PDA

View Full Version : New cheap S14 Apex induction kits, Apex induction boxes and complete induction sets


bren
18-08-2005, 15:28
We will very soon be offering some new cheap induction components.

We have Apex induction kits based around the highly effective Apexi induction filter, Apex induction boxes and Apex induction sets (filter and box kit).

The boxes are made from stainless and are stamped out of a flat piece of material meaning they are very high quality with perfectly defined edges and centre cut out.

The induction kits come complete with all nuts, bolts, washers, brackets and genuine Apexi gaskets.

http://www.sxoc.com/vbb/attachment.php?attachmentid=21577&stc=1

http://www.sxoc.com/vbb/attachment.php?attachmentid=21578&stc=1
Paul200sx
18-08-2005, 15:38
any idea on price?
bren
18-08-2005, 15:49
£139 for the complete kit
£65 for the induction box
£85 for the induction kit

A group buy maybe on the cards ;)
amnesia
18-08-2005, 15:50
Will the boxes fit if you have a FMIC ?
bren
18-08-2005, 15:59
The only kit that might pose a problem is the Hybrid.
Paul200sx
18-08-2005, 16:31
group buy on the full kit sounds good. whats the lowest the prices could go down to Bren?
arry
18-08-2005, 16:32
Are you thinking of doing S13 boxes as well Bren? :)
MarkeyB
18-08-2005, 16:36
Will these boxes be avaliable on their own?
andy14a
18-08-2005, 16:37
The only kit that might pose a problem is the Hybrid.

It doesnt on mine :)
Paul200sx
18-08-2005, 16:46
Will these boxes be avaliable on their own?

yes, as advised above they will be £65 :thumbs:
MarkeyB
18-08-2005, 16:47
Sorry me being blind....
Cheers. :eek:
bren
18-08-2005, 17:27
Maybe £115 for the full kit.

Good to hear Andy :)
Jonny
18-08-2005, 17:42
Any plans to make a box to fit with the Z32AFM? :) I guess there's a few people that will be going this route now that Jez has stage3 sorted...
bren
18-08-2005, 17:51
You can fit our box with a Z32. Im not sure how much messing about is needed but it can be done. Ill let you know how much messing around, if any, id needed next week when we get the next batch of boxes through and Ive fitrted one to our drift car :)
Jonny
18-08-2005, 17:57
You can fit our box with a Z32. Im not sure how much messing about is needed but it can be done. Ill let you know how much messing around, if any, id needed next week when we get the next batch of boxes through and Ive fitrted one to our drift car :)

Cool - cheers. I guess you will need to hack bits off it to make it fit with a hybrid IC tho?
sojourner
19-08-2005, 15:55
Bren

I ordered an Apexi induction kit amongst the bit last week. Any chance you can put your full kit in instead - including box. I reckon that should leave me owing you about a tenner, which you can take on the card.

Cheers

Mike Shimwell
Mr OCD
19-08-2005, 16:09
I'd be interested in the induction box myself so I can shut up the people who keep pointing out I need a heat shield :p
dj_C
19-08-2005, 18:13
Just registering interest in the GB :thumbs:
amc
19-08-2005, 18:14
could be tempted to sell my blitz sus for the entire kit if a GB came up.
Matt_S
19-08-2005, 19:08
Any plans to make a box to fit with the Z32AFM? :) I guess there's a few people that will be going this route now that Jez has stage3 sorted...

The cone of the Apexi kit is AFAIK the same for Z32 and S14, so it will be a matter of a bit of jigery pokery with the AFM and redrilling the box for the larger PCD of the Z32 AFM.
Irf200
19-08-2005, 23:49
getting a little confused here, sorry :rolleyes: . is the actual filter APEXI or APEX. would be interested in GB, and most likely so would my brother :)
dj_C
20-08-2005, 14:28
getting a little confused here, sorry :rolleyes: . is the actual filter APEXI or APEX. would be interested in GB, and most likely so would my brother :)

Says Apex'i on it, if you look carefully...
tussey01
20-08-2005, 14:43
so whens the kit up for GB??
m4tt_c
20-08-2005, 14:50
i'd be interested in the induction box
Irf200
20-08-2005, 15:28
Says Apex'i on it, if you look carefully...
ooops sorry :o . yup i'm a definite then and so is my brother :)
GaryP
23-08-2005, 16:32
Bren,

Put me down for a kit please.

