first pics of Buffy's 200

[Bigtone]

Buffy was around so I whipped out the camera

http://img.photobucket.com/albums/v166/bigtone/100_1326.jpg
not sure the number plate is um legal
http://img.photobucket.com/albums/v166/bigtone/100_1329.jpg

http://img.photobucket.com/albums/v166/bigtone/100_1330.jpg

http://img.photobucket.com/albums/v166/bigtone/100_1333.jpg

http://img.photobucket.com/albums/v166/bigtone/100_1324.jpg

for reasons that will become clear at a later date I cant show the engine bay :wave:

[cardiff scum]

sweat.umm...carbon

[Muttley_109]

looking nice :thumbs:
cant wait to see it in the metal

[Dai]

Dont like it. Think you've wasted your money there Mike. :wack: :wack: Spoilt a nice car :eek:

[tony2sx]

:smitten: :smitten:
AWESOME

[Dai]

PS only kiddin !!! Looks sweet.

[dan_blu]

mmmmmmmmm looks sweet mate !! have to take me for a ride mate !!

[Moby-Dick]

I like the lights - I was going to just tint the middle section on mine , but I'll go the whole hog now :)

[Buffy]

NIce one Tone :thumbs:

Whenis the other pic gonna appear? :wack:

[unipsycho]

very very very nice car :wave:

[Bigtone]

NIce one Tone :thumbs:

When is the other pic gonna appear? :wack:
dont know, see what happens with :nod: my thread in the members section

[Buffy]

My new wheels were delivered today, but as there was nobody at home they are being redelivered tomorrow :cool:

New pics as soon as I can get them on :thumbs:

Thanks for all the comments guys :thumbs:

[Geraint Thomas]

Last picture from the rear with the lights on looks awesome. :thumbs:

[pdh 14a]

That looks stunning mike :thumbs:
Those no-plates may be illegal though :wack:

[pdh 14a]

My new wheels were delivered today, but as there was nobody at home they are being redelivered tomorrow :cool:

New pics as soon as I can get them on :thumbs:

Thanks for all the comments guys :thumbs:
I like the wheels that are on there :nod:
love the rear spoiler :smitten:

[Buffy]

Last picture from the rear with the lights on looks awesome. :thumbs:

The lights are not on in that pic :no: the reflectors still work :thumbs:

lights on in this pic

http://www.sxoc.com/vbb/attachment.php?attachmentid=19218&stc=1

[Buffy]

I like the wheels that are on there :nod:


You'll like the new wheels even more :nod:

[ade76]

You'll like the new wheels even more :nod:

are they square :confused: :wack:

[GeeSexAah]

Looks very nice I like the carbon! are they just tinted lenses with that can spray stuff or a bought item? And what is the spoiler
Col

[Buffy]

Ade, you have now gone from being unfunny to not making any sense at all :wack:

[Buffy]

the bonnet, tailgate and rear spoiler are carbon.

The rear spoiler is r32 gtr type (from apex).

The lights are lexus style ones that I sprayed myself with tinting spray (look much better now you can't see them LOL)

[Buffy]

I din't weigh either of them :no: It is very easy to fit them on your own though, so must be light :D

I'll try and get my car on some scales soon :nod:

[Butuz]

Wow that looks bloody stunning Mike!!! Cant wait to see it in the flesh - come take me for a ride big boy! :nod: :wack:

Butuz

[FullMetalGasket]

Nice one Mike :thumbs:
Look forward to seeing it on the weekend :)

[Bigtone]

Nice one Mike :thumbs:
Look forward to seeing it on the weekend :)
should be an interesting sesh :D

[squidmato]

Very very nice dude! Love the lights and the all black stealth look is sweet :cool:

[pdh 14a]

I din't weigh either of them :no: It is very easy to fit them on your own though, so must be light :D

I'll try and get my car on some scales soon :nod:
We could turn this into a competition!
My money is on the car weighing less than big tone,martgit6 and ade age16 :D

[Geraint Thomas]

The lights are not on in that pic :no: the reflectors still work :thumbs:

lights on in this pic

http://www.sxoc.com/vbb/attachment.php?attachmentid=19218&stc=1

Still looks good, proper number plate on the back then!

[ade76]

We could turn this into a competition!
My money is on the car weighing less than big tone,martgit6 and ade age16 :D

:whip: oi i am healthy 151/2 stone although i used to be 17 odd :wack:

[FullMetalGasket]

should be an interesting sesh :DI don't want you getting any dodgy ideas! :eek:
:p

Any news on your Manifold yet?

[Dave200]

looking good mate :thumbs: pics dont do it justice thought mate, looks about 100 times better in the flesh :smitten:

[Buffy]

New wheels landed today :D

http://www.sxoc.com/vbb/attachment.php?attachmentid=19253&stc=1

http://www.sxoc.com/vbb/attachment.php?attachmentid=19254&stc=1

8x18 front and 9x18 rear :cool:

Just need to get the toyo's fitted tomorrow

[Bigtone]

they look 15" :confused:

[Buffy]

http://www.sxoc.com/vbb/attachment.php?attachmentid=19255&stc=1

[Butuz]

Oh yes buffy my son - they look as good as you described them :D

Get em on!!! Get em on!!

Butuz

[Bigtone]

http://www.sxoc.com/vbb/attachment.php?attachmentid=19255&stc=1
only playing you sensitive git...

thay look awesome mate :thumbs:

[pdh 14a]

ME LIKE, ME LIKE :eek:
Used to have compo's on my clio rt,they were really good quality for the money :thumbs:

[GINNO]

Here he goes on about his Clio again......Paul it was shite!! LOL

[Buffy]

LOL :wack:

[Escy]

i love compo MO's. hard to tell from the picture but are they the older (and IMO, better) style? they look sweet :)

do you have any pictures of the front headlights?

its looking impressive :D

btw. nice rear number plate light ;)

[Muttley_109]

:notworthy
they are going to look amazing mike.

now you need a red light that goes back and forth to fit into the front bumper :D

[GAV200]

Bellas roters! :thumbs:

[matt_j]

Buffy the car looks mint cant wait to see it with the new wheels on, it all looks very evil :thumbs: love it :notworthy

[Butuz]

so lets have a side on pic - i wanna see my brakes! :D

Butuz

[SFC]

there's tidy :thumbs:

[Jezz_S13]

So what do the new ones look like Escy??

MOs on compomotive's web site look the same as Mike's...
http://www.comp.co.uk/popups/mo19.htm

[Escy]

http://www.reyland.co.uk/Details.asp?ProductID=58

i'm wrong, the new ones are Buffy's. the older ones don't have the spokes go to the edge of the rim, they are set in and have more of a dish. (on your link, if you click on the pictures of them on some cars you can see the difference). its the older style with the dish i prefer, that said, i've never seen the newer style in the flesh. :)

[Jezz_S13]

He bought them from Martin, he advertises them on fleabay.:)

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=72255&item=7979940466&rd=1

[Escy]

i think Martins prices are easily the best around. Jez, do you remember the other thread where we were on about the weight of these? i'm sure Buffy can give us a good idea now :nod:

[Jezz_S13]

www.wheelweights.net

[Escy]

good link that. they say they are just over 26kg for 8x18

i can't wait to see pictures of them on your car Buffy :)

[Buffy]

well here theyare :D

http://www.sxoc.com/vbb/attachment.php?attachmentid=19283&stc=1

the ofsets I chose are just about perfect I think :D front are et25 rear et35. I had to flare the rear arches very slighly (done with a blow torch and mallet :smash: )

http://www.sxoc.com/vbb/attachment.php?attachmentid=19284&stc=1

http://www.sxoc.com/vbb/attachment.php?attachmentid=19285&stc=1

The rear wheels have a bit of a wider lip on them

http://www.sxoc.com/vbb/attachment.php?attachmentid=19286&stc=1

[ade76]

your copying my black alloy look :p

[Bigtone]

awesome

[Buffy]

Thanks mate :thumbs:

[Dave200]

awesome

HELL YEAH!!! GOOD WORK BUFFY :thumbs:

[Buffy]

Cheers Dave, but no need to shout :wack:

[Dave200]

:rolleyes: getting over excited again, all that talk of butt plugs :wack::D

[Buffy]

:ghey:

[Buffy]

I'm going out with a mate next time it's sunny to get some proper pics :nod:

If I paint the bonnet pins I won't be able to fine the car in the dark :wack:

[Mick]

that looks lovely mate nice work :thumbs:

[Escy]

i liked your old wheels but these just look so hard its unreal. good choice there :) it looks spot on with the offsets like you say, do they rub on full lock. impressive looking car, when can we see engine bay pics?

