Im placing an order with PDM for quickshifts, strut braces, bushes, antiroll bars.

[bren]

Have a look here: www.pdm-racing.com

Im placing an order next week so if anything wants anything leave a post here and Ill price it up :)

[Jezz_S13]

Bren, I want some of these...

Eccentric Bolts for Camber Adjustment
These eccentric bolts replace your stock strut to spindle bolts and allow for camber adjustment on the 240SX.

S13 (1989-1994) Front Camber Bolt Kit (12mm). . . . . $25.00/pair

From this page.
http://www.pdm-racing.com/products/suspension.html


And some of these

Whiteline T/C Rod Bushings

One of the most troublesome bushings on the 240SX and 300ZX, this silicone filled "donut-shaped" bushing which is pressed into the Tension Control rod, is one of the first bushings that wears out. When it fails, the viscous filling will leak out, and corrode your front suspension's paint finish, and will cause erratic steering (especially at highway speeds). The front end will also make a "clunk" noise when you make tight turns. Fix the problem with these Whiteline replacement bushings.

SPF1202K TC Rod Bushings ... $40.00

From this page.

http://www.pdm-racing.com/products/suspensiontc.html

How much is that likely to be?



Also just a price for now for...
Front Lower Control Arm Bushings

Combine these polyurethane bushings with the t/c rod bushing to eliminate slop from your front end. Keep contact with the road by maintaining proper front end geometry.


240SX (S13 1989-1994)
Front Lower Control Arm Bushings (SPF1009K) . . . . . $50.00/pair

http://www.pdm-racing.com/products/suspensionbush.html

[mambastu]

Hi Bren,
Can you give me a price for:

Whiteline front anti-roll bar kit - Is this the BNF20Z or 21Z ?
Whiteline rear anti-roll bar kit

PDM rear strut brace

Autometer S13 RHD 2 gauge pillar pod

SSR Performance racing oil catch can

3" MAS Adaptor with Nissan bolt pattern

[mitch]

can ya get one of those 3 pice bodykits if so i need a all in price including shipping

and are they any good

[Mike_S13]

How much will the Canadian Driving lights, Clear front indicators and front underspoiler be?

[bond_200]

I'm interested in the OBX short shifter, how much and how long will it take to arrive?

Also, a price on the underspoiler for 91-94 S13 would be nice. :)

Cheers Bren

[Tricky-Ricky]

Price for SPF 1202K TC rod bushings please Bren!
And yes il'e have some please!

[NikB]

Can I have a price for a front strut brace for an S14a.

Cheers

Skint Nik

[StuyMac]

Ill have a short shift thingy :D :D

[JonnySpeedbump]

Can I have a set of the Clear front indicator/sidelight lenses for an S13 please - $30
Ta,
Jonny

[MERLIN]

I interested in the ain’t roll bar kit for the S14a if available!
And the short shifter also for the S14a
:D

[simanc26]

Originally posted by NikB
Can I have a price for a front strut brace for an S14a.

Cheers

Skint Nik

I second that!

Skint Si:)

[PhilMorrison]

U bad bad man :(

can u quote 4
1 x Front Strut Brace
1 x Short Shifter

Cheers m8
:D :D :D

[bren]

Anyone else? The more people buy the lower the price :) Ill give it a couple of days and then run through all the prices :)

[Ian D]

front/rear anti roll bars (s14a)
are these the good short shifters or the ones that break????? if they are good one, one of them as well.

please! :D

[mambastu]

Originally posted by bren
Anyone else? The more people buy the lower the price :) Ill give it a couple of days and then run through all the prices :)

Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it StStop it Stop it Stop it Stop it Stop it op it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it Stop it

......how about a price for a PDM rear strut brace as well then....................DOH !! :D

[David_S14]

1995-1998 Nissan 240SX S14 New TC Rods with SPF1202K Bushings....... $95 each (2 required per car)
S14 (1994-1998) Front Camber Bolt Kit (14mm). . . . . $25.00/pair
S14 MOOG Tie Rod Ends - ES3407 . . . . . . $32 each (2 required per car)
(S14, 95-98) BNF19Z 27mm *Adjustable * Front Bar . . . . . $140.00
(S14, 95-98) BNR11X 20-22mm *Adjustable * Rear Bar . . . . . $140.00
And a short shifter (which it says are on back order)

Now I'm too scared to add that up so just don't make me ;)

[mike_s14]

Ohhh no hear we go again.......

