View Full Version : New S13 exhausts nearly ready complete with 3" front pipes :)
We have made some more design tweeks and the S13 systems are nearly sorted now :)
Im aiming to sell them as a complete turbo back system and should have the price below £400. They should be a decent noise level too due to a few tweaks we have made :thumbs:
Bean Bandit
04-02-2005, 13:54
interested to see some noise levels on that - how many parts will the system have (i.e. backbox, mid section, downpipe with separate cat replacment or one piece) ?
I wont be less than 85db, I can tell you that now :no:
It will be a three piece system with front pipe with built in silencer, mid section with silencer, and rear section with silencer. The silencers are all high flow items.
The system will come with bung and all gaskets and bolts. It will be 3" throughout, stainless steel and mandrel bent.
What is the noise level of the single box S13 exhaust do you know? Is the new system much quieter?
liquidsmoke
07-02-2005, 01:35
3 silencers! Are they straight through silencers? like, just perforated tube inside with wadding around it?
blobsta,
The front pipes will be avaliable by themselves :nod: I need someone to test the new front pipe. I wont go on our car because we have an S14 decat, front pipe and turbo elbow. Fancy a cheap front pipe? Id send you a noise meter with it and would need a before and after db reading if possible. Youd get the pipe for £50 in return :)
Terry,
The new system is significantly quieter than the old system but its still loud hence the third silencers.
All the silencers are straight through free flowing items so performance will barely be effected :)
The new prototype front pipe has just landed. Do you want to try it blobsta? :)
Pic:
http://www.sxoc.com/vbb/attachment.php?attachmentid=15016&stc=1
When do you think the systems will be ready Bren?? :) :)
how much would that downpipe with the silencer built in cost on its own...if you are going to sell them seperate to the whole system that is? :)
i've currently got one of your 2.5" d/p but am after something a bit quieter :)
cheers :thumbs:
MeLLoN Stu
11-02-2005, 23:45
mmmmmm :smitten:
Ooooh, and I got paid twice this month as well :D
I'll be having one of those I feel :)
I am sure this is a really stupid question, but I take it that this comes with everything I need to put it on?
Chiz :)
MeLLoN Stu
12-02-2005, 00:39
might need gaskets :)
I'm really wanting one of these, my current apex with no cat and stripped out interior is just a little too much, plus the noise regs at some places make it a pain.
Would catback system still be £299 on it's own?
Surely with three silencers this system will be very. very quiet?
The S14 twin box system comapred to single box was meant to be very quiet, so a three box S13 system would be quieter still? Or are the silencers slightly different?
Looks very nic ethough, would definately conisder one of thos front pipes to replace my current SE one, how much would they be on their own?
Also, whilst my mind is ticking away, is it possible that someone could doa dB test on one of these silenced d/p's with the single box system? Or would this still be pretty loud?
blobsta,
Can you give us another shout please, no one took any of your details so the pipes still sat here :rolleyes: :)
They come with gaskets, nuts bolts, etc :)
The front pipes alone will be around £120.
S13s are very loud for some reason, considerably louder than S14s hence the additional silencer. We will have a db reading done with a single box and the new front pipe :)
can i test it please!!!!! :D
What about me Bren, I live in Bradford have a std exhaust at the mo could do noise tests on both :Plug:
2.3_ben.a is trying it for us. We need someone with a noisy system to do before and after tests and he has a single box system so is ideal :)
Will you still be able to buy a cat-back system, or are you only doing it from turbo back?
You will be able to buy cat back too :)
How are things progressing with these beauties Bren??
We are making yet another change. Even with a THIRD silencer in the front pipe the exhaust are loud :annoyed: :rolleyes:
We are now going for a box shaped silencer in the mid pipe to see if its more efficient than the sleek type being used at the moment :)
You cant accuse me of not trying with the design of these exhausts!!
Sorry, pestering again, just wondering how these are going as I'm getting really itchy for a new exhaust :)
Cheers :)
EqualizerCS
06-04-2005, 00:34
@bren
I am very interest of your new exhaust system, will you also offer it for 299 pound too? Makes it about 90-95db with a original front pipe? Can you send me a message when the cat-back system is finished to offer?
Greetings
EqualizerCS
VoodooRhythm
09-04-2005, 23:33
Have these been tried with an exhaust control valve at all??
I'd love to get a decent exhaust, but would need a control valve so as to keep the neighbours kinda happy.
Yeah theyre £299. Theyve not been tried with an exhaust valve.
The first one was fitted and tested a while ago, they drop the noise level by around 4db once theyve coked up :)
Thats a good reduction in volume seeing as a 3db increase doubles the volume. Can you supply the db reading at 3000rpm ?
It was a customer who took the readings with our test meter. The meters back here now so we cant do anymore tests :no:
Any idea when they ll be ready to purchase :confused:
Early May :) Hopefully, if the manufacturers stick to their lead times.
Badasssx
20-04-2005, 23:45
will you still offer the version without all the silencers?
No, they are too loud for the majority of people.
EqualizerCS
21-04-2005, 22:10
Can you finally say how much db they will make? Will they reach about 95db?
Greetings
EqualizerCS
95db measured how? On a drive past, at 4500 rpm etc?
Bean Bandit
22-04-2005, 11:01
95db measured how? On a drive past, at 4500 rpm etc?
at 4800 rpm, about 7m away from the tip ;)
98.78db with a 3km/h westerly wind and 18 degree C ambient temps ;) :p
i think that was the british airways 8:00am glasgow to london u picked up ther :D :D
EqualizerCS
23-04-2005, 19:54
95db measured how? On a drive past, at 4500 rpm etc?
Would the exhaust reach 95db(A) by standing at 4000-5000 rpm?
Greetings
EqualizerCS
EqualizerCS
26-04-2005, 19:08
But not about 112db(A)? The Tüv allows only 112db(A), not more :D
Greetings
EqualizerCS
EqualizerCS
02-05-2005, 23:03
@Bren
When you can offer the new "Cat-Back System"? My exhaust is rusty and until the next 2 month I will need a new one :annoyed: Beside I am very horny to test your new generation of 3" exhausts :thumbs:
Greetings
EqualizerCS
Theyre due early May so they should be through soon but Ive not had any communication from the manufacturer for a while. Ill send them an email now.
wippy s14a
07-05-2005, 20:13
Any news? Oops logged on at wippys, its Terry Baker incase you wondered why he was asking.
Sorry about that bren, heard anything yet? as im exaustless :D
I'm interested in the comparative loudness between these and the Mongoose :)
I need to get mine replaced soon, and I've had my eyes on the Mongoose, but then I spotted this, and went "hmm".
Even with the standard exhaust I get one guy at work complaining "Your turbo makes the whole building vibrate!" :rolleyes:
Of course, he drives an old cavalier that leaves a cloud of blue smoke behind it where-ever it goes :D
EqualizerCS
08-05-2005, 18:27
I hope next week you will get the exhausts, because I want make my neighbours angry with it :thumbs: Any news?
Greetings
EqualizerCS
We have some exhaust that should be ready at the end of the month but I don't know exactly what's coming until we get a shipping list through.
We do know exactly whats coming through. We have S14 cat back systems, S13 cat back systems, S13 3" front pipes and S13 3" silencer front pipes on order. Theyre due towards the end of the month now. The suppliers originally said the beginning of May, now they say the exhaust will be ready mid May :)
EqualizerCS
11-05-2005, 10:16
I am out, I don't need one any longer. I have order one of Megan Racing ;)
Greetings
EqualizerCS
200sxkids13
16-05-2005, 16:19
Bren
If the new exhaust for the S13 is now available, can we please have a price for the complete system (presumably including all gaskets etc) and some photos.
Want to replace the Mongoose now we have gone to Stage 3.
Regards
John (THE WRINKLY) sorry, using the sprogs SXOC name (to lazy to log him out and me in)
Theyre not available yet, theyre due end of this month :)
200sxkids13
16-05-2005, 16:34
Bren
Hope you have found the order for brake pads
John
Yeah, someone bought the last three sets earlier today. Im trying to free up another set for you now.
PrimeraRacer
27-05-2005, 22:56
Quick Q Bren.
I have a non CAT Facelift and the front pipe already has a silencer on, will your front pipe make this setup any quieter or would it be awaste of time?
also are you able to provide just bungs on their own? I have a single box system and its far too loud! I need a bung for a 4" tail piece and some way of making the exhaust quieter!
Cheers
Kev
Ive no idea, it depends on what type of silencer you already have. We have 4" bungs in stock, theyre £27.50.
Theyre going to be here any day now :) We dont do a cheap elbow as the only ones Ive seen havent been good enough.
Hi Bren, Would one of these exhausts fit a 1998 180SX?
EqualizerCS
02-06-2005, 02:31
@Bren
Is the new generation of the cat-back exhaust avaible now? I heard that these are the same products like ss-autochrome or XS-Racing. I have seen a sample of the systems and I would say that they have big middle pots.
Greetings
EqualizerCS
You heard wrong.
The shipment will be here tommorrow.
EqualizerCS
02-06-2005, 17:36
Great, can you make some good pics? And one good of the middle pot? I would be very thankful and I think that I am your first customer for the new cat-back exhaust for the S13 :)
Greetings
EqualizerCS
Great, can you make some good pics? And one good of the middle pot? I would be very thankful and I think that I am your first customer for the new cat-back exhaust for the S13 :)
Greetings
EqualizerCS
Oh no yout not :D :wave:
EqualizerCS
03-06-2005, 15:52
@Bren
Did they come today?
Greetings
EqualizerCS
EqualizerCS
03-06-2005, 17:45
Yes, that's great. Can you make some pictures, before I want to buy one cat-back system I want to know how big the middle pot and the hole system is, I hope it isn't a problem :)
Greetings
EqualizerCS
Here you go, pics on this thread:
http://www.sxoc.com/vbb/showthread.php?p=1644598#post1644598
Powered by vBulletin® Version 4.1.9 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.