[Jezz_S13]

you need to lower that bitch a bit, get some spacers and stretch some 195s on there mate.

other than that, looks roood as hell mate. :thumbs:

[RohanC]

That looks good enough to eat :wack:

[Mick]

That looks good enough to eat :wack:


mmmmmmmmmmmmm car

[Sx Olli]

I bought some tsw volcanos..gunmetal grey with polished rims but for some reason the laquer is getting coverd in stone chips..i could just paint them matt black, looks dam good on ur stealth bomer

[Bigtone]

wait till you see what Buffy and my have just done now :p

[MeLLoN Stu]

wait till you see what Buffy and my have just done now :p


dread to think :eek: :ghey: :D

[matt_j]

wait till you see what Buffy and my have just done now :p
oh christ....ANOTHER SHEEP??????????he'll be costing welsh farmers MILLIONS :indiff: :annoyed: :annoyed: :down: :no:

[Bigtone]

pics on the way

[matt_j]

pics on the way
make it a less bloody version than the last one :indiff:

[Bigtone]

ok here we go....

out comes the tape
http://img.photobucket.com/albums/v166/bigtone/100_1339.jpg
any ideas..

[MeLLoN Stu]

whale tail spoiler ? :wack:

[Chris]

ok here we go....

out comes the tape
http://img.photobucket.com/albums/v166/bigtone/100_1339.jpg
any ideas..


eeeerrrrmmm maybe you bolted the back window in :whip: :smash: :D

[Bigtone]

eeeerrrrmmm maybe you bolted the back window in :whip: :smash: :D
f u c k i n g b i g m o u t h

[Bigtone]

now the drill :eek:
http://img.photobucket.com/albums/v166/bigtone/100_1340.jpg

out so we can reseal it
http://img.photobucket.com/albums/v166/bigtone/100_1344.jpg

finished
http://img.photobucket.com/albums/v166/bigtone/100_1347.jpg

[Chris]

f u c k i n g b i g m o u t h i was right :D :D :D

[Bigtone]

we also did mine :D
http://img.photobucket.com/albums/v166/bigtone/100_1354.jpg
:p
http://img.photobucket.com/albums/v166/bigtone/100_1355.jpg

[Bigtone]

i was right :D :D :D
:nod: :D

[disco-tom]

Why wasn't gluing it good enough?

[disco-tom]

And where's the engine pics? :)

[Bigtone]

Why wasn't gluing it good enough?
for some reason the clear silicone didn't take to the perspex :confused:
so we re stuck it with better stuff (black mastic :thumbs: )
and bolted it down....we allways had the intention of bolting it :nod:

[Bigtone]

And where's the engine pics? :)
cant show you yet ;)

[Chris]

cant show you yet ;)can i tell them ;)

[Bigtone]

can i tell them ;)
nnnnnnnnnnnnnnnnnnnoooooooooooooooooooo

:D

[Chris]

nnnnnnnnnnnnnnnnnnnoooooooooooooooooooo

:Dok then

how about a game of wheres buffy :wave:

[Bigtone]

ok then

how about a game of wheres buffy :wave:
last time I spoke to him he was in Newbury:p

[Chris]

last time I spoke to him he was in Newbury:pmmmm short game that :nod:

[Bigtone]

http://img.photobucket.com/albums/v166/bigtone/100_1355.jpg

why blue !!!!! :no:

why not black !!!! :nod:

:wack: :p :p ;)
so I can also find my car in the dark

[Bigtone]

mmmm short game that :nod:
:wave:
but where is he now :confused:

[Chris]

:wave:
but where is he now :confused:dunno :confused: switched my phone off :wack:

[FullMetalGasket]

last time I spoke to him he was in Newbury:p
So he'll be ready for Interpoo then :cool:
I want to see what bodge you lot have managed :smash:

[Chris]

So he'll be ready for Interpoo then :cool:
I want to see what bodge you lot have managed :smash:

whats newbury got to do with it :confused:

[Bigtone]

So he'll be ready for Interpoo then :cool:
I want to see what bodge you lot have managed :smash:
tis gona be close :nod:
and its a good bodge :thumbs:

[FullMetalGasket]

whats newbury got to do with it :confused:
Almost certainly the same reason I was there on Mon :wack:

[Chris]

Almost certainly the same reason I was there on Mon :wack: :no:

[Buffy]

Just got back from putting a few more miles on my engine before getting it mapped tomorrow.

I left Tony's house at ~8 pm, went up the M4 as far as newbury then turned around, went back down the M4 to the M5 drove to Birmingham then turned around back down th M5 along the M50 and home :eek: Had to stop a few times for petrol :D

I road killed about 3 gazzilion flies :wack: pics tomorrow when the sun comes up :wack:

[Bigtone]

back to Buffys car
side on (ish)
http://img.photobucket.com/albums/v166/bigtone/100_1342.jpg
Zed brakes
http://img.photobucket.com/albums/v166/bigtone/100_1343.jpg

[Buffy]

You wouldn't believe I polished the car thursday night :wack:

[Bigtone]

back
http://img.photobucket.com/albums/v166/bigtone/100_1337_0001.jpg
have a close look at the number plate :D
http://img.photobucket.com/albums/v166/bigtone/200sx/plate.jpg
:wave:

ps your correct we woulden't

[Buffy]

LOL :wack:

[FullMetalGasket]

That'll be good for a laugh then, Tone and Buffy both turning up as the Gaylords of Kingston :wack: :ghey:


(I know there's an 'E' in there..... :p )

[Kev]

Lookin good Mike, but im most inte3rested in the engine pics, esspecially a certain bit and how u have attached other bits to it :nod:

[pdh 14a]

Looking good,love those wheels :thumbs:
That no-plate wouldn't have seen light of day with me though :no: :D

[Buffy]

Lookin good Mike, but im most inte3rested in the engine pics, esspecially a certain bit and how u have attached other bits to it :nod:

On the rollers today, I'll have some engine shots then :nod:

[Kev]

looking forward to it mate :thumbs:

[Bigtone]

I know somthing that wont be in shot :D

[VIDAL BABBOON]

So where are the pictures then ?

[emmy_s13]

lights look fantastic, have to ask though are they mot legal? dont think tinting lights are.

[VIDAL BABBOON]

Rear light tinting is ok as long as the light is visible through the tint.

And the reflector is still visibe through the tint.

[Chris]

lights look fantastic, have to ask though are they mot legal? dont think tinting lights are.can't see him having probs with the mot :no:

[FullMetalGasket]

:wack:

[VIDAL BABBOON]

can't see him having probs with the mot :no:


:wack:

[Buffy]

:D as can be seen in all the pics even the reflectors work through the tint :nod:

[Kev]

so how did the rr go mate??

[Buffy]

Not to good :no:

It was too hot in there and simon has set my inlet charge temp ignitoin retard(10 degrees) to 50 degrees.

Showed 302.5 ATF but should be more than 400 :wack:

I'm going to take it again when it's a bit cooler :)

I haven't forgotten about your pics :wack:

[Kev]

Hehe Tone just sent me a pic of something.
wow im.... lost for words :wack:

[Buffy]

LOL, needs must mate :D

Only a temporary job until the ally one I'm getting fabricated is finished :nod:

[Bigtone]

:D

[Buffy]

:D

BAN HIM :nod:

[Bigtone]

BAN HIM :nod:
http://ultimatejapcars.co.uk/forum/html/emoticons/bleh.gif

[Buffy]

Is that how you got Simon to map my car at such short notice? :p

[Kev]

Miaaaaaaaaawwwwwwww :D :D :D

i was just admiring ur custom fabrication mate :thumbs:


:wack:

[Buffy]