Please quote me the same as fatty

[bren]

Those of you who want braces, do you want PDM or Whiteline?

Ill do everthing thats pre-ordered at a very good price. Bare in mind that anything that I keep in stock will be more exspensive to justify having capital tied up so if you want something youre far better off getting it now than later.

Not trying to be pushy, just want to pre-empt any complaints about the price differences by explaining the reasons behind them :)

[PhilMorrison]

I'm attracted to the $40ness, so PDM Please :)

[philrob2000]

Same here . For S13 plz Bren. :)
Sounds a v good price for a tower brace.


PDM is pleased to announce this special offer on quality built, beautifully polished aluminum front strut tower bars for your

[Ian D]

I can't see them but i know white line do them, off-set bushs for the rear on a s14a, to correct negative camber. can you get these?

found it! 240SX/300ZX (S13, S14 1989-1998)
Rear Camber Correction Bushings (KCA347) . . . . . NOW $60.00/set i want one errrr or two sets.

[Chimp]

bren,

deffo interested in strut brace (front) s13
and the underspoiler too if you can get a price in sterling :)

thanks

Dan

*edit
1989-1994 Nissan 240SX S13 SPF1202K TC Rod Bushings - price on them too mate please :)

[matt_j]

Ok Bren, i am ready to spend some money:D

price me up for this lot:D i am really hoping that shipping wont be a killer so lets see how it goes....


1989-1994 Nissan 240SX S13 SPF1202K TC Rod Bushings ... $40.00 http://www.pdm-racing.com/products/imag/suspension-11.jpg

S13, 89-94) BNF20Z 27mm *Adjustable * Front Bar . . . . . $140.00
http://www.pdm-racing.com/products/imag/WhitelineRearSwaybar.jpg
(S13, 89-94) BNR20X 20-22mm *Adjustable * Rear Bar . . . . . $140.00 http://www.pdm-racing.com/products/imag/WhitelineFrontSwaybar.jpg

240SX/300ZX (S13, S14 1989-1998)
Rear Camber Correction Bushings (KCA347) . . . . . NOW $60.00/set http://www.pdm-racing.com/products/imag/KCA347.jpg

[NikB]

between the whiteline and PDM strut braces????
Had a quick look but could not see the Whiteline ones listed.

Nik

[NikB]

Ignore me, I was up early this morning for some reason. Just found them, I am also attracted to the $40ness of the PDM bar. Do they do a rear one?

Nik

[simanc26]

PDM = Cheap. Good for me.:D

[bren]

I dont yet know if they do rears, Ill find out :)

NOTE: The PDM front braces wont go straight on an S13. They need a tweak to get them to fit due to the US 240s having a normally aspirated engine with a lower intake.

[mike_s14]

PDM aswell

[Richie]

Short shifter please Bren if the price isn't too inflated by shipping

[bren]

I will keep the prices as low as possible but you lot need to be aware that theres several additions to the basic price.

To start with youve got shipping. Normally on an item like a strut brace this would be more than the brace itself, around $55. Then youve got import duty on the price or the product AND shipping and insurance. On a brace the import duty is 4% but it can go upto 9% depending on the product.

Then youve got VAT at 17.5% ontop of the total purchase price, shipping and insurance and duty!

Ill keep the prices as low as possible but even with the savings on shipping Il make by bringing a load of stuff over at once you should be aware that you wont be getting a brace for $40!!

[RichSeal]

Originally posted by JonnySpeedbump
Can I have a set of the Clear front indicator/sidelight lenses for an S13 please - $30
Ta,
Jonny

Oooh me too, and a PDM strut brace and how much are the quickshifters, and the RB Style Rear wing

Cheers

[kish]

Bren,

Hello mate, I wouldn't mind the following :

Whiteline T/C Rod Bushings - SPF1202K TC Rod Bushings

OBX Short Shifter

Strut brace

All for an S13 please. Let me know when you need the money and when you recon you you'll have them.

Cheers

Kish

[SHELLAC]

for S13,
please

[Enigma]

Bren put me down for whiteline front and rear anti roll bars for an s14a.
Thanx Chris.

[Wacko]

Hi Bren
Can you put me down for a front PDM strut brace and also a pair of clear front turn lenses for my postfacelift
1992 S13.
cheers:D :D :D

[kevin_s14]

PDM front strut brace for an s14a please :)

the $40 delivered one please :D :D

[Vez]

Short shift 4 S14a

I would be interested, though I need to know how easy and what is involved in fitting?

[NikB]

My credit card hasn't been used for at least 2 weeks:D They must think something is wrong:p

Cheers

Nik

[bren]

Ill start getting price sorted today :)

[Kev]

Interested in S13 front and rear strut braces, PDM.

Kev

[Jezz_S13]

Originally posted by bren
Ill start getting price sorted today :)

Cool :cool:, co I need to get some bushes sorted so I can get the front end of my car set up properly.

[NickM]

If it's not too late to jump on board, I'd like:

S14 (1994-1998) Front Camber Bolt Kit (14mm). . . . . $25.00/pair
240SX/300ZX (S13, S14 1989-1998)
Rear Camber Correction Bushings (KCA347) . . . . . NOW $60.00/set

And if they do Whiteline part KCA331 (F caster bush set), I'd go for those too.

Thanks

Nick

[PhilMorrison]

Did u sort some prices for us m8?

[bren]

Im working on them now. Its more difficult than youd imagine because Ive got to convert all the prices into £s, figure out shipping, add import duty and vat and then divide the shipping costs amongst the various items. Then Ive got to work out a reasonable markup and compensate for those who will decide they dont want the parts after all which will result in relative increased shipping costs for each item in the consignment. Phew!! LOL :D

Im on it now though :)

[Papa Lazarou]

And it still won't work out quite right after all that ;) I think thats why most companies over here add such a healthy margin for error....


Originally posted by bren
Im working on them now. Its more difficult than youd imagine because Ive got to convert all the prices into £s, figure out shipping, add import duty and vat and then divide the shipping costs amongst the various items. Then Ive got to work out a reasonable markup and compensate for those who will decide they dont want the parts after all which will result in relative increased shipping costs for each item in the consignment. Phew!! LOL :D

Im on it now though :)

[David_S14]

Wouldn't it be easier to get a deposit of people ?
Give them a week to pay it or stuff is not ordered that way if they then cancel you keep the cash :)

[bren]

Papa,

You hit the nail on the head. It only takes one or two faulty products to come through to feck up the whole thing! That is exactly why companies place what appears to be such a large mark up on the goods. When you consider the hassle involved and the various problems that always arise then the mark doesnt seem so greedy at all.

Im still going to keep the prices as low as possible though :)

David,

I will have to take part of full payment up front as theres a lot of people wanting stuff and Im not laying out for it all myself if Im making very little on it :) Im also bringing a load of stuff over to keep in stock and couldnt lay out for everything anyway as the final bills going to be pretty bit ;) :)

[Richie]

Bren a way around paying import duty (10%) and VAT (17.5%) is to get the company to send it all over as a sample this way you will save 27.5%. Trust me it works I have done it myself and it doesn't matter how big an order it is.

[PhilMorrison]

Hassle Hassle Hassle :D

[bren]

Richie,

Will they take it as a sample even if there 25 of the same items in there? ;)

Fatty,

Im waiting for a rough shipping price so I can break it back down again :)

[bren]

I chqased PDM yesterday and theyre waiting on a shipment of shifters and Whiteline products. They cant price up carriage until theyve got everything there so we just need to be patient :)

[CraZyMoFo]

I'd be interested in a Front strut brace.

Keep me posted with price etc.


Cheers
Greg

[StuyMac]

Bren,

This thread has got quite long now from a combination of people ordering, and the pricing as its from the US.

My question is - is it going to be cheaper from you than if we got them ourselves, or is this just making it easier for us to get them - ie we dont have to work out tax etc???

Obviously, you are going to want to make a profit - you wouldnt be in the business if you didnt, and Im assuming your gonna get a discount for being a trade / buying in bulk, but is the discount verses profit gonna make the deal better for us?

[bren]

Stu,

I you bought the parts yourself then youd pay a chunk more than you would if you buy them in the group arrangement because the carriage you pay will be so much higher.

Even if you fecked me off and arranged the group buy yourselves then youd still end up paying virtually the same amount because I get a trade discount. Ive also got a contract with a courior company in the UK so the internal carriage costs for anything over 2 kilos will be lower with me that youd pay yourselves.

[StuyMac]

Originally posted by bren
Even if you fecked me off and arranged the group buy yourselves then youd still end up paying virtually the same amount ........

Sorry Bren, you misunderstood me a little, and maybe I have misunderstood the P&P costs.

I didnt know what sort of discount you got for bulk buying, so thought Id cover all bases by asking the question - sorry if it came out as sounding like we where gonna gib you off and do our own GB :(

[bren]

The carriage costs on anything from a strut brace upwards are considerable. The brace itself is only $40, carriage on the brace sent by itself is around $64!!

Obviously rthe more products that are brought over at once the cheaper the carriage costs are. Thats why I cant give a definate price on the products until Dom gets me a firm price on carriage for the goods people are after. :)

[Vez]

Quickshift.....

How easy is it to fi tna ddo I have to take gearbox out or do it from in car!!

[David_S14]

Originally posted by Vez
Quickshift.....

How easy is it to fi tna ddo I have to take gearbox out or do it from in car!!

Dead easy to do from in the car. The hardest part is getting the old gear knob off :)

[Vez]

So these are defo dead easy to install then? (Quick shifts)
Can someone confirm this who has done it to there s14a?

If so i want one :D

[simanc26]

My Nismo jobby was from in the car and piece of p to do. :D apart from stupid circlip thingy.

Technical aint I. :D

[Vez]

Me now want one!

[StuyMac]

BTTT,

Any more news on this little batch Bren???

Cheers

[bren]

Not heard back from PDM yet, they are waiting on Whiteline bushes and short shifetrs.

Im going to split the order, Ill post the details soon :)

[bren]

Its just not possible to work out accurate shipping costs without getting a precise order so Im going to have to guestimate prices somewhat.

The spoilers and bodykits cost a fortune to ship because when a package gets above a certain size the shipping companies work out the weight of the product based on volumetic weight rather than actual wight.

This means that a bodykit weighing just 35 kilos will get charged based on a volumetric weight of 138 kilos!! :eek:

The addition of just one extra body kit can double to total shipping cost so theres no way to accurately work out shipping.

Im just going to work it out based on the last consignment.

So, the prices will be as follows:

Whiteline:

S13 front camber bolt kit £28.78
SPF 1202K TC Rod bushings £42.88
SPF 1009K lower front control arm bushes £53.60
S13 Anti roll front £150
S13 Anti roll rear £150
S14 Anti roll front £150
S14 Anti roll rear £150
S14 front camber bolt kit £26.79
Rear camber bushes £64.29
S13 spring kit £214
S13 rear strut brace £107.14

Lights:

S13 driving lights £96.44
S13 clear front indicators £32

Misc:

SSR Performance Racing Oil Catch Tank £80.40
3" MAS adater with Nissan bolt pattern £16
OBX Shortshifter £90.76
PDM front strut brace £60
Moog tie rod ends £68.80 a pair

Bodykits:

Im going to have to try and sort someway of pricing shipping on these, Ill get back with prices asap.

[bren]

I forgot to say, S13 KYB AGXs would work out at £450 a set :)

[Jezz_S13]

Okay I'll have...

S13 front camber bolt kit £28.78
SPF 1202K TC Rod bushings £42.88
SPF 1009K lower front control arm bushes £53.60

[NikB]

Bren,

Put me down for a PDM front strut brace for an S14a.

Cheers

Nik

[philrob2000]

I'll have S13 front strut brace please Bren.

[bren]

Phil,

Youll have to tweak it to get it to fit an S13. Not a big deal but you need to be aware.

[philrob2000]

No problem Bren, I've heard about this, cheers. After all, how hard can it be :confused:;)

[mambastu]

Originally posted by philrob2000
No problem Bren, I've heard about this, cheers. After all, how hard can it be :confused:;)

Its very easy mate, gas blowlamp, 10 minutes and a bench vice :)

[NickM]

I'm in for:

S14 (1994-1998) Front Camber Bolt Kit (14mm). . . .26.69
Rear Camber Correction Bushings (KCA347) . . . . . 64.29
Edited 'cos I'm getting hooked now...
also S14 Front anti-roll bar (BNF19Z) £150 :P

Did you get a chance to check with them whether they can do the KCA331 (F caster bush set)?

Cheers

Nick

[simanc26]

S14a front strut brace please m8 :D

[kevin_s14]

Originally posted by simanc26
S14a front strut brace please m8 :D

yep, me too, youve got my details so just take what you need for deposit:)

[Mike_S13]

A few questions Bren:

When will you start taking payments?
When do you think (roughly) you'll have the parts in stock?
Do the prices include delivery from you to us?

BTW, i'll have some clear front indicators (late type) and driving lights for an S13 please :)

[RichSeal]

Cool, put me down for the S13 clear front indicators and a strut brace.

Cheers
Richard

[Wacko]

Yeah, same for me as well please , does that come to £92 ?

[Andy Dee]

I've left it late, but if they are still available i'll have the S13 clear front indicators and S13 front strut brace.


Cheers

Andy

[XEB]

Bren,
can you get me a tower strut brace please $40
David

[andyb]

Bren is it too late to order an item?

[bren]

No its not too late, what are you after?

[Jezz_S13]

When are you doing the order? My tension rod bushes are bleeding. :(

Those bloody AGX shocks are tempting me bren, tell them to stop. :(

[bren]

Friday, no later than Friday :) Yum yum, AGXs ;) LOL

[andyb]

Could I get a set of these please

S13 clear front indicators £32

Thanks

[andypat]

BREN I WILL HAVE A SET OF THE TENSION BAR BUSHES WHITELINE $40
THERE ARE A LOT OF GOODIES ON THERE BUT MR PLASTIC WONT HAVE ANY OF IT WHEN DO YOU WANT PAYING FOR THE BUSHES:D :D :D

[Ian D]

i will have some s14a Rear camber bushes £64.29 PM when you want the money.

are you going to stock stuff? i want anti roll bars front/back just don't have the free money at the moment!

[Billy]

I'll have a pair of TC bushes too please.

:)

[Kev]

Ill have a S13 strut brace, or both if ur offering?

When do u need the dosh?

Are u gonna go to Billing Bren?

Kev

[Andy Dee]

I've left it late, but if they are still available i'll have the S13 clear front indicators and S13 front strut brace.

I keep see-ing this post and getting tempted:mad:

Can i add a shortshift for S13?

[bren]

Andy,

No probs.

Other Andy,

No probs :)

Ian,

Im going to stock some stuff but dont know about the anti roll bars. If you put a small deposit on them then Id bring them over and sit on them for a while if thatd be ok?

Billy,

K

Kev,

K :) Im hoping to stand at Billing :)

Andy,

No probs :)

[mitch]

can ya get the metal pipe work that gose from ingection chamber to the intercooler and from turbo to inter cooler cheers bren

[Enigma]

Bren in addition to the front and rear anti roll bars can I also order a short shifter, all for an s14a. Cheers, Chris.

[bren]

mitch,

I can get stainless pipe made to just about any specifications. Are you running a standard ic?

Enigma,

No probs :)

[bren]

And a front and rear anti roll bar for Ivan for his S14a. :)

[mitch]

bren yep standard for now so i think i only need the 2 pipes correct also why my credit cards out need some plugs that dont melt after about 4 weeks a price for both would be good cheers bren

(standard ic)

[NikB]

...are you gonna place the order???? I NEED shiney bits, slobber slobber, SHINEY...:D

[Ivanski]

Originally posted by bren
And a front and rear anti roll bar for Ivan for his S14a. :)

Posted by telephone, how cool is that :)

As soon as my membership pack comes through I'll be adding a few more things Bren, if that's OK ;)

I

[Kev]

So have u decided bout billing yet Bren?
And btw did that extra samco hose (purple3 or 5mm) come through yet?
And what sort of stuff will u be bringing?

And when do u want payment for the braces?
can u get front and rear btw? or just front?

Kev

[bren]

Mitch,

Why dont you go for a Saab ic and get the pipework to suit that? You might as well kill two birds with one stone :)

Ill have to look into standard pipework as its not something that anyones asked for so I dont have a design for them.

Denso Iridium high performance IQ24s will set you back £42 :)

Nik,

Didnt get chance to order the stuff yesterday but will do today :)

Ivan,

No probs :)

Kev,

I need to get a stall sorted this week. If I can rush it through it time then Ill be standing. Having said that I intend to be there either way, although if I cant park my Cossy in the main enclosure then Im going in our Pug turbo diesel estate work horse wrecker type vehicle!

I got some purple hose through yesterday but Ive lost it!! :rolleyes: Where the feck is it?? Anyway, Ill get it out to you on Mon to arrive Tuesday :)

Whiteline rear braces are £107 if thats any good? PDM are developing a batch but they arent ready :(

[Kev]

No need Bren, if ur coming to Billing then ill get it off u then.
Id rather have two braces the same Bren so ill just have the pdm front, and ill wait for them to develop another for the rear.

Kev

[Jezz_S13]

Ah Bren, when will these be here, did they say when you ordered them? :)
I'm just sooooo looking forward to taking my car to bits again.

Ah BTW the pads arrive, cheers mate. :) Do I owe you more postage?

[bren]

Kev,

k :)

Jezz,

The orders been sent, just waiting for confirmation of total price so the payment can be paid and then its just sit back and wait baby :)

I think the total price will be well over £2k so Im going to need payment up front. Ill post details asap :)

[Ivanski]

Originally posted by bren

...so Im going to need payment up front. Ill post details asap :)
Hasn't this thread gone quiet ;)

[NickM]

Any news on this one, Bren?

Cheers

Nick

[bren]

Some company in Germany bought all of the OBX shifters and PDM are waiting on a replacement batch to arrive.

[Kev]

Bren, is it too late?

I met Mr. Jibber at Billing and he promptly handed me over his old strut brace.
What a very very very nice man :D :D :D

So i dont actually need a front brace anymore.

If u have ordered them, then ill take one, but if not, can u cancel it for me?

Dont worry, im sure ill spend the money on something else of urs anyway:rolleyes: :D

Kev

[bren]

No worries Kev, Im sure someone else will want it at some point :)

Nice to meet you btw :D

[Kev]

Ok mate, great.

But if u have a hassle getting rid, i will defo take it, ive been harping on about one for ages.

And nice to meet u also, sorry if i was slabbering a tad, id had a wee bitty to drink and feck all to eat, and had been driving from 4am.

Kev

[bren]

Originally posted by Kevs 200sx
sorry if i was slabbering a tad, id had a wee bitty to drink and feck all to eat


Is that Scotty talk ;) LOL :D

Like I say no worries about the brace, Im happy to keep an extra one in stock so nee bother ma wee matey. See, Im learning Scotty talk LOL :D

[Kev]

Aye yer gittin there matey, jist a weeeeeee bit tae go..............


:D :D :D

[bren]

RALMAO :D :D :D

[philrob2000]

Just checking that I'm still OK for me strut brace.:)

[Ivanski]

Just making sure this one doesn't get lost in the noise :)

Any idea's when the new batch will be in Bren, I notice your still online :D

Cheers

[bren]

Ill email PDM for an update now :)

Btw, just because the BB says Im online doesnt mean I am as the computers dont get switched off and Im on broad band so if I leave a browser open on the SXOC itll think that Im still here as well :)

[Jezz_S13]

Bren, I'm going to order some bits (all rear subframe bushes and Anti-Roll bars) directly from Whiteline as they only take 4 days to arrive and PDM are taking the piss with this so can you cancel the bits I ordered please.

Cheers,
Jezz.

[bren]

No problem. PDM have everything ready to go now, they are getting a total price with shipping and then theyll be on their way. Another week should do it :)

[Si T]

bren, will that include the Cusco strut braces and Greddy guage pod? (I`m the impatient type if ya hadn`t noticed ;) )

[NickM]

any more news from PDM, Bren? (and thx again for sorting out the pads and hoses :) ).

[RichSeal]

When do you want the ££ by for this stuff? (and is it ever going to get here :D)

[bren]

Si,

No, they are coming from Japan but should be on their way now :)

Nick and Rich,

Sorry about the delay. After waiting weeks for PDM to get everything we needed in stock I mailed them to sort payment and some fecker in Germany had bought the entire consignment of OBX shifters :rolleyes:

Everything was back in stock last week and the orders gone through so the parts should be on their way now :D

[JackaL]

Originally posted by bren
Everything was back in stock last week and the orders gone through so the parts should be on their way now :D

Everything?! :D

I feel like it's Christmas again! :)

I'd better get down Halfrauds for some black hammerite so those anti-roll bars don't look so blue :( Damn insurance.

[Si T]

Originally posted by bren
Si,

No, they are coming from Japan but should be on their way now :)


WOOHOO not done owt to me motor for a month now! I think I`m developing Tuning Withdrawal Syndrome;)

[Ivanski]

Originally posted by JackaL
I'd better get down Halfrauds for some black hammerite so those anti-roll bars don't look so blue :( :D

On their way, nice one Bren!
I'll be able to do the bars & shockers in one go, good thing too, driver's rear has *stopped* leaking fluid.
Doh! :o

Cheers