Engine conversions SR20DET RB25DET ect

[David Reid]

We have now supplied many kits of parts for engine conversions, we have supplied 4 SR20 conversions and 2 RB25DET conversions so far:-

SR20DET Conversion to suit s13 or Skyline includes:-

Complete engine, turbo and ancillaries
Clutch flywheel
manual Gearbox
Front prop shaft
Engine mounts
Wiring loom with body side connectors
ECU
Ignition amplifier coil packs AFM ect
Clutch slave cylinder and pipe work
Down pipe
Basically everything you need to swap an SR20DET into a 200sx or other car

Price start at 1400 we can engines to match your requirement so please contact us

RB25DET Conversion to suit s13 or Skyline includes:-

Complete engine, turbo and ancillaries
Clutch flywheel
manual Gearbox
Front propshaft
Cross member
Engine mounts
Wiring loom with body side connectors
ECU
Ignition amplifier coil packs AFM ect
Clutch slave cylinder and pipe work
Down pipe
Basically everything you need to swap an RB25det into a 200sx or other car

Price start at 1600 we can source engines to match your requirement so please contact us

RB26DETT Conversion to suit s13 or Skyline includes:-

Complete engine, twin turbos and ancillaries
Clutch flywheel
Engine mounts
Wiring loom with body side connectors
ECU
Ignition amplifier coil packs AFM ect
Clutch slave cylinder and pipe work
Down pipe
To complete the swap you will need an Rb25det gearbox, slave cylinder and prop shaft we may be able to help with these at the time.

An Rb26dett with a free flowing exhaust and filters and running 1 bar (limit of the standard turbo) can provide approx 400 bhp. With up to 600 bhp possible on the standard internals with the addition of head gasket, cams, injectors and suitable engine management.

Prices start at 2600 we can source engines to match your requirement so please contact us

Note:- All of the above can be heard running and compression tested prior to committing to buy.

[Magic]

Will that rb25det conversion fit s14 as well?You supply the parts only or can you do the job as well.

cheers

[David Reid]

Will that rb25det conversion fit s14 as well?You supply the parts only or can you do the job as well.

cheers


It will fit the s/13/s14/s14a. We will be offering fitting in future but currently we dont have enough room. We have arriving on Monday a 40K R33 that has an Rb25det

[adrianstokes]

Yes the RB25DET will fit the S14, though I didn't use the crossmember or factory engine mounts. It seemed much easier just to use custom engine mounts.

[adrianstokes]

Err, David, I think you'll find that I have dibs on that engine ;). Ask James :nod:.

[David Reid]

Err, David, I think you'll find that I have dibs on that engine ;). Ask James :nod:.

PM sent

[chrisdsx]

i would be interested in the rb 25det convertion for a s13 90 can u pm me details

[Jeffers_S13]

i would be interested in the rb 25det convertion for a s13 90 can u pm me details

PM'd :)

[sxben]

Hi there could you pm me details on this conversion to include everything and rough time thanks. Ben

[compton--jay]

anyone got a price on fitting a rb25det in a s14 silvia??

[Chris]

You may want to check your typing :nod: :p

[Jeffers_S13]

anyone got a price on fitting a rb25det in a s14 silvia??

PM'd :)

[iain2010]

Hi,

Im interested in the SR20DET Conversion. I have a 1996 auto S14a NA :ghey:

Could you please email with what you have in stock at the moment and some prices. It would be for the whole conversion inc manual gearbox.

Cheers
Iain

[nick_NI]

Hi guys

Big ends are starting to go on my ca18det.

Could you give me a price for another sound ca18det

Also a price for a complete sr20det upgrade including a t28.

Can you guys do the swap or just supply the parts?

Thanks! :thumbs:

Edit to say - Really urgent!! Thanks!

[DeJi]

I'm interrested in an RB25DET conversion for my s13. Do you have anything in stock and how much will it cost to ship to Sweden?

[David Reid]

Hello, yes we have all the parts you need from an R33 GTS except AFM (This was damaged in the accident which wrote off the car). We can supply this for £1600, shipping I dont think will be too expensive send me a PM with your address and I will get a quote for you.

The extra parts you will need are the proshaft cut to length, we will supply you with the GTS one, you then need to have ths joined to you 200sx rear section this costs approx £100 in the UK. You will then need to make up some intercooler piping, use an R32GTR radiator and some electric fans.

You will also need to splice the R33 engine loom into your 200sx body loom

Let me know if you are still interested

[bozzeye]

can i have a price on an rb26 for my s13 and can you do the conversion or do you no any where that would

[matt140]

please pm me details of an sr20det conversion for my s13. do the prices include fitting? looking to do this quite soon if it does

[tommahawk]

intrested in a sr 20 conversion in my s13 ideas on price and aditional parts to run at 300 brake with the t28r i an running on my ca?

[Jeffers_S13]

can i have a price on an rb26 for my s13 and can you do the conversion or do you no any where that would

We dont have any 26's at the moment, although we are looking at a GTR at the mo, we could do the conversion but we are flat out with our project car at the moment so we wouldnt be able to give you a reasonable estimate time-wise for completion.

[Jeffers_S13]

please pm me details of an sr20det conversion for my s13. do the prices include fitting? looking to do this quite soon if it does

Hello

Conversion prices are as the thread lists, includes all parts you'd need to fit the engine to your 13, exhaust is the only thing you'd need to sort. The prices do not cover fitting.

Thanks

James

[Jeffers_S13]

intrested in a sr 20 conversion in my s13 ideas on price and aditional parts to run at 300 brake with the t28r i an running on my ca?

The prices for conversion parts are as listed above, you can run your T28 on the standard manifold and with a suitable chip and IC and supporting mods Id have thought it would get you over ~300BHP+ , best looking at what others have used to attain this figure.

Thanks

james

[MARK H]

hi guys i have a sr20det at the mo in my s14 . thinking i may rb25det it . would you take my engine in as like a part ex . if so what would the new price be

[Jeffers_S13]

PX would be possible yes, but we have just sold the only remaining RB25 we have. Can I interest you in a 26 !? :smash: ...should have it in a couple of weeks :)

We are hoping to get another 25 soon.

[adzn2k]

could you pm me a price of a 25 fitted please? in to an s14 i'm not too worried about time line on fitting as the car would be of the road for a while anyway? :) also could i have a price for the 26 fitted too :)

[Jeffers_S13]

could you pm me a price of a 25 fitted please? in to an s14 i'm not too worried about time line on fitting as the car would be of the road for a while anyway? :) also could i have a price for the 26 fitted too :)

PM'd :)

[J_200sx]

Hello mate,
Any chance you could PM me a price for all the parts needed for a manual conversion for my '95 S14 please? Thanks mate :)

[teh200sx]

PM sent for prices and details

Cheers

[Ed]

RB25DET Conversion to suit s13 or Skyline includes:-

Complete engine, turbo and ancillaries
Clutch flywheel
manual Gearbox
Front propshaft
Cross member
Engine mounts
Wiring loom with body side connectors
ECU
Ignition amplifier coil packs AFM ect
Clutch slave cylinder and pipe work
Down pipe
Basically everything you need to swap an RB25det into a 200sx or other car

Price start at 1600 we can source engines to match your requirement so please contact us


I wouldn't need all that to fit to my R32 GTST though would I? Like propshaft, crossmember, clutch slave cyl, gearbox etc.

And would you guys be interested in part exchanging with my RB20DET?? Its not a minter of an engine btw ;)

[dukey]

really considering the rb25 for my s13 now!!!

any idea of the complete price of all of the parts mentioned in the first post as i am not keen on prices start from or prices from!!!....lol

what state of tune are some of the engines you get??
am really considering getting this sometime soon!

cheers guys!

chris

[adzn2k]

could you pm me a price of a 25 fitted please? in to an s14 i'm not too worried about time line on fitting as the car would be of the road for a while anyway? :) also could i have a price for the 26 fitted too :)

Being the fool that i am i deleated the PM :annoyed: could you pm me a price for my above post again please :D including P/x for my sr20DET and G/box :thumbs:

[Jeffers_S13]

really considering the rb25 for my s13 now!!!

any idea of the complete price of all of the parts mentioned in the first post as i am not keen on prices start from or prices from!!!....lol

what state of tune are some of the engines you get??
am really considering getting this sometime soon!

cheers guys!

chris

Hello

The engines we normally get are usually standard, some cars have had air filters and/or exhausts.

The price is dependant on the mileage of the car really.

We are always looking for good R33's, but there seems to be a lack of them around at the moment.

James

[adzn2k]

Right i'm looking at getting an s13 now lol the on i have my eye on is an auto tho, could you guys give me a price for a manual sr20det conversion fitted by your good selves and also a price on an rb25 :thumbs: i know your busy guys but i would be willing to wait :sxoc:

[dukey]

thank you for getting back to me jeffers!

ok will let you know when im ready for it then and then we can see what happens....

cheers

chris

[Klajer]

Hi.

I have a s13 CA18 in Denmark where i am going to jam a SR20 in.
Could you please PM me a price and list over the stuff i need for this?

I already have the engine, box and loom but wiring and other things?
Is the kit completely plug n' play or do i need to do some wire-work?

[RAYMOND_S13]

SR20DET Conversion to suit s13 or Skyline includes:-
short engine,



Wiring loom with body side connectors
ECU
Ignition amplifier coil packs AFM ect
cam angle sensor, chain tensioner


got anythin along those lines!!!!

[Jeffers_S13]

Hi.

I have a s13 CA18 in Denmark where i am going to jam a SR20 in.
Could you please PM me a price and list over the stuff i need for this?

I already have the engine, box and loom but wiring and other things?
Is the kit completely plug n' play or do i need to do some wire-work?

At the moment we just sell the parts as they come out of the donor car, you will need to sort the wiring out to make everything work.

We can sell you all other parts like AFM, power amplifier, please see our 14 breaking thread for parts prices. What exactly do you have ?

[Klajer]

Hi.
I have a frontcut from a S14 so i pretty much have everything incl. loom, ECU, engine/box and so on.
I was just a bit lazy and wanted to know if you had a "plug n' play" solution for the wiring so i didn't have to fumble with that.

[Tammy]

got rb25 in ? thinking about converting my s14....

[Jeffers_S13]

Hello

Sorry we dont have any RB's in stock, there doesnt seem to be much around at the moment Im afraid !

[D4T]

Hi,

My CA has a suspected ring failure on number 4, can you supply me with some prices to get me up and running again? Would be interested on a price for another low mileage CA fitted, price to rebuild me CA, and maybe a price for an RB25 fitted :)

[super_woody]

do you have any rb25 conversions in yet buddy?

or a 1jz :D

[ScottB]

Hi guys

Can you PM me a fitted price and details for RB25DET or RB26DETT into manual S14. Also if you'd take a P/X + cash on the SR20DET & gearbox? PM me ballpark figures even if you havent got any RB's in at the mo.

Cheers

[Jeffers_S13]

do you have any rb25 conversions in yet buddy?

or a 1jz :D

Sorry, still no Skylines yet :(

[Mighty_Mini]

How much for conversion barring the Engine and box? Talking about RB25DET into 180sx..

Will have redundant SR setup if you were interested also? Would you consider a PX against an RB26 setup?

[hamby]

hello there i just wounded if you could tell me if this still aplys as i am now looking for this type of conversion for my s14a


Originally Posted by David Reid
RB25DET Conversion to suit s13 or Skyline includes:-
Complete engine, turbo and ancillaries
Clutch flywheel
manual Gearbox
Front propshaft
Cross member
Engine mounts
Wiring loom with body side connectors
ECU
Ignition amplifier coil packs AFM ect
Clutch slave cylinder and pipe work
Down pipe
Basically everything you need to swap an RB25det into a 200sx or other car
Price start at 1600 we can source engines to match your requirement so please contact us

[Jeffers_S13]

hello there i just wounded if you could tell me if this still aplys as i am now looking for this type of conversion for my s14a



Yes, it still applies, we just havent seen any R33's recently, an auto a few weeks ago and a couple of Cat B GTR's. If and when another comes up I will let you know.

Thanks

James

[hamby]

Yes, it still applies, we just havent seen any R33's recently, an auto a few weeks ago and a couple of Cat B GTR's. If and when another comes up I will let you know.

Thanks

James

hello bud thanks for that also would you give me a price on a gd condition sr20et engine and box as i have just lost 5th 4th and reverse and my engine might as well be done at the same time as it has done 138,000 miles and do u fit then if so price please thanks mate..

[Jeffers_S13]

hello bud thanks for that also would you give me a price on a gd condition sr20et engine and box as i have just lost 5th 4th and reverse and my engine might as well be done at the same time as it has done 138,000 miles and do u fit then if so price please thanks mate..

