Brakes

[dobergoose]

Can you supply the 315mm or 330mm front kit for S13 with grooved only discs, I have grooved 300zx rear discs and would like fronts to match.

[Dan@DB-Power]

Hi Mate

Sorry it's either plain, or drilled & grooved.

Sorry
Dan

[dobergoose]

What do you have in stock in plain, 315 or 330mm and whats the total cost inc postage to Glasgow and are there any issues with gringing a couple of mm of metal from lower arms. Just out of interest do you know if 345mm fit under 17" Advans, I've measured them at 390mm at the narrowest point and how much would they be inc postage and do you have them in stock?

[Dan@DB-Power]

Hi Dobergoose

I have the 315's, 330's and 345's in stock. I can't see any issues with grinding a couple of mil off the lower arm, but this may not be neccessary yet, I still need to check the test car. I think they may have ground some off as the wheel had no weight on it, therefore the arm was at an odd angle.

Prices on the plains are:-
£180 for the 315mm
£230 for the 330mm
£250 for the 345mm

all + £10 for p&p


How much space have you got in front of your current calipers with the advans?

Dan :thumbs:

[dobergoose]

When you say in front do you mean between rim and caliper or the spokes and caliper?

[Dan@DB-Power]

Between your caliper and spokes :)

Dan :thumbs:

[dobergoose]

Ok just bolted my old disc back on, I've got about 3mm between the furthest out part of the caliper to the spoke onthe wheel, if the caliper moves radially outwards I'd gain another couple of mm at most.

[Dan@DB-Power]

Hi Dobergoose.

I personally think the 345's will be close, but may just squeeze in :)

Dan :thumbs:

[dobergoose]

Does the caliper move out any?

[Dan@DB-Power]

Hi Dober

With the 345mm kit, the caliper will move 3mm closer to your spokes and 32.5mm closer to the inside of your rim :)

I am working on a newer 345mm kit which may help you. Should be ready in a couple of weeks :)

Dan :thumbs:

[dobergoose]

My cars not going anywhere real soon so I think I'll wait and see how the newer version goes, if the worst comes to it and it doesn't fit I take it I'd be able to send them back and try a smaller set up?

[Dan@DB-Power]

My cars not going anywhere real soon so I think I'll wait and see how the newer version goes, if the worst comes to it and it doesn't fit I take it I'd be able to send them back and try a smaller set up?

:nod: