :D

Steve

[rich1988]

after a standard S15 wing mounted intercooler

[SuperMonkeyKong]

Hi

Do you have a set of R33 handbrake cables available?

Cheers

[Robbhp]

as per http://www.sxoc.com/vbb/showthread.php?t=409731

From the PAS pump there are two copper banjos and the nut ( not the bolt) that holds the high pressure line in place. if i could have the posted price on these that would be very helpful. also how do you take payment.

i need
2*of the coppoer bajos
1*fitting Nut (what holds the PAS line on to the PAS pump)

Many thanks ROB.

[MASH]

Price and availability for a Front Passenger side wheel hub assembly for a S14a please. Will probably pick it up so delivery price not required.

[Matt]

have you got/can you get the s15 headlight brackets, the 'L' shaped ones towards the center of the car. if so how much??

[BlahLackage]

Do you have a working coil pack for S14a??

[FullMetalGasket]

Have you got any good front z32 brake calipers? :)


Don't worry, sorted now :thumbs:

[sx boy]

hi guys , do you have an s14a front offside ,front wheelarch liner with the clips please ? if so how much ?

[bluejew]

Hi there,

Can you PM me with a price for a T28 turbo please? Cheaper the better!! :)

Thanks

[Treekiller]

Have you got any knackered s14 engines that might have a set of cam guides in them?? let me know asap am desperate..lol :eek:

[ross86]

hi guys i require a slam panel for an s13 in good condition or if not any ideas where i can find a pattern part new from somewhere

thanks ross

[livi-s14]

looking for power steering pump for s14. cheers

[Firefoot]

Hi there

I am looking for an exhaust support outlet, the bracket that bolts to the bottom of the turbo and the front of the gearbox housing. It takes the weight off the exhaust where it meets the turbo.
Car is S14a

Cheers
Debbie

[Actual_Ben_Taylor]

Good condition S14 rear half of prop with center bearing please.

Cheers,

Ben

[gerry]

Hi
hope you can help have you in stock, drivers side front caliper for s14a.
many thanks Gerry

[SxSmeebo]

looking for a re-conditioned ca18det head with cams and tappets if possible

[Simmo14a]

hi

the alternator adjustor bolt has sheared do you have any? or know of anyone who would?!

Thanks

lee

[Petu_S]

Hi,

Do you have these available for S14

5-lug hubs front and rear
Transmission support bar
Alternator with all brackets
Alternator adjustment bracket
Power steering pump with bracket

And can you ship to Finland?


Still haven't got any answer for these...

[Sideways Simon]

Hows it goin... im looking for a standard crank pulley off a s14a sr20det

[barryjdart]

Have you got an S13 Automatic Transmission Controller? The computer unit. I just need the two sockets that the harnesses connect/plug into.

[Jeffers_S13]

Still haven't got any answer for these...

Sorry we dont have any hubs, or transmission support bar. We can do all the other stuff though.

[200jim]

hi have you got 3 centre vents for s15? really need them

[nico180sx]

hello, I am a research rb25det Oil Filter Bracket
you can have her?

thank you

nico


ps: Sorry for my English, I am france

http://i84.servimg.com/u/f84/11/14/83/14/suppor10.jpg (http://www.servimg.com/image_preview.php?i=756&u=11148314)

[spice_weazle]

Hi,

Im looking for a s14/a bare shell for restoration and reshell of my current car. I dont want any running gear, no front wings, no bonnet, no doors and no boot. Can you do bare shells? If so what sort of price do you do them?

Rich.

[Sideways Simon]

I have sent numerous pm's....... i really need a crank pulley fast

[Rubix_Cube]

Do you guys get many non VVT SR20DET engines?

[t51rjohn]

David & Jeffers could you get me a price for the following?

- Boost Pressure Sensor
- Ignitor Chip
- Consult wiring ( the plug in the interior of the car)
- all of the water pipes for under the plenum

this is all for the s14 engine and ecu that you supplied me.

Thanks John

[ADAMB]

Hi, looking for 14a headlights with brackets + lenses intact please. Also spiral cable (behind steering wheel).
Thanks

[ADAMB]

double post,:rolleyes:

[Ewen]

Hi,

Would you have a (preferably nice and clean) diff cover plate for a non-oil-cooled S13 diff? I could do with the 4 studs and their nuts being included.

How much would it be?

Also, Would you have the two plastic covers which go under the windscreen / cover the scuttle? I broke mine trying to haul them off.

Cheers

[MiNos]

ca18det engine, block and head only, shipped to denmark? how much would that set me back, please reply in PM or email pps@it.dk cheers

[S13 EATER]

looking for a rb25t starter motor, how much cheers.

[repset247]

Hi all, would you have a good inlet cam shaft for a 1996 s14?
Thanks

[PecaSX]

CAS for CA18DET anyone?

[SidewaysThough]

I dont suppose you guys have, or could get an RB25DET gearbox and propshaft at all?

[Gary_s13]

Any chance you guys have, or couold get, a PAS pump for an s13?

If so how much delivered?

Ta.

[Ranster]

Looking for the original T28 S14 turbo.
condition is not relevant because i need the turbo exhaust side housing only (of course as long it is not cracked)

pls PM me!

Cheers,
Ren

[CYNIC]

Hi,
Do you have any front tension rods and bushes for a 1993 S13.
I need both sides.
Car is in original spec.
Regards,
Cynic.

[John Bennett]

Hi gents,
I'm looking for a PAS pump bracket from an SR20DET 180sx if you happen to have any lying around :wack:
Cheers :)

[crouchy]

hey there, im looking for the plastic surround which goes around the s14a clarion stereo so that you cant see the cage etc, its a think gasket type thing which pops out the front when you take out the stereo. hope you understand what im after lol thanks lewis

[aidstap]

i'm looking for a drivers side door handle in emerald green please for an S14a :thumbs:

[Grim]

do you have a gearbox/exhaust rubber block and bracket?

http://nissan4u.com/parts/200sx/el_s14/1996_2/type_1/exhaust_and_cooling/exhaust_tube_and_muffler/

items 12 and 14 in the link - for an S14a

[Lou-Lou]

After a fuel gauge sender (unit?).. for a 94 s14.

[kieran]

hi, need a nsf lower arm for s14 thanks!

[barryjdart]

S13 rear subframe? Please.

[joshm8991]

do u have a s14 gearbox used but not broken? thanks josh:thumbs:

[Lynny]

Hi

Do you have a splitfire coilpack for a 1999 s15?

[s13rich]

Hi, I am looking for standard intercooler pipework from an r33 gtst. Also the pipe from AFM to the turbo. Oh and do you have any good condition standard RB25 turbos available?What sort of prices would these parts be?

Many thanks, Richard

[daniel_johno]

Hi, I am in need of a front drivers side hub for a 1999 s14a. How much would this be posted to aberdeen please.

Thanks

Daniel

[ben-chelt]

hey there, im fairly new to the site.
im looking for the oil feed pipe from the bloke to the top of the turbo for a s14.
i dont mind if its standard or braided as i just need one.
many thanks ben

[Sideways Simon]

Looking for a pair of s15 spec r headlights ...???

[Gearboxmurderer]

hello mate im after prices for

5 stud conversion for s13

S13 rear lights (3peices)

S14 front calipers

S13 pedal box

[chall]

S13 brake master cylinder. Must have 3 pipe unions.

how much inc delivery?

[rocket]

looking or a complete loom from a s13 , interior , engine ,fuse box ,relay box etc..

[Luchitoxr4]

Hello i'm looking for the ca18det Exhaust Cam "used" in good condition, any one sell it ???
Because some friend in U.k can buy it for me, Thanks and salute !

Luchito

[s200rat]

black top sr20det crank pulley, no chips/dents?

Thanks

[crouchy]

hey do you have a pair of front abs sensors for an s14a?

cheers lewis

[paulsilv]

Hello there, looking for an S13 Manifold to Turbo Gasket and Turbo to Elbow gasket if you stock them.

Kind regards

[Phil R]

Hiya. Do you have the front caliper carriers for an S13a please? I'm looking to fit 280mm discs to my S13 but keeping the same calipers.

Thanks, Phil

[Lex Shanks]

S14 rear subframe. Pm me please.

Lex

[stueywalls1]

Could I get a price on Z32/sykline brakes for the rear on my s14 please. I need everything apart from discs and pads.

Thanks stu

[ViPeRjAcK]

Hi,

Looking for a s14a bonnet...
Do you have any?
How much shipped to Portugal?

Thz :thumbs:

[crouchy]

hey do you have a pair of front abs sensors for an s14a?

cheers lewis

Anyone? please pm me need these asap :cry:

[neil c]

hey guys any chance of a price on an s14 front bumper, rear subframe, both lh and rh front tension rod braces and a front crossmember? cheers

neil

[lukes13]

Hello mate wonder if you can help im in need of a pair of s13 pre facelift wings if they any different,do you have any?if so how much please cheers luke

[ep1centre]

hi ya guys,

I suspect i bent something when i had my "meeting with the curb" because at the time the only thing aparently damaged was the bearing and after replacing it it collapsed again in 8 months and just under 10k miles on it....

Anyway i'm after all the bits to completely change the passenger side (Near Side?) rear wheel assembly ie, hub itself lower arm the 2 (is it 2?) upper arms and the drive shaft no need for caliper or disk!

Do you have the bits and how much delivered to Bristol area?

Ahh all those for an S14a :D

Cheers

Luis.

[MattyGee]

Heya Dave and Jeffers :wave:

I dont suppose you have a good condition SR20DET Crank Pulley do you ?

Ive managed to chip mine removing it and am worried it will be out of balance so need a no-damaged one to replace it with :)

Thanks guys :thumbs:

[sil80shwa]

hi chaps, im after a 5 stud hub conversion for s13 minus the lower arms please.

[Noodles]

in desperate need for a towbar for a 96 s14..... please please please help!

[Cluck]

.

[200sxireland]

Hi Lads,

looking for the drivers seat belt and a resister card for the heater blower.

Do you have any apex uprated control arms for front and back?

Cheers,
Barry in Wexford:thumbs:

[sx boy]

Hi guys 'do you have the rubber fuel hose that goes from the top of the fuel filter to the fuel pipe under the inlet plenum as mines starting to crack and split ,must be in good condition .i've tried nissan but they don't supply them anymore .:(

thanks

[reco2k]

Hi,

Do you have a heat exchange/oil cooler for an SR20? Image below

http://i307.photobucket.com/albums/nn294/recoy2k/oil20cooler.jpg

Thanks