PM'd :)

[hamby]

PM'd :)

PM'd back thanks

[bozzeye]

hi lads, can i have a price on an rb25det fitted to an s14, got a low mileage sr20det engine a box to exchange, only 47k on it, just need a rough price, gonna need abit of time to save the pennys.

thanks
andy

[pete the dude]

hey
can you pm me with the price of a rb25 fitted into a ca s13

thanks
pete

[Jeffers_S13]

hi lads, can i have a price on an rb25det fitted to an s14, got a low mileage sr20det engine a box to exchange, only 47k on it, just need a rough price, gonna need abit of time to save the pennys.

thanks
andy

PM'd

[Jeffers_S13]

hey
can you pm me with the price of a rb25 fitted into a ca s13

thanks
pete

PM'd

[Bahnstormer]

Hey guys, can you PM me the rough price of an rb26 conversion (not including fitting, but delivered to BH23) for an s14a? Including g/box + prop etc.

I need to save a bit first, just a rough idea would be nice lol Also, I might have an sr20det for p/x if you're interested?

[Jeffers_S13]

Hey guys, can you PM me the rough price of an rb26 conversion (not including fitting, but delivered to BH23) for an s14a? Including g/box + prop etc.

I need to save a bit first, just a rough idea would be nice lol Also, I might have an sr20det for p/x if you're interested?

In terms of gearbox are you staying RWD or are you planning going the whole hog and going 4WD :)

Also, we're not keen on doing PX's (unless you are happy to accept a lot less than its potentially worth ?) as then we are effectively taking responsibility for two ~unknown engines if you see what I mean. I dont mean any offence, Im sure your engine is fine ! but you can see where Im coming from, we like to let buyers see and hear the engines run and compression test etc before they buy so we are all sure there are no nasty bangs, rattles, leaks, smoke etc before we pull it out so hopefully avoiding any potential issues following fitment by the customer :)

Let me know about the gearbox and I will PM you a guide price :thumbs:

Cheers

James

[Bahnstormer]

Ah yes, that info would've been useful for you! lol

I think I'll probably stay RWD :nod:

I understand what you mean about 'unknown' engines, so no worries :thumbs:

[Bahnstormer]

gentle bump :)

Also, can you PM me the details of the RB25 conversion package in your sig? What it comprises of, what else might be needed etc? :thumbs:

[ads.r]

hello :wave:

can you pm me a price for a rb25det and g/box fitted into a s14a please :)

[alexthegreat]

Hi can you pm me the price for the rb25 & rb26 kit only please :thumbs:

[adzn2k]

hi guys could you pm me a price for just an rb25 engine no ancils Cheers

[Ricey]

hi have you got a RB25 CONVERSION in stock! just blew my sr up :)

[David Reid]

hi have you got a RB25 CONVERSION in stock! just blew my sr up :)

Hello

Yes we have a 52K kit in £1750, its incar and avaiable to test, could also be test driven as the car isn't too badly damaged.

Give me a call on 07970 395823 if your interested

[Ricey]

thanks for reply , but got one sorted now thanks :thumbs:

[_shaun_]

Hi can you Pm me details for a RB26DETT into a S14? I guess I will need the engine and the gearbox?

[TomsTurbo]

Hi can you PM me a price for all parts for an SR20 conversion for my S13, Will have to be posted to N, Ireland too, BT44 8JR.

Thanks, Tom

[_shaun_]

Hi can you Pm me details for a RB26DETT into a S14? I guess I will need the engine and the gearbox?

:wave:

[BeerBringer]

1'st post says SR20 conversion starts at 1400. If I want a "complete" package and a engine in good condition for swapping into a S13. How much am I looking at?

Can you ship to Sweden?

/Marcus

[cr33ch]

just a shot in the dark but thought id ask anyways.

would you sell a complete plug and play 2JZ-GTE conversion for the s13? and how much if possible is it gonna set a person back?

[hawk1]

hi how much for a good rb26dett with a gearbox and can you ship it to norway?

[mestew87]

I was wondering if your able to supply a 1jzgte complete with the loom, ecu, manual box and the prop shaft, if so how much would it be delivered

[chrisdsx]

just a shot in the dark but thought id ask anyways.

would you sell a complete plug and play 2JZ-GTE conversion for the s13? and how much if possible is it gonna set a person bac/1jz ? to ireland

[Nero]

Hi. I have a LHD S13... Can you Pm me details and price about full conversion for a RB25DET and RB26DETT into a S13? Do you swap this engine?
Thank You
Pawel

[Ed]

Does the RB25 conversion come with an intercooler?

[RyanH]

Hi mate,

Few questions.

The RB25 conversion you've got at the mo, is the prop shortened all ready and is the wiring loom ready to effectively plug in and play?

Cheers

Ryan

[zipxx88]

how much for a rb25 o rb26 conversion in a s14 shipped to italy?

[TrIcK^]

Interesting, I might have to give you boys a shout if the engine ever goes pop.

[M@1975]

Been looking into getting an RB25Det into my S14a at the moment, can you guys PM me with approx costs for fitting as well as costs for the engine itself. mauy have a sock low mileage RB that I can get very cheap, would you fit an engine that was not one you supplied?

[Jeffers_S13]

Sorry to all you guys for the lack of response here. I'm afraid we have been neglecting the business a bit recently to try and get our drift car finished. We run the business in our spare time and the drift car has been an immense project that has taken an immense amount of time and money to complete. We hoped we would have been finished by now but we arent :(

When it is finally finished (we are 95% there now) we are planning to put together a detailed price breakdown for the various and most requested conversions. The work and quality of the workmanship will be as per our S15 EDC car :

http://www.sxoc.com/vbb/showthread.php?t=327275&highlight=S13

There are so many variations on what people might want that it is very time consuming to spend hours quoting for something that may ultimately come to nothing as I have found in the past also we wont actually be able to undertake any projects like this for the next month or two anyway. So I hope you can understand our reluctance to spend time doing so.

Please be patient and we will soon update the OP of this thread with the prices ! :sxoc:

James

[Speedy0o]

Hey,
Sorry to be another 1 to bother you again while your busy with the EDC n all :thumbs:, but i am very interested in the RB26 conversion and kit needed to install into my S14a!
Any chance you could PM me details when you are back up and running please please please :notworthy
Cheers :)

[interloper393]

hey guys can u pm me a price for having the rb26 loom cut into the sr20 s14 loom please, i have most of the parts here but the wiring worrys me lol

fankoo :D

[Jim_s13]

How much for a decent rb25 Jeffers? Standard, fairly low mileage?

[finns13]

hi

do you have eny rb20det?? im interested in that for my s13

[Tomski200]

:thumbs: Yeah, I'm looking for a rb20 swap too..

[g.reddy]

im interested in a 6cylinder swap, rb20 or 25. have you any in stock? also is it just nissan engine you do?

[cr33ch]

Hello,

Im interested in the RB25 for the winter rebuild.

I know you say everything is included in the package but what else is needed? from build threads ive seen, the clutch slave cylinder needs modification/swapping...

Does the prop match?

Do we get dials included in the package?

does the engine + gearbox sub frame/mount bolt holes line up with the s13?

Does the intercooler pipes line up with a FMIC?

Does the downpipe/elbow match?

Anything else missing?

Cheers
Alex

[adzn2k]

how much for a spec 1 rb25 with ecu but without gearbox, coilpacks, exhaust manifold and turbo, (i'll be dropping it in to an r32 gtst and have most of the above bits)

[igoman]

You have a PM ;)

[crippen_chippen]

Hi m8 i have a question do you have any Rb25det complete swapkits in stock for my s13 and how much is it? And i live in sweden so is it possible to get a shipping quot to stockholm? if you can ship it over here:)

you can send a pm or a mail.

crippen_chippen@hotmail.com is my mail!

Best regards Christoffer

[andrewcan]

hi could to tell me how much for the s14 to go into a s13 just need the price for engine gearbox and wireing loom and any think else to fit in to the s14 and how much to deliver to essex

many thanks

[chrisdsx]

how much for a rb26 with just the inlet manifold

[HOB]

Hello, yes we have all the parts you need from an R33 GTS except AFM (This was damaged in the accident which wrote off the car). We can supply this for £1600, shipping I dont think will be too expensive send me a PM with your address and I will get a quote for you.

The extra parts you will need are the proshaft cut to length, we will supply you with the GTS one, you then need to have ths joined to you 200sx rear section this costs approx £100 in the UK. You will then need to make up some intercooler piping, use an R32GTR radiator and some electric fans.

You will also need to splice the R33 engine loom into your 200sx body loom

Let me know if you are still interested

where do u get the props cut and joined? also can u send me all details for this conversion if your still doing it to hobthe1st@hotmail.com (my pm dnt work for some reason)

[adzn2k]

Hi,

Could you PM me your best prce on an SR20 conversion for an s13 i belive i can use a fair bit from my car

[charleroi]

hi can you give me a price for all parts for a sr20det conversion in a s13 please and an idea of what mileage engines you got too, cheers