S13, S14 and S14a combined front pipe and de-cat replacement pipes nearly in stock [Archive]

bren

14-06-2002, 11:43

Ive got S13 front pipes (replaces front pipe on early models and front pipe and cat on later), S14 front pipe/cat and S14a front pipe/both cats replacement units on their way to me now. They should be here on Monday so if anyone wants one give me a shout :)

The S14 and S14a are £130 and the S13s are £125.

simanc26

14-06-2002, 13:00

MEMEMEMEMEMEMEMEMEMEMEMEME!

S14a Front cat replacement please!!

YAY!!!

:D

Actuator at 14psi makes me go :D :D :D :D

bren

14-06-2002, 13:05

LOL :D You want one then? ;)

simanc26

14-06-2002, 13:11

Maybe:rolleyes:

:p

simanc26

17-06-2002, 09:06

Are they there yet? :D

bren

17-06-2002, 10:19

Nope

simanc26

17-06-2002, 13:46

:(

Are they there yet? :D

I sound like a kid on a motorway.

bren

17-06-2002, 14:19

Nope ;)

simanc26

18-06-2002, 09:00

simanc26

18-06-2002, 11:06

I really want one of these.

Where are they :(

bren

18-06-2002, 11:25

Ive got the invoice through so they should be here today :)

simanc26

18-06-2002, 15:25

Are they there yet..........................................

:(

bren

19-06-2002, 09:28

A big box has just arrived from SE so I expect thatll be them :) Just checked, and yep, its full of pipes :)

simanc26

19-06-2002, 11:54

PM'd you mate. :)

simanc26

19-06-2002, 12:37

Is it on its way? Is it is it is it?

:D

Can I have a new pen? :)

bren

19-06-2002, 13:16

Yep, its on its way :) And ill send you a couple of pens too :rolleyes: :D

simanc26

19-06-2002, 15:21

TAC will be happy if you do.

BYE CAT!

bluesx

19-06-2002, 16:14

Bren,

I take it these will fit the S14a without any bending about now?

I am so tempted too!

bren

19-06-2002, 16:24

Yes, they have been redesigned and there shouldn't be a problem with them now.

If you want one let me know before 6pm today and you will have it tomorrow :)

Si T

19-06-2002, 19:48

Bren, what`s the spec on the pipes?.... T304 stainless? 95mm pipe?? (do they look as phat and sexy as a Blitz exhaust?)

bren

19-06-2002, 22:02

Si,

95mm :eek: no mate theyre not 95mm. Theyre 60mm and stainless :)

simanc26

20-06-2002, 15:45

Its not here yet! :(

Was it Citilink again Bren?:rolleyes:

Still time yet I suppose........................

Can you tell how much I want those Pens! :D

bren

20-06-2002, 15:55

Yep its City Link again. Theyre usually very very good but Ive had one or two problems in the last couple of days.

Ive got the manifest here, going to Ash House etc etc?

simanc26

20-06-2002, 16:04

Thats right, no worries, I will let you know tomorrow if it turns up. :D Really need the pens...............................

bren

20-06-2002, 16:10

Im going to phone them now to make sure its going to arrive today........

They are going to contact your local depot to check status and get back to me :) Theyve still got another hour and twenty mins yet though no its not panic time just yet ;)

bren

20-06-2002, 17:02

It was delivered and signed for at 16:22 apparently :)

simanc26

24-06-2002, 15:46

As I had already got rid of the underneath cat, I had to cut through the pipe to get it to fit :(

But its on now, only thing is, no Gasket for the turbo end? :eek:

Managed to get the old one back on but I am worried it'll start to blow.

Should there have been one? Can you supply one? :(

Got the Pens though!!! :D :D :D

bren

24-06-2002, 15:51

No they dont supply gaskets with the pipes. What do you mean you had to cut through the pipe?

simanc26

24-06-2002, 15:58

Cos it replaces both Cats.

My longlife zorst replaced the other cat, but that is also where the silencer is and its loud enuff. I only needed the downpipe bit if you see what I mean?

Its not a problem :D

POP! ;)

Vez

24-06-2002, 15:59

I think he means he had replace the second cat already ;)

BTW how much are these pussy removal devices?

bren

24-06-2002, 16:01

I still dont get it?? You mean you cut through the front pipe and re-welded the flange back on?

Vez,

£130 and in stock :)

Vez

24-06-2002, 16:06

Is that delivered?

bren

24-06-2002, 16:09

No, its a tenner carriage.

simanc26

24-06-2002, 16:10

I needed the bendy bit, that replaces the front cat. Then had to cut it at the back so I didn't have to remove my silencer.

So new pipe attachs to turbo, that cat gone, then cut, then welded onto longlife zorst with a custom made sleeve as it was a different bore size.

Phew,

I will try and draw a piccy later :)

bren

24-06-2002, 16:20

Ah, I understand now. :)

Vez

24-06-2002, 16:23

BTW, whats a Nismo SOlid shift (presume its a knob)?

And Bren, how much is a single cat replacement? Just the down pipe?

Just pondering me options atm ;)

bren

24-06-2002, 16:26

Dont know what a solid shift is. If its less than £150 then its probably a gear knob!! LOL

The cat replecemtns are £65 but you cant get the down pipe alone. Even if you could itd be around £120 so it doesnt make economic sense to buy them seperately :)

simanc26

24-06-2002, 16:27

Its not a knob, its the entire stick. Its makes the gearbox a bit tighter kind of. It means your less likely to fluff a gear change, unless you are KevinPS at Santa Pod...................:D

TAC

24-06-2002, 23:48

Originally posted by simanc26
TAC will be happy if you do.

:D :D :D

Andy

25-06-2002, 13:37

Bren, you couldn't post a piccy of one of these pipes
could you please ???
Had a customs decat job done about 6 weeks ago
(wonderful timing !) but I've got to get the brackets
put back on the cat so they can bolt back on come
MOT time :(
If your pipe includes everything might have to think
again.
Thanks

bren

25-06-2002, 14:34

http://www.apexperformance.co.uk/catalog/images/S14%20front%20pipe.JPG :)

Andy

25-06-2002, 16:16

Thanks Bren - much thinking and bean counting
to be done I think:)

pressurized300

25-06-2002, 21:43

are you able to ship here? I need a 3" downpipe and 3" exhaust, I don't have to have cats on my car, so if you have cat-eliminator(s) I need one too. I have a '95 200sx, does it being left hand drive effect the exhaust placement? Do you have any bov kits that use a turbo xs "RFL" bov? I've got mine from my now dead eclispe turbo, just need the flange adapter. also, can you get the kit to mount the 300zx tt afm to an S14? sorry for all the questions, but I gotta go fast...errr...faster :)

bren

26-06-2002, 10:05

I can send pipes to Germany, no probs :)

If youve got a 95 then you must have the pre- face lift model? The S14, not S14a? Ive got front pipes and de-cats on special offer for that model, just £90 for both. They normally sell at £170 so theyre virtually half price :)

I would asume that the systems would be the same, regardless of whether the cars left or right hand drive but I cant take responsibility for the exhaust if it doesnt fit. Youd have to do the rearch to make sure they are the same before ordering.

The above pipes are 2.5" though, not 3".

"Do you have any bov kits that use a turbo xs "RFL" bov?"

I dont know what you mean??

Ill look into the mounting kit :)

pressurized300

26-06-2002, 10:32

Thanx, what are you listing your prices in? do you except euros? The mounting kit for the "RFL"' blow off valve is exactly what I need, I have the valve and mounting kit for a 1st generation turbo eclispe, I want to put that bov on the 200sx.

bren

26-06-2002, 10:42

The prices are in UK Pounds. Euros are no problem though. If you pay by credit card then the credit card machine and bank will automatically work out the conversion anyway :)

Ive not heard of a company called RFL who make BOVs? What size base has it got? Is it a round tube or has it got a flange on it? Have you a pic?

pressurized300

26-06-2002, 11:04

http://www.srswap.com/pics/products/txs_BOV_H-RFL.jpg

the name of the company is Turbo XS....the valve is called the "RFL"...I don't use my credit cards, I can do a bank transfer or send a cashiers check payable in euros.

bren

26-06-2002, 11:10

Sorry, I dont have anything to do with Turbo XS, I wouldnt even know where to get them from in the UK.

A bank transfer would be fine.

pressurized300

26-06-2002, 11:29

It's ok, think I found a lead on one(bov kit)....I also found some yanks selling full 3" downpipes and exhausts as well as cat eliminators...lemme try them first, I need 3" because I'm looking to run a TDO6-25G turbo (think it's Greddy's T6?kit :)...thanx, I'll be in touch though.

bren

26-06-2002, 12:20

Whos doing 3" de-cats? I can get the large downpipes but not de-cats.

pressurized300

26-06-2002, 20:34

A company at this web address; www.srswap.com ....check them out, lots of yanks buy j-spec sr20's and drop them in the 240sx's.

RichSeal

27-06-2002, 09:38

This may be a stupid question, and is probably answered elsewhere, but how does removing your CAT affect the MOT? I have a 93 S13, If I remove it will it still pass?

pressurized300

27-06-2002, 11:02

I can't answer this question because I'm not subject to emmission testing, I don't fall under the German system here, and I can modify my car as I please. I've heard from a couple guys in california where they do have emmission tests, that they still passed after removing the cats on their 300zx's, but that's a totally different animal (4 cats total)...sorry I can't help.

Originally posted by RichSeal
This may be a stupid question, and is probably answered elsewhere, but how does removing your CAT affect the MOT? I have a 93 S13, If I remove it will it still pass?

Vez

27-06-2002, 16:16

J REG IS THE LAST YEAR YOU DONT NEED A CATALYST!

So figure it out ;)

bren

27-06-2002, 16:18

I thought the year when you had to have a cat was 93?

Vez

27-06-2002, 16:19

Bren, How much are the 3" down pipes for an s14a?

Well the main question/wants are:

Downpipe (no cat)
Cat replacement (yes I do want seperates)
HKS Super Dragger

I uderstand the super dragger is cat back and has 3" pipe, are these easy to mate to the 2" cat replacement pipe?

Cheers

Vez