PDA

View Full Version : white fibreglass top coat



Jez
26-11-2002, 14:19
Does anyone know where I can get a small amount of white fibreglass top coat resin? My gf has dropped something in my bath and theres a chunk about the size of my smallest finger nail missing...

Any ideas? I've tried a few DIY places and Halfords with out luck :(

Vez
26-11-2002, 14:23
You mean the gel coat top layer....

Any fibre glass place will be able to sort you with this, but you need the die too!

Jezz_S13
26-11-2002, 14:25
http://www.cfsnet.co.uk/acatalog/CFS_Catalogue_White_Gel_Coat_67.html

this is already white, you can get clear too, I'm not 100% sure if you need hardener too, probably.

StuyMac
26-11-2002, 14:25
The Gel usually comes either clear, black or white, and requires the hardening agent (catalist) (and no, viagra wont do this job ;) )

Its fairly cheap, as is the hardener, if you only require a small amount, maybe try a B&Q or similar sort of hardware shop :)

Jezz_S13
26-11-2002, 14:27
you'll need clear hardener, most stuff like isopon etc come with red, black or yellow hardener which is useless.

Jez
26-11-2002, 14:31
cheers guys! The CFS fibreglass place looks cool only £4 + VAT for white gel and catalyst! :)

Vez
26-11-2002, 14:33
Yep hes right....

Presently making a Carbon/Glass fibre wing foe the Ultima: The prototype is probably ready for affixing to my mates roof rack this weekend ;)

Jez
26-11-2002, 14:36
This BB is great - someone always knows the answer to pretty much every question :)

Vez
26-11-2002, 14:48
Okay then lets try your theory?

Two questions:

1) Chemical Formula for Napalm and how to make it...

2) Why do human beings believe in a higher plane or existance, and what the hells all this religous garble about?

;)

Jezz_S13
26-11-2002, 14:54
I saw a prog on how to make naplam, or similar, was really really easy.
Something like put foam, like the stuff you get in cushions and put it into petrol so it breaks down and forms a gel. Job done. :)


Sticky firy stuff


Oh and don't ge tme started on religion, it's all bullsh*t.

Nathan_200sx
26-11-2002, 15:07
Originally posted by Vez
Okay then lets try your theory?

Two questions:

1) Chemical Formula for Napalm and how to make it... petrol and styrofoam. Although it's better to drop canisters of heavier than air flamable gas, this seeps into bunkers and bolt hole's then fire a flare into it.

2) Why do human beings believe in a higher plane or existance, and what the hells all this religous garble about? religeon offers answers to people who refuse to believe that then end result is worm food

;)

AshT_200
26-11-2002, 16:26
Napalm hmmm, did this when I was at school for Chemistry project ;)

Lets see if I can remember.

The original napalm was, in fact, petrol gelled with soap.

Napalm is made by gelling petrol with the Aluminium salts of fatty acids.

You require Petrol, Naphthenic Acid, Palmitic Acid. This is used to Gell Petrol. Hence the name NAPALM.

Most pyrotechnics in films use a form of napalm, because it causes the fuel to burn slower and the resulting fireball last longer.

I have been told that apparently ordinary petrol doesn't gel well with polystyrene, but Mothballs is sometime a good additive, as is Ammonium Nitrate Fertilizer to Diesel. :eek:

I must have had a fun childhood :D

AshT_200
26-11-2002, 16:27
I second Nathan on the answer to the second.