Anyone got some spare coilpacks?

[Welsh Dan]

Rightyo, i'm having problems with the car (see my thread in S14 technical), and I want to go through a process of elimination. I'm getting stuttering when the car is cold, which improves slightly when the car has warmed up, and really bad fuel economy, all after running on optimax. I've checked for boost leaks and there aren't any obvious ones, so my next port of call is spark plugs, coil packs and lambda sensor. I'm going to change the plugs anyway and see where that gets me, and also disconnect the lambda sensor, but has anybody local got a set of coilpacks they can possibly lend me, or even have a look at the car and see what they suggest?

[pablo_s15]

if mine work, you can park next to mine and do a quick swap over?

[Welsh Dan]

Is it only a 5 minute job? If so, that'll be ideal :thumbs:

[pablo_s15]

im free after 5 and weekends pm if you need a number etc i should be near simons shop tomoz around 5.30 if he has my snap off

[pablo_s15]

also try scott @ halfords his is close by and not being used

[Channie]

Take your strut brace off in preperation otherwise it wont be a five min job :no:

[pablo_s15]

10 mins then

[Channie]

I'l call you each time i need my strut put back on then! Takes me and ferret ages!

(I havnt forgotten about your steerin wheel! You dont need any special tools... put printing out some instructions for you!)

[Adam0bmx0]

I'l call you each time i need my strut put back on then! Takes me and ferret ages!

Really? lol

When i had mine it took about 2mins to take off! :confused:

[ferretca18]

channies has longer studs (oooer lol) so you have to undo each end. mine goes on a billion times easier than the bent s15 hahahah:nod:
if anyone knows if the s14 coilpacks are the same as the s13 then i have a spare.:thumbs:

[pablo_s15]

I'l call you each time i need my strut put back on then! Takes me and ferret ages!

(I havnt forgotten about your steerin wheel! You dont need any special tools... put printing out some instructions for you!)

you able to email them. its the the wirering ill get stuck on i expect