Looking for rolling road graphs [Archive]

Jez

12-01-2006, 12:07

Guys

I'm looking for some rolling road graphs from cars running my chips. I'd like to use the graphs on my web site. At the moment I only have the graphs from a couple of sets of rollers - would like to get a selection for each chip.

So if you'd like to get involved, please post here with the graph and the spec of your car :)

Cheers
Jez

Nicely

12-01-2006, 12:20

Jez

12-01-2006, 12:26

Millway (http://download.jull.net/power_chart.jpg)
Autocraft (http://download.jull.net/salisbury_rr_graph.jpg)
Interpro (http://download.jull.net/interpro_rr_1.jpg)
Janspeed (http://download.jull.net/s15/janspeed_rr_03122005.jpg)

Thanks - what was teh spec of your car then? Was that with the S14?

The autocraft graph looks quite fictional to be honest...

Nicely

12-01-2006, 12:41

Millway was fairly standard on the first one, bit more boost. Boost and filter on the 2nd one. One or the other was out, cos there was no way I was running less for the 2nd run.

Autocraft was stage 1 S14 (yep, we all felt that about the graphs...)

Interpro was stage 2 S14

Janspeed was stage 2 S15.

Jez

12-01-2006, 12:43

Interpro was stage 2 S14

Was that running one of my ECU upgrades?

12-01-2006, 13:03

You have mine, although I may be able to add a stage 1 S13 in the near future.
You need Yaks Stage 1 S13 chip graph to show the max result ..

247 BHP @ fly | 222 BHP @ wheels | 246 lbs/ft @ SCA 12/2003 @ 17psi with a 12 year old T25 and confimed 2 years later as running within 2bhp :eek:

arry

12-01-2006, 13:18

I'll post mine when I get home :)

Nicely

12-01-2006, 13:55

Was that running one of my ECU upgrades?Emanage. 600cc high-flowed injectors. You MUST remember mapping those! :p

voodoo_melon

12-01-2006, 13:58

Mine (http://www.freewebtown.com/voodoomelon/RR_261bhp_2005-04-16/RR_261bhp_2005-04-16.jpg)

The lower/wobblier lines were when the turbo was falling to bits.

Mongoose, GT28RS, K&N, Hybrid fmic, HD Stage 2 chip, walbro.

Chris B

12-01-2006, 14:37

I could post a Stage 1 graph at 10psi (201bhp), SRR

Also my 237 at the wheels at Janspeed on stage 3, but that's not a standard engine... maybe able to post a better graph when we have mapped it properly :)

26659

Webbster

12-01-2006, 18:45

your fitting my chip next wednesday and i will be goin on the rollers soon after that so i will post the graph.

Stage 2 HKS induction kits,3" turbo back exhaust, GT28R, Apex AVCR, big front mount and what ever boost you recomend when you fit chip:thumbs:

Jez

12-01-2006, 18:48

Cool :)
Which rollers will you be using?

Webbster

12-01-2006, 20:34

i will probably using powerstation in Tewkesbury:nod: or may be interpro

SWEBB

12-01-2006, 20:42

this was mine from prosport rr day at back end of last year

http://www.kuddy.net/200sx/rrday/swebb.jpg

Stage 1 with fmic, full apex exhaust incl tubular manifold, avcr set to .9 bar on a 160k engine

12-01-2006, 20:49

also hosted there by kuddy are
Dr.Bobs, stage 1 S14a chip
http://www.kuddy.net/200sx/rrday/dr_bob.jpg
mine, but not as good as the one you have (less boost, 0.8Bar)
http://www.kuddy.net/200sx/rrday/sm.jpg

blue boy

12-01-2006, 21:42

Jez

U are fitting my stage 1 chip at the weekend which is good cos i will be doing this at the end of February. http://www.sxoc.com/vbb/showthread.php?t=189953

Not sure if the sva imports rollers have been used before on here so will give another interpretation for you.

Parker

12-01-2006, 23:47

I'd post mine but it had a few issues and had a big dip in the curves so not exactly what you're after!

Yak

13-01-2006, 00:01

You have mine, although I may be able to add a stage 1 S13 in the near future.
You need Yaks Stage 1 S13 chip graph to show the max result ..

and if you cant be arced searching for it...

http://www.sxoc.com/vbb/attachment.php?s=&postid=660582

More than 2 years on now and the T25 is still going at 17PSI and.. err... serveral trackdays!

cliffsx

16-01-2006, 19:05

i can put mine up but not sure if its one of your chips. its stage 2 from apex

RohanC

06-02-2006, 22:39

Dude, threads a bit old but.... i can send you my Janspeed one (237 at the fly, Janspeed) that you could scan and send back.

Got a Cam phone pic but its looks shite :wack:

Jez

06-02-2006, 23:23

It'd be good if you could please mate :)

RohanC

07-02-2006, 23:34

No worries.... although i have just remembered we have a scanner at work, so no need to post it!

See if i can do it tomorrow, otherwise i am bound to forget :rolleyes: