View Full Version : K Sport seats and harnesses in stock
We now have stock of K Sport seats and harnesses. Seats £195, harnesses £94.50. Note the harnesses can be used as 6 or 4 point.
http://www.sxoc.com/vbb/attachment.php?attachmentid=39799&stc=1&d=1164205067
http://www.sxoc.com/vbb/attachment.php?attachmentid=39801&stc=1&d=1164205151
Smirnoff
22-11-2006, 23:24
FIA approved and will you be doing a GB on the seats or the full package
Ari Vatanen
22-11-2006, 23:29
Do these fit the std subframe or do they need a separate runner/frame ??? :)
Theyre not FIA approved :no: I dont believe anyone on here needs FIA seats do they? Is FIA necessary for the D1?
They need a seperate seat frame and runner but we have some under development :)
Nice. Do K-Sport make recliners, out of interest?
No, just the one type of seat at the moment :)
Smirnoff
24-11-2006, 23:19
im after 2 for my s14a
you should DO a GB
TheNickos
24-11-2006, 23:32
only D1 regs regarding seats belts are:
4-4. Seat belt
4-4-1. 4 points or better seat belt must be installed.
4-4-2. The width of the seat belt on driver side must be at least 2 inches, and the buckle must be a quick release type in stainless steel material.
The belts are 3" and 6 point if needs be :) I dont think the buckle is stainless but I can get FIA approvoal on the parts at a higher cost so I cant see why stainless would be a stipulation :confused: Ill have to look further into that.
I should be able to sort a deal on seats, harneses and seat mounts :)
Smirnoff
25-11-2006, 20:44
The belts are 3" and 6 point if needs be :) I dont think the buckle is stainless but I can get FIA approvoal on the parts at a higher cost so I cant see why stainless would be a stipulation :confused: Ill have to look further into that.
I should be able to sort a deal on seats, harneses and seat mounts :)
yes pls.
when? how much?
I need to get a price opn the mounts first, just looking into them now. I can do Brides from stock but maybe able to sort a better package deal with the seats. Just gathering info :)
Smirnoff
29-11-2006, 09:01
will be interested in 2 seats with mountings and one harness cos i got one
already :thumbs: :sxoc: :thumbs:
how much rafly will it be????
Ive sent Bride subframes off to be looked at :)
Hi there :)
Do the seats come in different sizes and what is the material?
Dave
Just one size and one material, fibreglass :) Theyre big enough to fit my ass in but still slim enough to hold normal sized guys properly.
Kieran_e1
11-12-2006, 18:28
seats and harnesses need to be fia approved for d1gb ( EDC )
Any developements on the seat mounts? ie price and ETA
Adam0bmx0
19-01-2007, 12:23
Theyre not FIA approved :no: I dont believe anyone on here needs FIA seats do they? Is FIA necessary for the D1?
They need a seperate seat frame and runner but we have some under development :)
Any more news on you subframe development an seat combo price or anything? :)
Adam
we have a test subframe here now, just need to get it fitted. We will hopefully be doing that on Sat or Sunday.
Great value but its a shame they can't get the approval :(
I think they can, I asked the question yesterday :)
Will these seats tip forward to get the little one out of the back? Or is he going to have to learn new climbing techniques :)
pmsl deffo new techniques :)
New techniques :nod:
I've been testing last night if this is possible. Hope the NSPCC aren't reading, but using one small infant child and a large supply of maltesers...
Young child, can unbuckle himself, and fling himself over the handbrake console and out of either door fairly satifactory. This can even be acheived in approx 7 seconds when a large supply of Maltesers are at stake.
Getting into the vehicle is initially not too much of a problem, it's the fact that seats need to be stood on by little feet, and this isn't a problem when leaving the car as said little shoes are dry. However, whenever it's wet or dirty, which is often the seats, and thus my backside, would get filthy.
Are there any plans to produce replacement seats that move forward to allow rear sear access ? (you can have the rest fo the Maltesers :) )
Adam0bmx0
23-01-2007, 14:35
Why dont you have a fixed bucket for the driver, and a reclining bucket for the passenger side?
We wont be doing any other type of K Sport seat but can supply a range of recliners from Recaro, Sparco, OMP, Momo, Cobra etc :) I might have a pair of used black Sparco relicners if theyre of interest? Torino 2s, nice seats.
I might have a pair of used black Sparco relicners if theyre of interest? Torino 2s, nice seats.
Yes, please let me know if you decide to sell, and how much they would be with subframes etc. I can pay in cash, maltesers, or combination of :nod:
200krisx
24-01-2007, 16:14
Dunno how I missed this but do you know the weight of the seats mate?
Cheers,
Kris :)
would we see a group buy with seats, seatbelts, and subframes any time soon?
Scottie just get the one seat mate for the driver and don't worry about the other. Then you get the benefit and not the earache :) don't get a recliner :p come round and see me if you want to try a bucket to see whats so nice about em from a drivers perspective.
Scottie just get the one seat mate for the driver and don't worry about the other. Then you get the benefit and not the earache :) don't get a recliner :p come round and see me if you want to try a bucket to see whats so nice about em from a drivers perspective.
Cheers Dave. I was trying out Karl's bucket recliner at the SXOC NW meet last night. It may be worth getting one, but I'd prefer them to match :ghey: , and I need a recliner for each side as when I put my car away at night there's only access from the drivers side !!
Do you know what you might wanna try then inbetween as its makes a huge difference I found. Get a sabelt harness kit as basically it gives the same effect by pulling you tight to the seat and stopping you flop about. Thats what I did before I fitted the bucket. Overall the bucket makes you feel more connected to the feel of the tho :)
The subframes dont fit properly, Im onto another, more accurate, supplier now.
Adam0bmx0
06-02-2007, 13:26
Ok cool, keep us posted on progress as i'd love a drivers bucket seat and rail. :thumbs:
Ari Vatanen
26-02-2007, 20:00
any news on the subframe Bren ;)
No, nothings moved. Il going to have to look at alternative ways of getting it sorted. Ill start on it tommorrow.
Ari Vatanen
26-02-2007, 20:11
No, nothings moved. Il going to have to look at alternative ways of getting it sorted. Ill start on it tommorrow.
:thumbs:
any update on this Bren ? , I'd be more than interested in them if they sit nice and low (I'm 6ft 2") thinking track days and helmets etc :thumbs:
just outta interest do you know what the width of the seat base is?
cheers
Ive not had time to move on with it recently. Its just a case of sending the parts off to be copied.
Ill measure a seatr as soon as I get two mins :)
Powered by vBulletin® Version 4.1.9 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.