Matty2Fatty
09-05-2005, 18:35
Hello all at APT,
Could you give me a quote on......
Removing the engine (or do i have to do this myself?)
Changing the big end bearings (they're ok now, but...)
Regrind the crank if it needs to,
a piston ring is gone somewhere (so i was told by the guy on the dyno machine anyway) so they'll need changing,
fitting a paddle clutch,
skimming & lightening the flywheel if you can,
change the belts (i have them already)
fit nismo gb & engine mounts
inspect the head, maybe have that rebuilt too,
Is there anything else you'd advise i have changed/fixed while the engine is removed?
Thanks :thumbs:
Matt
Could you give me a quote on......
Removing the engine (or do i have to do this myself?)
Changing the big end bearings (they're ok now, but...)
Regrind the crank if it needs to,
a piston ring is gone somewhere (so i was told by the guy on the dyno machine anyway) so they'll need changing,
fitting a paddle clutch,
skimming & lightening the flywheel if you can,
change the belts (i have them already)
fit nismo gb & engine mounts
inspect the head, maybe have that rebuilt too,
Is there anything else you'd advise i have changed/fixed while the engine is removed?
Thanks :thumbs:
Matt