It may be a bad bodge, but it works :nod:

[Bigtone]

Is that how you got Simon to map my car at such short notice? :p
well he was out with you half naked on Saturday :wack:

[Buffy]

Oh yeah, D'oh :wack:

[Bigtone]

Miaaaaaaaaawwwwwwww :D :D :D

i was just admiring ur custom fabrication mate :thumbs:


:wack:
you should have seen Pointblanks face when he spotted it :D

[Kev]

It may be a bad bodge, but it works :nod:

contradiction in terms Mike, cant be a bad bodge if it works mate :thumbs:

thought it was a great bodge actually, was just expecting something on the other end of the spectrum.
thought it was top sectret shit lol

[Chris]

piccies :mad: :whip: :annoyed:

[Bigtone]

piccies :mad: :whip: :annoyed:
on its way... :wave:

[Buffy]

Again, can you BAN biggay for 24 hrs :wack:

[Chris]

ooohh look i got email :D

with a piccy :nod:

















:eek: :eek: :eek:






is that what i think it is














:confused: :eek: :hurl:

[Kev]

Again, can you BAN biggay for 24 hrs :wack:
so them hosetails u were talking about.... i think we could ban Tone for 24 hours ;)

[Buffy]

is that what i think it is


probably :nod:

[Buffy]

so them hosetails u were talking about.... i think we could ban Tone for 24 hours ;)


:thumbs: :cool: :p

[Kev]

done :)

[Buffy]

:eek: :wack:

[Chris]

what is it :confused:

[Kev]

and undone again lol.

shouldnt goad me when i been drinking lol

[Buffy]

that was a quick 24 hrs :thumbs:

[Bigtone]

did I just get a 5min ban :confused:

[Kev]

Hi Tony mate, id like some stuff chromed buddy :wack:

erm u might have just got a 5 min ban lol

[Buffy]

did I just get a 5min ban :confused:

:nod: :D

[Chris]

Hi Tony mate, id like some stuff chromed buddy :wack:

erm u might have just got a 5 min ban lolsod off mines next :mad:

[Bigtone]

Hi Tony mate, id like some stuff chromed buddy :wack:

erm u might have just got a 5 min ban lol
I'll be good

[ade76]

I'll be good

[insert random simon gag].......[/insert random simon gag]

btw the car looks good jimmy krankie :thumbs:

[Buffy]

thanks womble :)

[barryjdart]

Come on. Where are the Pics. :wave:

[Buffy]

http://www.sxoc.com/vbb/attachment.php?attachmentid=19529&stc=1

TD06-20G
http://www.sxoc.com/vbb/attachment.php?attachmentid=19530&stc=1

I tapped into the plenum for the vac takeoffs
http://www.sxoc.com/vbb/attachment.php?attachmentid=19531&stc=1

needed shortening to clear the clutch MC
http://www.sxoc.com/vbb/attachment.php?attachmentid=19532&stc=1

notice the carbon plug cover :cool:
http://www.sxoc.com/vbb/attachment.php?attachmentid=19533&stc=1

[Bigtone]

I see the intercooler pipe is allways out of shot, soooooooo
http://img.photobucket.com/albums/v166/bigtone/100_1323.jpg
:D

[Buffy]

Looks better in this pic :nod:

http://www.sxoc.com/vbb/attachment.php?attachmentid=19534&stc=1

[Bigtone]

:D

[Jim]

I see the intercooler pipe is allways out of shot, soooooooo
http://img.photobucket.com/albums/v166/bigtone/100_1323.jpg
:D

That looks like my welding and fabrications skills :D

Very nice setup you have there :D

[Leviathan]

The see through strut bar looks cool, is it any better than the heavy metal ones??

[Buffy]

The see through strut bar looks cool, is it any better than the heavy metal ones??

I'm in the process of redesigning one ;)

[Kev]

couple of questions Mike.
Whats the grey thing under the pas pump in the first pic?
What have u done with the idel control, looks like u have it monitiring under bonnet air instead of plenum temp........

how much did u shorten the plenum by, and why?
thought u reckoned it fitted fine.
why did u put the take offs on top instead of drilling the side (for tidyness).
do u find the brakes are less assisted with the smaller bore hose?

Kev

[Jim]

Kev that thing under the pas pump looks to be a blitz sus...

I remember the plenum having to be sorted at the back for clearance iirc...

For the others i dunno ;)

[Kev]

Yeah thats why i asked Mike dummy :p

oh and yeah i see its the air filter now :o

i know Tone said ND had to shorten the plenum, but Mike reckoned it would fit ok, so im wondering what has changed.
Martin has told the lad to remove 5mm from it, im wondering if thats enough?

[Jim]

Yeah I know you did :p

I dunno, you offer a scotsman some help and he just goes off on one :p

[Kev]

i cant find a constructive response for u english people right now, so all i can say is blaw it oot yer arse bawbag





:D :p

[Jim]

i cant think of a sensical response for u english people right now, so all i can do is follow a regional stereotype, perpetuated by an American...





FFFFFFFFRRRRRRRRRRRREEEEEEEEEEEEEEEDDDDDDDDDDDDOOO OOOMMMMMMMMM


:p

[Kev]

erm i think u will find mel gibson is actually australian :nod:

so :p to u :p :p

[Jim]

erm i think u will find mel gibson is actually australian :nod:

so :p to u :p :p

Nope, thats not true, Born 3 January 1956, Peekskill, New York, USA ;)

[Bigtone]

watch out Jim he'll ban your arse...
he did me and I never said a word :eek: :wave:

[Bigtone]

oh and Kev....
you should visit the Scottish section a bit more
:p
http://www.sxoc.com/vbb/showthread.php?t=148002

[Jim]

watch out Jim he'll ban your arse...
he did me and I never said a word :eek: :wave:

Thats what I love about being me, he can't ;)

:D

[Buffy]

couple of questions Mike.
Whats the grey thing under the pas pump in the first pic?
What have u done with the idel control, looks like u have it monitiring under bonnet air instead of plenum temp........

how much did u shorten the plenum by, and why?
thought u reckoned it fitted fine.
why did u put the take offs on top instead of drilling the side (for tidyness).
do u find the brakes are less assisted with the smaller bore hose?

Kev

1.As has been ponted out it's the air filter :rolleyes: :wack:

2. the idle is controlled by the ECU, the origional cold start valve is bolted to the front of the plenum and bleeds air in as needed :)

3. I cut about 5mm off the plenum ( I did say it only fitted due to the hole in the rear)

4. coz it was easier :wack: and looks more mad with all the pipes on the top :D

5. The servo works as normal (from what I can remember having not driven an s13 for almost a year)

[Kev]

Thanks mate, Tone, i replied on ur Nd thread, but as i said earlier, Mike said he didnt need to cut it, but did anyway.
Mike the lad has cut 5mm off the end for myself and martin so we should be fine.

James, ram it :p

[bren]

Does anyone know what size the brake servo pipe take off should be? :)

[Jezz_S13]

I 'think' is 1/4 bsp.

[bren]

Does anyone know for sure?

[Jezz_S13]

Mike does. :)

[bren]

Mike?? Hellllooooooooooooooooooooooooooooooooooooo :D

I need to know to be able to order our plenum and our S13s not here so I cant check on that :no:

[Kev]

Bren if ur ordering from the same guy, he should have the sizes from Martins and mine, which are now ready as i understand it

[Jim]

Surely its somewhere where a tape measure is though ;)

[Jezz_S13]

Mike?? Hellllooooooooooooooooooooooooooooooooooooo :D

I need to know to be able to order our plenum and our S13s not here so I cant check on that :no:


surely you have his mobe number?
Give him a ring or txt. :)

[bren]

Youd think so but he says he needs the dimensions. he must have his reasons.

Jim,

Yeah, it is but I want to fnalise the order now so I need the measurements now. Ill have to go and get the S13. Need to sort some stuff on it anyway :)

[Jim]

If you get a chance to answer my pm would you be able to let me know how much the guy charges ;) (For my next possible project ;))

[bren]

The number we have is wrong :(

Jim, Ill have a looksee now :)

[Biaggi]

Get some tidy pics mate on monday :D