S14/S14a FMIC's for £220 Group Buy

[Dan@DB-Power]

Hi Guys

In line with exhaust group buy I am now also offering a chance to get a FMIC as well.

The core size is a massive 600x300x76mm in size. The FMIC's include all pipes, hoses and clamps needed. You may need to skim some of your bumper and loose your foglights for fitting though, and of course put a hole in your battery tray but thats all routine :nod:

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=42529&stc=1&d=1171488305
http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=42530&stc=1&d=1171488309
http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=42528&stc=1&d=1171488301

As you can see the I/Cs and pipes are all shiny as well :)

As with the exhausts, I will place the order at the end of the month and will require payment the same time, once ordered they will arrive in about 2 weeks :)

Dan :thumbs:

[Dan@DB-Power]

Hi Guys

Also that price include postage to your door within the UK :)

Dan :thumbs:

[Badasssx]

Bloody heck! Bargain!!
Now why wernt you two weeks earlier :(

[Dan@DB-Power]

Why weren't you 2 weeks more patient :wack: :D

[bobbitt]

Why weren't you 2 weeks more patient :wack: :D

group buy kids!.. what can u do with em?

[bobbitt]

p.s. what hp rating do these have?
who manufactures these?
are the clamps decent quality?
any pics of clamps?
taa

[Richy_Boy]

:wack: NOW you turn up :rolleyes: :D

Wish my pipes were shiney... :nod:

Rich

[assclown]

very interested in this GB. Is the price dependent on numbers?

[Dan@DB-Power]

p.s. what hp rating do these have?
who manufactures these?
are the clamps decent quality?
any pics of clamps?
taa

Hi Bobbitt

They are manfactured by a company in China (aren't they all) not sure on the manacturer, but they seem to be more than up for the job and comparible to the hybrid I/C's :) The power rating is upto 650hp, but I would only like to run them on cars upto about 450bhp to be honest :nod:

I'm finding out about the clamps, and will hopefully get pics soon :)

Dan :thumbs:

[Dan@DB-Power]

very interested in this GB. Is the price dependent on numbers?

No chap, it's a case of I'll be making an order anyhow, but if you put you name down now you can get them cheaper as I'll save on postage :)

Dan :thumbs:

[bobbitt]

Hi Bobbitt

They are manfactured by a company in China (aren't they all) not sure on the manacturer, but they seem to be more than up for the job and comparible to the hybrid I/C's :) The power rating is upto 650hp, but I would only like to run them on cars upto about 450bhp to be honest :nod:

I'm finding out about the clamps, and will hopefully get pics soon :)

Dan :thumbs:

sound-cheers - dan

[Dan@DB-Power]

Hi Guys

Heres a pic of the clips:-

http://www.sxoc.co.uk/vbb/attachment.php?attachmentid=42739&stc=1&d=1171965118

They seem to be just jubilee clips, but I shall find out how much mikalors will be :)

Dan :thumbs:

[doninphi]

Can you get em with black silicone bits??? Or just blue?

Just need to sort funds!

Thanks
Phil.

[Alex_S14a]

I'm interested in this. I'm waiting on a cheque for a job I've just finished though. I'll get back to you on the weekend.

[Dan@DB-Power]

Hi Phil

Just blue I'm afraid chap :)

Dan :thumbs:

[Dan@DB-Power]

HI Guys

Can everyone just confirm who wants one :)

Dan :thumbs:

[Dan@DB-Power]

Also if you coudl put yourself down in a list format:-

1:-

[Adams]

Hey,

I have 2 questions: 1) are the pipes made in stainless steel? 2) Bit awkward really but how would those coolers compare to the ones made by apexperformance (type 1) in terms of lag (backpressure) and cooling capacity??

Cheers!

[Dan@DB-Power]

Hi Adams

I think the pipes are stainless steel, I would have though so :nod:

I would say they are very similar to the Apex Type 1's :)

Dan

[Dan@DB-Power]

Last day guys :)

Dan

[Alex_S14a]

I'll take one. :)

When do you need payment and when can these be expected by roughly?

Cheers

[Alex_S14a]

1:- Alex_S14a

[Dan@DB-Power]

Hi Alex

Payment need to be recieved by next friday, and they should arrive within 2 weeks :)

Dan :thumbs:

[Alex_S14a]

Ok, no problem. How do I pay? Paypal? Cheque?