Gary
Chris B
25-08-2005, 17:43
CA18 S13 kit going to be available?
Trickle
25-08-2005, 17:49
I want one too :)
knighty
25-08-2005, 18:06
Oh..............Go on then! Ill have the full kit if its a group buy!
_Billy_
25-08-2005, 19:30
Put me down for the Kit and box too !! ... my first mod ...

Will be looking to get one of them good exhaust deals next, prob with de-cat, but don't wanna' be too loud ...

Cheers
scouser
25-08-2005, 21:53
Another one for the group buy. Come on Bren start the buyers
Jord
25-08-2005, 23:39
I'd be interested in a group buy on just the box, already have the intake.
BBB
26-08-2005, 12:21
Registering interest in a group buy on the box and induction kit.
Jolly F
26-08-2005, 12:25
Bren - they will fit with the hybrid...
Swampy
26-08-2005, 19:10
Im definatly interested in the full kit when they are ready, especialy at the group buy price !!!!
bren
30-08-2005, 09:52
The induction boxes are all ready with the suppliers. I want the adapter that joins the afm to the filter in alloy rather than stainless so the suppliers are remanufacturing the batch for me. Theyre nearly done now.
bren
30-08-2005, 10:06
CA kits will follow if the SRs are popular :)
Chris B
30-08-2005, 13:17
:) Yay, I'm sure they will be :thumbs:
BBB
06-09-2005, 15:55
The induction boxes are all ready with the suppliers. I want the adapter that joins the afm to the filter in alloy rather than stainless so the suppliers are remanufacturing the batch for me. Theyre nearly done now.

Any update on when these will be ready Bren? Will it go to group buy?
BBB
09-09-2005, 09:31
Bump
bren
09-09-2005, 09:43
We had a batch of stainless adapters ready to go but theyre heavy so Ive asked the suppliers to make them in alloy. They have sorted the prototype and are sending it to me for evaluation.

I will run a group buy but dont know when it will be.

This post was just a heads up to progress on new products, not a sales thread :no: I think we can do better on the adapter so its going to take longer to sort the filter kits. I could have just gone with the original stainless adapters and not p1ssed off our manufacturers but I chose to delay everything, wind up the suppliers (not on purpose of course) and go with what I think will be an item better suited to the job.

I will take my time on this and future new products after letting the latest S13 and S14 intercoolers go before they were fully sorted which left me in a load of sh1t going back through and sending bits out to complete the kits. These kits will be fully sorted to my 110% satisfaction before we let them go :nod:

That means I dont have a due date :no: They are coming and we will be doing them, of that there is no doubt. The due date is something different.
BBB
09-09-2005, 11:59
Cheers for the update Bren. Fully with you on the need to get top notch products. :nod:

I was very happy with the FMIC by the way. :thumbs:
bren
09-09-2005, 12:01
Good good :)
bren
09-09-2005, 12:02
Thanks for the review btw, much appriciated :)
bren
15-09-2005, 13:11
I have a cuple fo sampels of the new adapter plates that I commissioned. Theyre superb, very light, just waht I wanted :)

Theyre not as bling as the others but theyre much better suited to the job. Ive approved them with the manufacturer and theyre arranging shipping for the batch now.

I think you will be very impressed, I am very pleased with myself :thumbs:
BBB
15-09-2005, 13:14
I have a cuple fo sampels of the new adapter plates that I commissioned. Theyre superb, very light, just waht I wanted :)

Theyre not as bling as the others but theyre much better suited to the job. Ive approved them with the manufacturer and theyre arranging shipping for the batch now.

I think you will be very impressed, I am very pleased with myself :thumbs:

Excellent news. Can't wait to see the posting on the group buy. :thumbs:
bren
15-09-2005, 13:18
As soon as I have a due date Ill start the GB :)
bren
16-09-2005, 11:39
The induction boxes are here now :)
knighty
23-09-2005, 13:55
Any word on the group buy yet?
Butuz
23-09-2005, 21:41
Will the induction boxes fit on to other make induction kits? I have a green induction kit as seen below.

http://www.butuz.net/images/s14/engineswap/ready.jpg

Cheers

Butuz
Tazs' dad
27-09-2005, 19:25
Any news yet Bren?
Turbo'd_up
28-09-2005, 13:52
I'll take the complete kit when it goes on offer.
Let me know when.

Josh - 07958 520881
dhracer
01-10-2005, 20:23
Just registering interest for when the GB goes ahead, I will be getting a kit :nod:
scott_d
02-10-2005, 15:04
Im also interested in a group buy :)
Squirt
02-10-2005, 18:28
Yep im interested bren, ill keep a look out for the ready date. cheers. (full kit)
bren
03-10-2005, 10:25
I was off last week but Im working throu8gh things now to get back on top and find out where we stand with the various orders that were processesing when I was off.
dj_C
06-10-2005, 23:33
Any news? We all want em!
bren
07-10-2005, 09:58
The boxes will be here on the 18th :)
BBB
07-10-2005, 18:00
The boxes will be here on the 18th :)

Bren, I thought you had the boxes already and were waiting for the adaptors for the filters? :confused:
bren
07-10-2005, 18:03
We had 15 boxes come through but they all sold as individual sales. We have a load more coming on the 18th.
dj_C
10-10-2005, 21:37
Bren - any idea what the turnaround time would be once you get the boxes in? I'm going on track on the 23rd, and would like to get the induction kit and a jez chip fitted in time... Happy to pay in advance if necessary.
bren
11-10-2005, 10:55
We should be able to get them out the day they land or at the latest the following day.
BBB
11-10-2005, 11:22
Bren, sorry if I'm being thick here....

On the 18th, will you just be selling the induction boxes or is the full induction kit (adapter, filter and box) now available? I'm eagerly awaiting the full kit and obviously can't just install the induction box.
bren
11-10-2005, 11:28
We will have the induction kits here this week or first thing next week. The induction boxes are due on the 18th :)
BBB
11-10-2005, 11:30
Cool. I look forward to the group buy post. :nod:
dj_C
11-10-2005, 15:34
Cool - will place an order for a few bits at the same time. Any thoughts on GB prices yet?
Topper
11-10-2005, 16:34
Hi Bren, would the full kit fit onto my S15?? AND the Z32 afm??

Cheers
bren
11-10-2005, 16:39
You need a Z32 filter for the Z32 afm, theyre £45.50.

The induction box should fit but itll be tight.

The gb price will be around £115 for the box and kit :)
Topper
11-10-2005, 16:44
You need a Z32 filter for the Z32 afm, theyre £45.50.
Is that an Induction kit? :confused:
bren
11-10-2005, 16:57
Its just a filter, thats all you need.
Topper
11-10-2005, 17:00
Good shout, thanks
Turbo'd_up
18-10-2005, 13:10
It's now the 18th. When is the complete kit going to go on offer?
bren
18-10-2005, 13:30
The ship was due to dock on the 11th but didnt arrive until the 14th so the shipments been delayed by a couple of days.
dj_C
24-10-2005, 17:04
Any news on the boxes?
bren
24-10-2005, 17:11
Theyll be with us tommorrow :)
Turbo'd_up
26-10-2005, 13:32
So do you know the price for the full kit yet?
dhracer
26-10-2005, 13:36
look here (http://www.sxoc.com/vbb/showthread.php?p=1919108#post1919108)