PDA

View Full Version : S13 5 Stud Conversion Parts



David Reid
16-05-2007, 22:55
We can supply all parts required to convert your S13 to run on 5 stud hubs, allowing greater choice of after market wheels and brakes.

The parts we supply include :


Front hubs and uprights (with ABS sensors) £45 each or £80 pair.
Rear hubs £45 each or £80 pair.
Front bottom arms £35 each or £65 pair.
...and of course 4 extra wheel nuts ! £5 per bag of four


http://www.magix-photos.com/mediapool04/C9/BF/81/E0/42/8B/11/DB/86/18/48/96/52/13/B9/E6/oma/10/D7EF7550226811DC81AED5E5521FD2A7.jpg

We can supply this complete kit of parts for £200 collected OR £235 shipped within the UK (please PM for overseas P+P price).

*NOTE - The use of S14 lower arms affects the camber of the front wheels, which should be considered when fitting these parts. As an alternative, you may wish to source S14 lower ball joints for fitment to your original S13 arms, as such the price for the kit less bottom arms is £150 (£180 inc P+P).

Additionally

Once you have converted to 5 stud hubs, you will need to either re-drill you original discs to suit or you may wish to upgrade to an S14 front brake set-up

We can supply S14 front calipers and discs for £130 collected OR £155 shipped within the UK (please PM for overseas P+P price).

http://www.magix-photos.com/mediapool04/C9/BF/81/E0/42/8B/11/DB/86/18/48/96/52/13/B9/E6/oma/10/D8D5B6A0226811DC836993D4521FD2A7.jpg

Tomski200
23-12-2008, 15:19
Hi, I realise this is an old thread, but I would be interested in a s14 brake upgrade fro my s13, Including rears, as one of my rear calipers is sticking and fighting me all the way in terms of letting me repair it. Thanks, PM or e-mail if possible.

Jeffers_S13
31-12-2008, 11:45
Hi, I realise this is an old thread, but I would be interested in a s14 brake upgrade fro my s13, Including rears, as one of my rear calipers is sticking and fighting me all the way in terms of letting me repair it. Thanks, PM or e-mail if possible.

Hello

We can supply S14 or GTS calipers and discs at the mo, on the shelf and ready to go. Prices are in the respective GTS and S14 parts list threads.

hw200sx
20-01-2009, 18:22
Hi, do you have all the parts for a 5 stud conversion inc. s14 brakes all round available at the moment?

If so, how much for the lot posted?

Thanks

hiphophustla
20-01-2009, 20:06
im also intreasted in a 5stud hub conversion kit please pm me if still going

Jeffers_S13
21-01-2009, 14:32
Hello,

We are lacking front arms at the minute I think. We are hoping to get another 14a very soon, please pester me via PM, it's what I mainly check !

We could supply a partial kit, i.e. rear hubs and front uprights and then you could get new moog joints pressed into your existing 13 arms ?

Cheers

James

adzn2k
06-03-2009, 20:55
do you happen to have 5 stud rear hubs to fit an r32 gts?? PM Me :thumbs:

Jeffers_S13
30-03-2009, 11:29
We might have I will need to check, please PM me to remind me if I dont get back to you.

cr33ch
13-10-2009, 18:10
how much is a kit for full 5 stud conversion with rear 2 pot calipers and preferably the z32 drum handbreak assembly (i already have 4 pot fronts and im buying new discs) would prefiable like braided lines for the 2 pot calipers

Please PM me as i forget where i post :)