[Adams]

Hi Dan,

did you get my PM??

[Dan@DB-Power]

Hi Adam

Got it chap and it's in hand :)

Dan :thumbs:

[Adams]

wicked :thumbs:

[Clouder_sx]

Am i too late for this!?????

Interested :)

[Dan@DB-Power]

HI Clouder

I'll bung you on chap if you want? I've order a few more anyhow :)

Dan

[Clouder_sx]

Yea mate, im 99% convinced :D

Just one thing - i assume the pipe thickness is same/bigger than as standard on the car? Looks really thin in the pic, but i assume thats because the core is big making the pipes look small? My car originally had an apex type 1 fitted, so am i right in assuming i should have do to little to no work? Already have hole in batter bay, cut bumper and no fogs :)

Edit - what about better clamps if they becomem available? Dont want pipes poping off :)

If so to above, i'll take one and can pay by paypal/bank tranfser/cheque :) up to you.

[Dan@DB-Power]

Hi Clouder

The pipework will be bigger than the standard :) but I can't say about the thickness of the walls of the pipework as I haven't seen one yet :(

You are right about the battery hole modding and the bumper/fog light trimming/removing :nod:

As for the clamps, I'm going to see how these ones work as new mikalor's work out to be alot :(

Dan :thumbs:

[Clouder_sx]

Im definately very interested, but would i be able to wait till you get one in and check pipe thickness/clamp quality etc?

Im happy to lay down a sizeable deposit to secure one if all is well with them? Or would you only want full payment? Let me know :)

[Dan@DB-Power]

Hi Clouder

I'll order in an extra one, and if you don't want it I can always ebay it :)

Dan :thumbs:

[Clouder_sx]

Hi Clouder

I'll order in an extra one, and if you don't want it I can always ebay it :)

Dan :thumbs:

Ok mate, thanks :) i'll almost definately have it so long as the clips can hold stage 1 without poping off :) have the money too, just pm me when they arrive and we're sort everything out :thumbs:

[Clouder_sx]

Dan mate i will have this off you for sure :thumbs:

Just looked at my wing mount and its in a worse state than i realised!

Let me know when you need the money :)

[Dan@DB-Power]

Hi Clouder

No probs they are on order anyhow :)

You can pay via cheque, or paypal (Add 2%) :) Drop me a pm with your desired choice :)

Dan :thumbs:

[Alex_S14a]

I would have thought jubilees would be fine. I had some i/c pipework made to fit my last car with no raised section on the ends of the pipes. With samco hoses and jubilee's at not far off 1Bar It never poped off once. :)

[Dan@DB-Power]

HI Guys

FMIC's are in now :)

They are very very nice and much better build quality that I was expecting :) :nod:

Dan :thumbs:

[Clouder_sx]

HI Guys

FMIC's are in now :)

They are very very nice and much better build quality that I was expecting :) :nod:

Dan :thumbs:

AWESOME!!! :D :D

Hope my cheque clears real soon, my wing-mount is buggered :wack: :)

Cheers Dan :thumbs:

[Richy_Boy]

Hey Dan, you couldn't supply me with just the pipes could you? I bought the cheap Apex FMIC and managed to snap the small tube near the throittle body off trying to get a pipe off it :(

:down:

Hopefully your stuff is a bit more 'sturdy!'

Rich

[Dan@DB-Power]

Hey Dan, you couldn't supply me with just the pipes could you? I bought the cheap Apex FMIC and managed to snap the small tube near the throittle body off trying to get a pipe off it :(

:down:

Hopefully your stuff is a bit more 'sturdy!'

Rich

Hi Rich

I might be able to chap, as I was planning on nicking the hot side out of one the kits for my S13 (should be the same) :nod: So that would leave me with a cooler and a cold side pipe :)

YHPM :)

Dan :thumbs:

[Richy_Boy]

Someone else has contacted me via PM (I post in the Apex area to see if they'd sell the piping too) - how much would you be looking for?

Rich

[Alex_S14a]

HI Guys

FMIC's are in now :)

They are very very nice and much better build quality that I was expecting :) :nod:

Dan :thumbs:


:thumbs: More things to keep me busy!!

When can we expect them by?

[Dan@DB-Power]

:thumbs: More things to keep me busy!!

When can we expect them by?

Hi Alex

Your went out yesterday so should arrive today/Monday :)

Dan :thumbs:

[paullen]

Do they come with the mounting brackets? I have a similar set up that I bought ages ago, but I don't have the brackets. Any chance you could split them? :)

[Dan@DB-Power]

HI Paullen

They come with all the brackets, I can't really supply just the brackets on their own though. Unless I go with what I said on post 41 :)

Dan :thumbs:

[Clouder_sx]

Dan, just wondering mate - do these come with stainless hotpipe included? :)

[Alex_S14a]

Hi Alex

Your went out yesterday so should arrive today/Monday :)

Dan :thumbs:

Yer it got here yesterday, my neighbour took it in and I didnt find out until 8pm.

I havent taken off all the wrapping but from what I've seen so far it all looks good to me. :thumbs:

[Dan@DB-Power]

Dan, just wondering mate - do these come with stainless hotpipe included? :)

HI Mate

Shiny hot pipe yes :) but I don't think they are stainless :)

Dan :thumbs:

[Clouder_sx]

HI Mate

Shiny hot pipe yes :) but I don't think they are stainless :)

Dan :thumbs:

Cool :) does that mean they are likely to rust? :wack:

My cheque should clear this week sometime hopefully :D

[Dan@DB-Power]

Cool :) does that mean they are likely to rust? :wack:

My cheque should clear this week sometime hopefully :D

:no: :)

Anyhow your kit went out on Friday, didn't worry about the cheque clearing as your a fully pledged SXOC'er :)

Dan :thumbs:

[Clouder_sx]

:no: :)

Anyhow your kit went out on Friday, didn't worry about the cheque clearing as your a fully pledged SXOC'er :)

Dan :thumbs:

:notworthy it just arrived :eek: :thumbs:

Thanks very much Dan, wasnt expecting it so quickly :) now off downstairs to unwrap it :D :D

[Clouder_sx]

Kit looks good :nod: :D

Will be fitting next week i expect, so will report back on how easy/hard it is :)

[Muttly]

Is this finished? If so how much for one out of the GB?

[Dan@DB-Power]

HI Muttly

I have 1 left chap, 1st to say yes get's it :)

Dan :thumbs:

[Muttly]

Right, I'll make a quick call and let you know.

[Muttly]

Postage to Ireland??

[Dan@DB-Power]

Postage to Ireland??

Hi Muttly

Do you have a postcode?

Dan :thumbs:

[Wookie]

answering for Muttly - No postcodes over here Dan, but he's in County Cork:thumbs:

[Dan@DB-Power]

answering for Muttly - No postcodes over here Dan, but he's in County Cork:thumbs:

in that case postage would be £32 :(

Dan :thumbs:

[Muttly]

Cheers Richie and Dan. I'll get back on to the guy and I'll get back to you asap. If someone else looks for it leave it off. Don't hold on to it for me.

[Yeah_Mick]

i picked one of these up off dan last friday and they are excellent, couldnt wait to fit it so i was out till 11:30 that night fitting it in the cold with some small floodlight so i could see. only a few problems, i got differnt brackets than the ones shown in the pic so they didnt fit but i just went down the skips at the industrial estate and made my own :thumbs: and if you have a standard dumpvalve i couldnt get that rigid plastic pipe to fit so you can either remove the dv and block it off or i got some 35mm radiator hose from halfords for about £9 and that does the job spot on, also im running it at 1bar and its had some abuse and the jubilee clips have been fine so far :thumbs:

also ive attatched a pic, the cold pipe isnt on in the picture but you get the idea :)

http://a362.ac-images.myspacecdn.com/images01/61/l_21538367d06839f84f94529976d9a319.jpg


just a quick note to everyone make sure you refit the arch liners properly as they make a nice bang when they come off at 120mph(on my privateland) so anyone sees an archliner on the m25 can i have it back please:annoyed:

[Clouder_sx]

Awesome news, i'm doing mine tomorrow :D

Have already blanked off the standard re-circ, so hopefully the bung will fit. If not, will shove it back in lathe and turn some more off :nod:

Rest looks like it should go in ok :)

[Dan E]

Alright Dan, you going to be doing any more of these in the future?

[Dan@DB-Power]

Hi Dan

Will be chap :)

Dan :thumbs: