View Full Version : Cheltenham meet - Saturday, April 2nd.
disco-tom
26-03-2005, 17:33
Reet folks.
See you at the usual spot from 2pm. :wave:
And me :thumbs:
Very slim chance of the 200 showing it's face, but fingers crossed :D
again i'll be missing this one :cry: :annoyed:
disco-tom
27-03-2005, 15:58
Ahh, never mind mate. :(
Get your insurance sorted, the engine into the new shell and then see about turning up. :thumbs:
S14a shell?
yeah i'll be there when shes sorted :)
No S14 shell mate, the insurance are going to rape me enough as it is.
Cheers Tom :thumbs:
msstyles
28-03-2005, 19:08
Ill be there was on holiday for the last one
adrian bill
28-03-2005, 23:24
hope to be there :thumbs: any more s13's out there that would like to join us? i've seen looooads around cheltenham, :eek: so come on get your buts down there! :D vics ;)
She's a runner :D :D :D :D :D :D :D :D
5 months offf the road, rebuilt bottom end, new gear box, and the bitch started 1st turn of the key :smitten:
Haven't had a test drive yet (cos the neighbours have decided to park 3 cars in front of my drive :rant: ) but at least the engine works now :D
Doubtful if I can arrange MOT, tax and insurance by Saturday (and finish putting all the bits back together :wack: ), but it would be nice to up the numbers for the S13's :D (Where are you Barry ???)
Edit:cos I used too many smilies apparently - can't think why :wack:
hope to be there :thumbs: any more s13's out there that would like to join us? i've seen looooads around cheltenham, :eek: so come on get your buts down there! :D vics ;)
Me too Vics, I always see flippin LOADS of s13s around cheltenham... :rolleyes:
See y'all there anyway:thumbs:
PMC 0503
31-03-2005, 20:45
Hope to make this one, so see you at about 2ish :thumbs:
disco-tom
02-04-2005, 20:26
Good meet today folks. Lovely weather and nice to see everyone. :) ;)
Nice to see everyone again! Who was that in the K plate black S13 then? (apart from vik that is)
I've got some pic's, i'll prob host them tomorrow
Ad.
disco-tom
02-04-2005, 22:26
Host them now, slacker!! :smash:
mad mark
03-04-2005, 11:42
Well you go for a drive to check the boost after a bit of tinkering, and think mm i'll go back now.
Find a nice pub car park to turn round in and hey presto there is a sxoc meet.... :thumbs:
i'll try and see if i'm free for the next one..
regards
mark
Nice to see you all yesterday :thumbs:
disco-tom
03-04-2005, 13:26
Glad you decided to park up and join in the meet, Mark. :thumbs:
PMC 0503
03-04-2005, 20:32
Cool meet, reminds me why the joy of owning a performance nissan is more then the sum of its parts :D
Tom/Phil
Re boost got 10-7psi on the way home. Noted the number of threads visible on the bren then took it apart, put a very thin smear of lithium grease on the ballbearing and refitted in the same way. Did a quick run and i'ts back to 14.5 psi. I think I,ll leave it alone for now, if it goes a bit lazy again I'll wait and see if it rights itself. Thanks for the advice ;)
Webbster
03-04-2005, 21:57
Hi guys i was the guy in the black 200 at the chelt meet it was my fist time my name is craig (webbster) sorry i didnt talk much bit shy i guess, sorry i couldnt stay long, hope 2 b at there next time and stay longer
Cool meet, reminds me why the joy of owning a performance nissan is more then the sum of its parts :D
Tom/Phil
Re boost got 10-7psi on the way home. Noted the number of threads visible on the bren then took it apart, put a very thin smear of lithium grease on the ballbearing and refitted in the same way. Did a quick run and i'ts back to 14.5 psi. I think I,ll leave it alone for now, if it goes a bit lazy again I'll wait and see if it rights itself. Thanks for the advice ;)
Glad you got it sorted:thumbs:
Hi guys i was the guy in the black 200 at the chelt meet it was my fist time my name is craig (webbster) sorry i didnt talk much bit shy i guess, sorry i couldnt stay long, hope 2 b at there next time and stay longer
I turned up really late so didn't meet ya. Was workin on the car tho..see ya next time:)
Sorry i missed u guys, working on the car too phil :thumbs: Bought a new turbo but its gone a bit pete tong with the fitting.. Fecking EGR pipes :annoyed:
Here's a few pic's guys, should of got some more really as it was such a nice day! :)
Hi craig next time come over and talk to us, we don't bite! ;) Wanted a good look at your S13 too!
http://www.sxoc.co.uk/images/dynamic/memberimgs/lores/2005442011327.jpg
http://www.sxoc.co.uk/images/dynamic/memberimgs/lores/2005442030447.jpg
http://www.sxoc.co.uk/images/dynamic/memberimgs/lores/2005442011330.jpg
http://www.sxoc.co.uk/images/dynamic/memberimgs/lores/2005442030456.jpg
http://www.sxoc.co.uk/images/dynamic/memberimgs/lores/2005442011350.jpg
http://www.sxoc.co.uk/images/dynamic/memberimgs/lores/2005442030460.jpg
http://www.sxoc.co.uk/images/dynamic/memberimgs/lores/2005442019316.jpg
Edited cuz i didn't take the number plates out! :rolleyes:
Nice pics Ad :thumbs:
My car failed the MOT miserably :annoyed:
N/S/F outer chassis corroded to excess, O/S/F floor corroded to excess, O/S/R floor corroded to excess, N/S/R brake pipe corroded to excess, O/S/M outer sill holed within seatbelt mounting area, corrosion at rear petrol tank mounting :annoyed: Rust, Rust. bloody rust :annoyed: Anyone know a good (cheap!) welder :wack:
After all the work I've put in over the last few months, I feel like giving in :cry:
disco-tom
04-04-2005, 21:32
Ooof, that's a shame Ramps. I don't know any bodywork guru's that could help out cheaply, sorry. :(
Ad, nice work on the pics, dude. :thumbs: Can't even see where I ripped my sticker, either. :wack:
Arrrh balls ramps mate! I'll ask about and let you know if i can find anyone for ya!
I had to post up that sticker pic mate... just to make you see the light if nothing else! :)
Nice pics Ad :thumbs:
My car failed the MOT miserably :annoyed:
N/S/F outer chassis corroded to excess, O/S/F floor corroded to excess, O/S/R floor corroded to excess, N/S/R brake pipe corroded to excess, O/S/M outer sill holed within seatbelt mounting area, corrosion at rear petrol tank mounting :annoyed: Rust, Rust. bloody rust :annoyed: Anyone know a good (cheap!) welder :wack:
After all the work I've put in over the last few months, I feel like giving in :cry:
If you can weld mate i have a welder with loads of wire you can use :D I can't weld for shit though :wack:
Hi people, nice seeing you all again and glad your all ok :) . I went to view an s13 on Sunday and it was very tidy........ however due to lack of funds i couldnt afford it so my mate bought it instead. :) I think he said he will pop up next meet :thumbs: . The pictures look good, one day i might actually have a photo of mine on the board... hmmmm feckin tyres, tax & mot i might bring a collection box up next time :wack:
adrian bill
04-04-2005, 23:26
nice one Ad :thumbs: cool to see pics of our car! :D and thanks for the boost gauge all seems to be reading properly and we are running 14psi which is good! and hi to craig and mate :wave: was cool to see another black s13 with same beginning on number plate too! :eek: sorry to hear about that ramps, i'm gutted for you, hope you can get it sorted cheap! but dont give up on it ;) anyway nice to see everyone again :) sorry i missed you cHiL but did see you on Tewksbury road saturday night ;) see you all next month, vics :)
If you can weld mate i have a welder with loads of wire you can use :D I can't weld for shit though :wack:
Same here :D
Got all the kit at work, but no-one to use it. :rolleyes: Last welder we had was really good - he replaced all the inner and outer sills for my last MOT for next to nothing, so thought it would fly through this time. Just all the bits he didn't do have gone now :wack:
Guess I'll have to get a new shell - shame, cos it's taken me 2 years of bloody hard work to get it looking how it does now :annoyed: I should have done more to the bits you can't see :smash:
Guess I'll have to get a new shell - shame, cos it's taken me 2 years of bloody hard work to get it looking how it does now :annoyed: I should have done more to the bits you can't see :smash:
What a pain in the ass ! :annoyed:
What a pain in the ass ! :annoyed:
:nod: but sod it. The 40 mile drive "to and from" the mot centre ;) made me sure its worth doing.
Just need a shell with good bodywork and a shagged engine and swap all the good bits over from mine :D
Seen a few possibles already :) Only prob is transporting them back to my place - how did you get yours back to Ad's?
PMC 0503
05-04-2005, 09:04
Ramp; sorry to hear about the body, good luck in your search for a new shell.
Olly; James at my works mentioned that somone he knows just got an S13. He says he knows you, so I guess thats the same one. Look forward to the meets getting bigger possibly ;)
Seen a few possibles already :) Only prob is transporting them back to my place - how did you get yours back to Ad's?
A mate of mate did it, very reasonable price to. www.ZoomMotorSport.co.uk try him :nod:
A mate of mate did it, very reasonable price to. www.ZoomMotorSport.co.uk try him :nod:
Cheers I'll give them a try :thumbs:
Alright PMC , yeah it must be the same person. He is picking it up friday, it will be intresting finding out what he thinks of it. The guy that bought it used to own a RB5 imprezza and has recently perchased a Astra GTE which is on carbs :) (animal). He is in the process of rebuilding his cosworth and needs something to buy the time, however he has said that its a car that he has wanted for a while and now he has one. I'am not sure how it will compare to the other but then again its all about having fun :thumbs:
After all the work I've put in over the last few months, I feel like giving in :cry:
Or maybe I'll just buy a few more :D
No. 2 (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=4540827506)
No. 3 (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=4541182345)
:thumbs: Bargin, Hope you get it sorted Ramps :)
adrian bill
13-04-2005, 10:23
nice one ramps :thumbs: looks like you'll be busy again for a while :D glad you can get it sorted now ;) vics :)
vBulletin® v3.8.5, Copyright ©2000-2010, Jelsoft Enterprises Ltd.