stage 1 chip fitting and set up

[Shortcut]

anybody local that can solder a jez chip in? and set up the timing? please thankyou:thumbs:

[Ramps]

I've got a spare ECU with a superchip :wack: fitted.

When I get home I'll check if it's fitted in a socket rather than soldered to the board, then you could just pull out the superchip and put the Jez one in without any soldering :thumbs:

I did my own but wouldn't recommend it unless your good at soldering (I'm not :wack: )

[Ramps]

Yep - it's got a socket fitted :)

If you want to swap it for yours, give me a shout :thumbs:

[Shortcut]

sounds great!! thanks ramps but wont you need it to put the stage 3 in?, when you want to do the swap over? would I need to get my stage one chip first?

[Ramps]

I don't need it - it's a spare auto ecu. I'll need a manual ecu for stage 3 ;)

Pick it up anytime, then you can let me have the other one back when it's all up and running - at the next meet or whenever. :thumbs:

[Shortcut]

now !!!!?????????lol fuel pump arrives tommorow and chip should be here at the weekend with luck

thanks for your help too:thumbs:

[Ramps]

Now's a good time if you want - not going anywhere tonight :thumbs:

[Shortcut]

cool bout 20 mins thanks again!!!

[Shortcut]

THANK YOU MR RAMPS:notworthy :notworthy :notworthy