APT - Engine Rebuilds - SR20DET

[Gary@APT]

APT offer competitively priced on SR20DET Rebuilds.

We consider our Stage 1 engine to be entry level, eliminating the need to build an engine to standard spec.

It is uprated in all the right places, keeping consideration to cost yet finding the balance needed to safely run in excess of 350bhp.

For those that want that little bit more, we can add a few more choice parts, to become what we refer to as Stage 2.

Our rebuilt engines are all stripped and fully inspected before proceeding with any rebuild. Any parts that are deemed as below spec or excessively worn are discarded.

The parts, such as the Crank, Block and Conrods etc are then checked and measured precisely before being machined to accept the new Forged Pistons. We normally use Wiseco as they represent extremely good value for money.

The Flywheel is refaced and if required, a bit of weight is shaved off it.

Once the Crank and Conrods are brought up to spec, the whole Bottom End assembly is then Dynamically Balanced.

Once this has taken place, the Engine is mounted onto one of our Engine Stands, where it is meticulously cleaned. All major threads, such as those for the Headbolts are chased, this ensures that we get accurate tightening Torques. All Oilways are cleared using a High Pressure Airline.

Once we are satisfied that everything is surgically clean, we paint the Block. Our default colour for SR20 engines is Silver. Once the paint is dry we proceed to assemble the engine.

Gary has a wealth of engine building experience and is highly meticulous. This ensures consistent results and the by-product of this is our now proven Stage 1 Engine.

The Stage 1 build features :-

Fully Machined, Lightened & Balanced SR20DET Bottom End
Wiseco Forged Pistons
Genuine Nissan Bearings, Gaskets, Seals
Genuine Nissan Belts and Timing Chain
Nissan Conrods
Metal Head Gasket (According to Customers requirements)
Rebuilt Cylinder Head
Standard Nissan Cams
Refaced Nissan Flywheel

This engine is rated to approximately 350bhp and costs £3200. This price is fully fitted and based on exchange.

We are able to enhance this spec to include further uprated items which then becomes a Stage 2 Engine.

Stage 2 build features :-

Fully Machined, Lightened & Balanced SR20DET Bottom End
Wiseco Forged Pistons
Genuine Nissan Bearings, Gaskets, Seals
Genuine Nissan Belts and Timing Chain
Steel Conrods
ARP Head Stud & Nut Kit
ARP Main Stud Kit
Metal Head Gasket (According to Customers requirements)
Rebuilt Cylinder Head
Standard Nissan Cams
Refaced & Ligtened Nissan Flywheel

This engine will handle slightly more power, up to 400bhp, but is considered to be safer. The price of this build is £4200, again fully fitted and based on exchange.

After this, we will happily spec an engine to your individual requirements for power figures beyond 500bhp and provide a full solution right through to Manifold, Turbo and Cam Choice.

We are also able to, on request, have your Rocker Cover professionally Stripped, Prepared and Painted in a Colour of your choice. This additional service costs from £75 and really adds a fiishing touch to your new engine.

http://i5.photobucket.com/albums/y152/APT/Stimpy/SR20DETCamCover003.jpg

http://i5.photobucket.com/albums/y152/APT/KenEngine001.jpg

http://i5.photobucket.com/albums/y152/APT/KenEngine004.jpg

We can also go further than this by advising, supplying and fitting Suspension Tuning, Brake Upgrades, Electronic Items, Mapping and much more.

All we ask for is that the Exchange engine is in rebuildable condition. We are very fair in this respect. Please call or email us for further details of this.

[andyfield]

Would you do those rocker covers just by themselves, could be a very popular service as they look tasty :nod:

Shame I can't afford either of the engines yet!

[Gary@APT]

I could arrange for a Rocker Cover to be done for you. The cost may be slightly higher if not part of an Engine Build, depends on what Colour you want.

Here's what my *Cough* Ford *Cough* Rocker Cover looks like......

http://img.photobucket.com/albums/v16/christianbeccy/Engine%20Build/RockerCover001.jpg

Not everyones cup-of-tea, but looks superb in real life.

Christian.

[Actual_Ben_Taylor]

Does look excellent, I want my cam cover and plenum doing like that :)

[C 'n' B]

As an amendment to this, we now also offer Stage 1 Plus and Stage 2 Plus spec's. This is simply the substitution of the Wiseco pistons with HKS items. This raises the cost to £3500 and £4500 respectively. This is merely to overcome the fact that we have not pushed the Wiseco's as far as we would be prepared to take the HKS pistons. So, a little more certainty in that area.

Also, as of today, any engine build that takes place with APT will be subject to a £500 refundable surcharge, to be paid in addition to and at the same time as the booking deposit. This is due to the fact that we must receive a rebuildable engine in return for your new engine. The deposit will be returned in full or part depending on the results of inspection of the engine in the following area's :-

Crankcase - Must be serviceable and able to be rebored within acceptable tolerance. No cracks present.

Crank - Must be serviceable and straight. Depends on how bad the big-ends have worn as to how bad crank damage will be.

Conrods - Must be serviceable and straight.

Cylinder head - Must pass a crack test and height-check to verify that it hasn't been over-skimmed.

Camshafts - These are usually OK, but any out-of-tolerance wear will render them scrap.

If any of these area's become an issue, we will discuss this with you and try to reach an amicable solution. You will be given the opportunity to source replacement parts, which must also meet our (very fair) requirements.

This is a scenario we have tried to avoid, but unfortunately cannot continue to absorb the costs involved in losing these parts.